Document ID: 107271
Updated: May 25, 2008
Contents
Introduction
This document explains how to change the Cisco CallManager IP address with which the Cisco Unity is integrated. This needs to be done if you migrate the IP address of a Cisco CallManager with an existing Cisco Unity integration and needs to continue with the same integration.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
-
Cisco Unity
Components Used
The information in this document is based on the Cisco Unity 4.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Change Server IP Address
You need to change the IP address of the Cisco CallManager through the Cisco Unity Telephony Integration Manager (UTIM).
Cisco Unity Telephone Integration Manager
Complete these steps in order to update the new Cisco CallManager IP address on the integration settings, on Cisco Unity:
-
Choose Start > Programs > Unity > Cisco Unity Tools Depot.
-
Choose Switch Integration Tools and double-click on Telephone Integration Manager, which opens the UTIM.
-
Click Modify and change the IP address with the new Cisco CallManager server.
Click Save in order to save the changes in the Cisco Unity Telephony integration.
Related Information
Open a Support Case 
(Requires a Cisco Service Contract.)
Related Cisco Support Community Discussions
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.