MeetingPlace Server TCP/IP and UDP Ports [Cisco Unified MeetingPlace]

Document ID: 48263

PDF Downloads

MeetingPlace Server TCP/IP and UDP Ports

Related Discussion

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Most Commonly Used Ports
      TCP 5001
      TCP 5003
      TCP 5005
      TCP 23
      TCP 21
      TCP 80
      TCP 1627
      TCP 443
      TCP 25
      TCP 1503
      TCP 389
      TCP 1443
      TCP/UDP 161
      UDP 162
      UDP 123
      UDP 514
      UDP 7070
Cisco Support Community - Featured Conversations
Related Information

Introduction

This document lists some of the most common TCP/IP and User Datagram Protocol (UDP) ports used in the Cisco MeetingPlace environment.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco MeetingPlace server software (all versions).

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Most Commonly Used Ports

All of the applications use the same ports to communicate with a Cisco MeetingPlace server.

In addition, there are a variety of ports used between Cisco MeetingPlace conference servers and the MeetingPlace network server. It is recommended that you allow unrestricted TCP and UDP traffic between networked conference servers.

Communication between the gateway system and non-MeetingPlace systems is more application-specific and much more complicated.

This is the complete list of ports:

TCP 5001

This port is used by Cisco MeetingTime, Cisco MeetingPlace Web, and gateway products. It is opened from client (such as Cisco MeetingTime) to server.

TCP 5003

This port is used for the Cisco MeetingPlace Gateway SIM.

TCP 5005

This port is used for file transfer between a conference server and Cisco MeetingTime, Cisco MeetingPlace Web, or a gateway. It is opened from client to server.

TCP 23

This port is used for Telnet (for service login).

TCP 21

This port is used for FTP.

TCP 80

Cisco MeetingPlace Web typically uses TCP port 80 for client access (HTTP), but that can be changed. It also uses domain name services on UDP port 53. TCP port 80 is also used between the Lotus Domino server and the MeetingPlace for Notes Gateway.