Table Of Contents
Managing VLANs
Viewing VLANs
Adding VLANs
Editing VLANs
Deleting VLANs
Managing VLANs
The following topics are described in this section:
•
Viewing VLANs
• Adding VLANs
• Editing VLANs
• Deleting VLANs
The SSL software supports only the normal-range VLANs (2 through 1005). Limit the SSL Services Module configuration to the normal-range VLANs.
VLAN IDs must be the same for the switch and the module.
Note When you create VLANs using CVDM-SSLM, you must ensure that the corresponding VLANs exist on the switch and configured to permit the SSL VLANs.
Viewing VLANs
To view VLANs configured on the module:
Step 1 Click Setup in the taskbar.
Step 2 Click VLANs in the left-most pane. The VLAN page appears.
Step 3 Click VLANs group folder in the object selector.
The following fields appear:
Field
|
Description
|
VLAN ID
|
Identification number for the VLAN.
|
IP Address / Subnet Mask
|
IP address or subnet mask of the VLAN.
|
Subnet
|
Subnet of the VLAN
|
Gateway
|
The gateway IP address of the VLAN
|
Route
|
Destination
|
Destination IP address.
|
Next Hop
|
Next Hop IP address.
|
Click Add... to add a new VLAN.
To edit the VLAN settings, select a VLAN from the table, then click Edit....
To delete a VLAN, select a VLAN from the table, then click Delete.
Related Topics
• Adding VLANs
• Editing VLANs
• Deleting VLANs
Adding VLANs
Step 1 Click Setup in the taskbar.
Step 2 Click VLANs in the left-most pane. The VLAN page appears.
Step 3 Click VLANs group folder in the object Selector.
Step 4 Click Add...
The following fields appear:
Field
|
Description
|
VLAN ID (2 - 1005)
|
Enter the VLAN ID. The value should be between 2 and 1005.
|
IP Address
|
Enter the VLAN IP address.
|
Net Mask
|
Select the mask for the IP address.
Values are:
•255.0.0.0
•255.255.0.0
•255.255.255.0
|
Gateway
|
Enter the IP address of the gateway.
|
Route
|
Destination IP Address
|
Enter the IP address of the destination.
|
Destination Netmask
|
Enter the mask for the destination.
|
Step 5 Click OK to add the new VLAN.
Related Topics
• Viewing VLANs
• Editing VLANs
• Deleting VLANs
Editing VLANs
Step 1 Click Setup in the taskbar.
Step 2 Click VLANs in the left-most pane. The VLAN page appears.
Step 3 Click VLANs group folder in the object selector.
Step 4 Click Edit...
The following fields appear:
Field
|
Description
|
VLAN ID
|
The ID of the VLAN you have selected.
|
IP Address
|
Modify the IP address of the VLAN.
|
Mask
|
Modify the mask to be used for the VLAN.
|
Gateway
|
Modify the IP address of the gateway.
|
Route
|
Destination IP Address
|
Enter the destination IP address.
|
Destination Netmask
|
Enter the destination netmask.
|
Step 5 Click OK to apply the changes.
Related Topics
• Viewing VLANs
• Adding VLANs
• Deleting VLANs
Deleting VLANs
Step 1 Click Setup in the taskbar.
Step 2 Click VLANs in the left-most pane. The VLAN page appears.
Step 3 Click VLANs group folder in the object selector.
Step 4 Click Delete.
Related Topics
• Viewing VLANs
• Adding VLANs
• Editing VLANs
