Devices Tab Reference

Deployment Group list box

Contains the deployment groups defined on the system. Choose the deployment group that contains the devices you want to display. When you select a deployment group, only devices that have network elements that are assigned to policy groups in the deployment group will be displayed.

Sys Name column

Displays the system name, which is obtained from the SysName MIB variable. Click a name to display that device's properties.

Primary Device Name column

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

Model column

Displays the device model. See the section Adding Devices to the Device Inventory for information about unsupported models.

OS Version column

Displays the device operating system (OS) version.

Mapped OS Version column

Displays the OS version that QPM has mapped to the device. See the section Adding Devices to the Device Inventory for information about mapped OS versions.

Status column

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. You cannot deploy to devices with these statuses:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. These are the common causes:
  
  
• • The device Telnet password entered in QPM is incorrect. Correct the Telnet password in QPM.
    
    
  • SSH is enabled but SSH login failed because SSH is not configured correctly on the device. Fix the SSH configuration on the device.
    
    
  • The login to the device failed.
    
    
  • There is no Telnet connection to the device.
    
    

Policy Group column

Displays the policy group in the current deployment group to which the device is assigned.

The current deployment group is the deployment group selected in the Deployment Group list box above the table. If All is selected in the list box, the current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Device Folder column

Displays the device folder that contains the device.

Interfaces column

Click the icon for a device to display the Interfaces page for that device.

Edit button

Click to edit the device properties of the selected devices. The Device Properties Page appears.

Rediscover button

Click to rediscover the selected devices. The Discovery Status Page appears.

Set Policy Group button

Click to assign the selected devices to a policy group or remove them from policy groups. The Policy Group Assignment Dialog Box opens.

Set Device Folder button

Click to assign the selected devices to a device folder or remove them from device folders. The Device Folder Setting Dialog Box opens.

Delete button

Click to delete the selected devices from the inventory. A confirmation prompt appears.

When deletion is done, the device table refreshes.

Deployment Group list box

Lists deployment groups defined on the system. Select the deployment group that contains the policy group you want to select.

Remove Policy Group Assignments radio button

Click to remove the selected devices from a policy group.

Set Policy Group radio button

Click to assign the selected devices to a policy group.

Policy Group Name column

Lists policy groups that match the constraints of all of the selected devices. Select the policy group to assign by selecting its check box.

The message No suitable Policy Groups Found appears if there are no policy groups to which all of the selected devices can be assigned.

Description column

Displays a description of the policy group.

OK button

Click to save changes and close the dialog box.

Close button

Click to close the dialog box without saving changes.

Remove from Device Folder radio button

Click to remove all of the selected devices from any device folder.

Set Device Folder radio button

Click to assign the selected devices to the selected device folder.

Device Folder Name column

Displays the names of the device folders on the system. Select the radio button next to a device folder name to select it.

Device Folder Description column

Displays a description of the device folder.

OK button

Click to save changes and close the dialog box.

Close button

Click to close the dialog box without saving changes.

Sys Name field

Displays the system name, which is obtained from the SysName MIB variable. Click a name to display that device's properties.

Primary Device Name field

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

IP/DNS field

Displays the device IP address or DNS name.

Although this field is a field, you cannot change its data. Changes will not be saved when you click the Save button.

You cannot use device DNS names that contain the backslash (\) character.

Status field

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. Devices with these statuses are not usable in QPM:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. The most common cause is that the device Telnet password entered in QPM is incorrect.
  
  

Description field

Displays the device description. Edit it to change to description.

Role list box

Displays the device role, if one is assigned. Select a role from the list to assign it to the device.

OS field

Displays the device operating system (OS) version.

Mapped OS list box

Displays the OS version that QPM has mapped to the device. See the section Adding Devices to the Device Inventory for information about mapped OS versions.

Note   If you change the mapped OS version, QoS that is currently configured on the device might not be supported in the new OS version. See Assignment Conflicts Reports Page, for more information.

Model field

Displays the device model.

Last Discovery field

Displays the date the device was last discovered.

Device Group field

Displays the device group to which the device belongs.

Device Folder list box

Displays the device group to which the device is assigned. Select a device folder from the list to assign it to the device.

All Interfaces field

Displays the number of interfaces on the device that are in the QPM inventory.

Ignored Interfaces field

Displays the number of ignored interfaces on the device. Click the number to remove the ignore setting from one or more interfaces. the Ignored Interfaces List Dialog Box opens.

Enable Access Control Policies check box

Select to enable creation and modification of access control policies.

Enable Write Memory check box

Select to enable writing device configuration changes to the device's memory.

Enable NBAR Port Mapping check box

Select to enable NBAR port mapping.

Reset to default button

Click to reset the device settings to the device group defaults.

Read Community String field

Contains the device read community string that QPM uses to access the device. You can change it by entering a new value in the field.

Blind login check box

Select to enable blind login to the device, in which QPM sends login information to the device (including access parameters) without waiting for or evaluating return prompts from the device.

You can use any characters for the blind login, except $, ^, and \.

Use SSH connection check box

Select to enable support for SSH when connecting to the device.

TACACS User field

Contains the TACACS username that QPM uses to access the device. You can change it by entering a new value in the field.

TACACS Password field

Contains the TACACS password that QPM uses to access the device. You can change it by entering a new value in the field.

TACACS Enable Password field

Contains the TACACS enable password that QPM uses to access the device. You can change it by entering a new value in the field.

User Name field

Contains the username that QPM uses to access the device. You can change it by entering a new value in the field.

