This document discusses the processes used by the Logger Database Server.
Readers of this document should have knowledge of these topics:
Cisco Intelligent Contact Management (ICM)
The information in this document is based on all versions of Cisco ICM.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
A Microsoft SQL Server database logs all the data captured from:
Automatic Call Distributor (ACD)/Voice Response Unit (VRU) systems.
The 800 number networks.
The routing decisions made by the CallRouter.
The Logger is open in design, and is intended to be part of the overall Information Services (IS) network of the customer. This open design allows any authorized user to access the database.
The Central Database contains these types of information:
Full configuration information for the enterprise
All routing scripts – current and, if the customer chooses to save them, past versions
Call detail data
Five-minute summary data
Half-hour historical data
This table describes the key Logger processes:
|Csfs||CSFS||The Customer Service Forwarding Service (CSFS) handles communications with various services like Simple Network Management Protocol (SNMP), Remote Access Server (RAS), and Serial Event Feed.|
|Dtp||DTP||The Customer Support Data Transfer Process (DTP) (Dials The Phone) transfers events from the Logger to the Cisco Internet Communication Software Group (ICSG) Technical Assistance Center (TAC).|
|Lgr||LOGGER||The Database Logger is a process that stores historical data and information about the entire system in the central database.|
|Nm||NODEMAN||The Node Manager is a process that manages, restarts, and initializes processes on each ICM node.|
|Nmm||NMM||The Node Manager Manager is a process that manages, restarts, and initializes the Node Manager process on each ICM node.|
|Rcv||RECOVERY||The Central Database Recovery recovers central database historical data.|
|Mds||MDSPROC||The Message Delivery Service is a process that provides reliable message delivery between the Cisco ICM processes.|
|SNMP||SNMP||The SNMP Extension Agent receives an event feed from the CSFS process and communications with the Windows NT SNMP Agent to generate SNMP traps when certain events with alarms occur.|
|Tysl||TESTSYNC||This is a Diagnostic Tool.|
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.