Guest

Cisco Unified MeetingPlace

MeetingTime Port Utilization Report

Document ID: 50026



Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Determine the Percentage
Related Information

Introduction

This document explains how to determine what percentage you will see on the Port Utilization Report when 100 percent of your schedulable ports are booked out.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco MeetingTime (all versions).

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Determine the Percentage

Complete these steps:

  1. Determine the number of schedulable ports you have set. Check your Cisco MeetingTime setting under Configure tab > Server Configuration. The calculation is:

    number of conference ports
    –    number of contingency ports
    –    number of floater ports
    +    number of overbook ports
    ____________________
    
    = number of schedulable ports
    
  2. Determine the percentage when all of your schedulable ports have been booked out. The calculation is:

    [number of schedulable ports (from Step 1) / number of conference ports] x 100 = the percentage of your schedulable ports booked out.

    Example:

    120 conference ports
    -    1 contingency port
    -    5 floater ports
    +    20 overbook ports
    ____________________
    
    134 schedulable ports
    
    [134 / 120] x 100 = 112%
    

    When you view the Port Utilization Report and the dotted line reflects 112 percent, your system is completely booked out.


Related Information



Updated: Jan 31, 2006 Document ID: 50026