Document ID: 111873
This document explains the procedure to configure an agent to be automatically recorded in Cisco Agent Desktop.
There are no specific requirements for this document.
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to the Cisco Technical Tips Conventions for more information on document conventions.
In this section, you are presented with the information to configure an agent to be automatically recorded in Cisco Agent Desktop.
Complete these steps in order to configure an agent to be automatically recorded in Cisco Agent Desktop:
From the UCCX server, choose Start > Programs > Cisco > Desktop > Admin, and launch Cisco Desktop Administrator.
Select your call center, and expand the Work Flow Configuration.
Select Work Flow Groups, choose File from the top of the screen, and click New.
Enter the Work Flow Group Name, such as Auto Record.
Once the Auto Record Work Flow Group is created, expand the Auto Record Work Flow Group, and expand CAD Agent.
Select Voice Contact Work Flows.
A window displays to the right.
You are prompted for the name.
Enter the name of your choice, such as Auto Record, and click OK.
The Edit Voice Contact Classification screen appears with the default inbound calls in the drop-down menu.
Select the Edit radio button for the Data Field Conditions, select Is Not Empty, and click OK.
Accept the Any Condition is True default option for the Execute Actions When section, and click OK.
The Voice Contact Work Flow - Auto Record window appears.
For Events, select Answered, and select New under Rules (of current Event).
You are prompted for the name of the rule.
Enter a name of your choice, such as Start recording on Answer, and click OK.
Click Add under the Actions (of current Rule) section.
A box displays.
Click the Utility Action tab, and click New.
You are prompted for the Action Name.
Enter a name of your choice, such as Start recording on Answer.
Choose Record from the Action Type drop-down menu, choose Start from the Action drop-down window, and click OK.
Click the Add Action button.
You can now see your Answered Event, the Start Recording on Answer Rules and the Start Recording on Answer Actions.
Select the top Edit radio button under the Current Rule Conditions, select Is Not Empty, and click OK.
The Enable Rule check box is automatically checked.
Click Apply, and the rule and event are saved.
You are returned to the screen for step 7.
Select the Voice Contact Work Flow that you created in step 7, and click Edit to add the stop recording event and corresponding rules.
Repeat steps 8-20 in order to add the stop recording rule. Keep in mind that for step 12, you perform the Dropped event configuration instead of Answered event.
Finally, add the agent you want to monitor to the work flow group through Cisco Desktop Admin.
There is currently no verification procedure available for this configuration.
There is currently no specific troubleshooting information available for this configuration.
- Configure Automatic Recording for CAD agents
- UCCX 7.0(1) - Agents Initiate Call Recordings directly from CAD
- Voice Technology Support
- Voice and Unified Communications Product Support
- Troubleshooting Cisco IP Telephony
- Technical Support & Documentation - Cisco Systems
|Updated: Mar 22, 2010||Document ID: 111873|