Cisco IP SoftPhone integrates with the directory service that is installed on the Cisco CallManager. Additionally, the Cisco IP SoftPhone provides a personal directory for you to store directory entries that are not available in the corporate or public directories. It also integrates with other private directories like those implemented by various email clients.
This document takes you through the steps to verify whether directory services are operative with IP SoftPhone. For information on how to configure the Cisco CallManager server to support IP SoftPhone, see Installing and Configuring Cisco IP SoftPhone.
Cisco recommends that you have knowledge of these topics:
Cisco CallManager Administration
Windows 2000 Terminal Services
The information in this document is based on these software and hardware versions:
Cisco CallManager version 3.0 (revision 6 or later).
IP SoftPhone Version 1.2 or later, if you use Cisco CallManager 3.1.
Windows 95, Windows 98, Windows NT 4.0 (SP4 or greater), or Windows 2000.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
This document lists the steps you need to perform in order to verify Cisco IP SoftPhone Directory Services. The steps are broadly categorized into three major tasks.
Complete these steps:
Click the icon shown in figure 1 to view the list of configured directories.Figure 1 – The Directories Icon
The Address book is displayed, as shown in figure 2.Figure 2 – The Address Book
Select a directory for your address book from the pull-down menu. Click Show All to view a list of users.Figure 3 – Select a Directory
Note: IP SoftPhone lists only up to 500 entries at a time.Figure 4 – Message to State that Only 500 Entries are Shown
Entries come up if the directory services are operative.
Click the View Info button to view all the fields in the highlighted record (see figure 5).Figure 5 – The View Info Button
If the list of directory entries appears, you need not perform any further action. However, if the directory is unavailable, or the directory entries do not appear, proceed to Task 2. In this case, click Close.Figure 6 – When Directory Entries Do Not Appear
Complete these steps:
Click the Settings icon shown in figure 7.Figure 7 – The Settings Icon
The Settings screen is displayed.Figure 8 – The Settings Screen
Click the Directories tab, and select the appropriate Directory Name.Figure 9 – Select the Directory Name
Click Edit to view the settings associated with the directory.Figure 10 – View the Directory Settings
By default, the LDAP server of Cisco CallManager listens at port number 8404, and the Search Base is ou=users, o=<domain name>. In this example, ou=users and o=cisco.com.
If SoftPhone is configured to get information from a non-CallManager LDAP server, verify the settings.
If the directory settings on SoftPhone are correct, proceed to Task 3. Click OK.
An easy way to check whether an LDAP server is working, is to try and reach the server from a web browser. Complete these steps:
Type ldap://<server name: port number>/<search base> into the address field of the browser.Figure 11 – Reach the LDAP Server from the Web Browser
There are a few possible results. If the server answers on the specified port and the o= value is correct, the Properties window appears.Figure 12 – The Properties Window
If the server listens on the specified port, but the search criteria are incorrect, (we used the URL: ldap://crusader:8404/o=bogusdomain) this message appears:Figure 13 – Message to State that there are no Matching Entries
The URL format for LDAP requests is outlined in RFC2255. If you are not certain about the correct search base, you can find the Cisco CallManager Directory configuration in the system registry of CallManager under:
HKEY_LOCAL_MACHINE > SOFTWARE > Cisco Systems, Inc. > Directory Configuration
If the LDAP server does not listen at the port specified, (we used the URL: ldap://crusader:389/o=cisco.com) this message appears:Figure 14 – Message to Indicate that the LDAP Server is not Reachable
As with the message above, verify the directory configuration. If the directory configuration checks out, the state of the server will have to be examined. Go to Programs > Administrative Tools > Computer Management.Figure 15 – Navigate to Computer management
The Computer Management application appears.
Under Services and Applications, click Services.Figure 16 – The Computer Management Application
Scroll down, until you locate the DC Directory Server.Figure 17 – Locate the DC Directory Server
Check the Status field. If the service is started, but does not answer requests, restart the service. Right-click on the DC Server. The menu shown in figure 18 appears.Figure 18 – Restart the Server
However, if the status is not Started, right-click on DC directory server, and then select Properties.
The DC Directory Server Properties window appears.Figure 19 – The DC Directory Server Properties Window
The Startup type must be set to Automatic.
Click the Recovery tab to view the recovery options.Figure 20 – View the Recovery Options
Select Restart the Service in all the failure fields.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.