Enable Password field

Contains the enable or enable secret password that QPM uses to access the device. You can change it by entering a new value in the field.

Telnet Password field

Contains the Telnet password that QPM uses to access the device. You can change it by entering a new value in the field.

Local Password field

Contains the local password that QPM uses to access the device. You can change it by entering a new value in the field.

Reset to Default button field

Click to reset the values in the Access Parameters area to the device group default values.

Range 1 From list box

Enter the starting ACL number for range 1.

Range 1 To list box

Enter the end ACL number for range 1.

Range 2 From list box

Enter the starting ACL number for range 2.

Range 2 To list box

Enter the end ACL number for range 2.

Range 3 From list box

Enter the starting ACL number for range 2.

Range 3 To list box

Enter the end ACL number for range 2.

Interface Name column

Displays the interface name.

Sys Name column

Displays the system name of the device to which to the interface connects.

The system name is obtained from the SysName MIB variable.

Primary Device Name column

Displays the primary device name of the device to which to the interface connects.

Model column

Displays the Model of the device to which to the interface connects.

OS Version column

Displays the OS version of the device to which to the interface connects.

Save

Click to save any changes you have made in the page.

Rediscover

Click to rediscover the device. The Discovery Status Page appears.

Show Run

Click to display the device's running configuration. The Display show run Page appears.

Telnet

Click to Telnet to the device using your client system's default Telnet application. Does not work if your client system does not have a Telnet application installed.

Export

Click to export the device's information to a virtual device file, which you can use to import the device into the inventory as a virtual device. The browser's file saving process starts.

Check box column

Click a check box to select its row.

Name column

Displays the interface name.

Type column

Displays the interface type.

Description column

Displays the interface description.

Rate column

Displays the interface rate.

Card Type column

Displays the interface card type.

Cancel Ignore button

Click to cancel the ignore on the interface, which causes it to appear in the QPM UI again.

Close button

Click to close dialog box.

Name column

Displays the interface name.

Type column

Displays the interface type.

Description column

Displays the interface description.

Rate column

Displays the interface rate in kilobits per second.

Card Type column

Displays the interface card type.

Policy Group column

Displays the policy group in the current deployment group to which the interface is assigned. The current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Connected to Device column

Displays the IP address of the device to which the interface is connected.

Mark as Ignore button

Click to mark the selected interfaces as ignored, which causes them not to appear in the QPM UI. Any DLCIs and VCs configured on ignored interfaces are also ignored.

A confirmation dialog box opens. Click Yes to confirm the action.

Set Policy Group button

Click to set the policy group to which the interface is assigned. The Policy Group Assignment Dialog Box opens.

Name field

Displays the interface name.

Index field

Displays the interface index.

Type field

Displays the interface type.

Card Type field

Displays the interface card type.

Rate field

Displays the interface rate.

Description field

Displays the interface description.

IP field

Displays the interface IP address.

Subnet Mask field

Displays the interface IP address subnet mask.

Is Ignored check box

Indicated whether the interface is marked as ignored, which prevents it from appearing in the QPM UI. Select the check box to ignore the interface, or clear it to remove the ignore setting.

Connected to Device field

Displays the name of the device to which the interface is connected.

IP field

Displays the IP address of the device to which the interface is connected

Model field

Displays the model of the device to which the interface is connected.

Check box column

Click a check box to select its row.

VC Name column

Displays the VC name.

Policy Group column

Displays the policy group in the current deployment group to which the VC is assigned. The current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Set Policy Group button

Click to assign the selected VCs to policy groups. The Policy Group Assignment Dialog Box opens.

Check box column

Click a check box to select its row.

DLCI Name column

Displays the DLCI name.

Policy Group column

Displays the policy group in the current deployment group to which the DLCI is assigned. The current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Set Policy Group button

Click to assign the selected DLCIs to policy groups. The Policy Group Assignment Dialog Box opens.

Pair Name column

Displays the source-destination pair name.

Source Interface column

Displays the source interface name.

Target Interface column

Displays the target (destination) interface name.

Policy Group column

Displays the policy group in the current deployment group to which the source-destination pair is assigned. The current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Create button

Click to create a new source-destination pair. The Source-Dest Pair Properties Page appears.

Edit button

Click to edit the selected source-destination pair. The Source-Dest Pair Properties Page appears.

Delete button

Click to delete the selected source-destination pair. The Source-Dest Pair Properties Page appears.

Set Policy Group button

Click to set the policy group assignment of the selected source-destination pair. The Policy Group Assignment dialog box Policy Group Assignment Dialog Box opens.

Pair Name field

Enter the source-destination pair name.

Source Interface list box

Select the source interface.

Target Interface list box

Select the target interface.

Save button

Click to save changes.

Name column

Displays the VLAN name.

Index column

Displays the VLAN index.

Type column

Displays the VLAN type.

Status column

Displays the VLAN status. The possible statuses are:

• Operational—The VLAN is operational.
  
  
• Suspended—The VLAN was suspended by the administrator.
  
  
• mtuTooBigForDevice—The device cannot participate in the VLAN because the VLAN MTU is larger than the device can support.
  
  
• mtuTooBigForTrunk—The VLAN MTU is supported by the device, but it is too large for one or more of the device trunk ports.
  
  

MTU column

Displays the VLAN MTU.

Policy Group column

Displays the policy group in the current deployment group to which the VLAN is assigned. The current deployment group is displayed in the Deployment Group field in the context area at the top of the page.

Interfaces column

Click the Interfaces icon in this column to view the interfaces that are assigned to the VLAN.

Set Policy Group button

Click to assign the selected VLANs to a policy group. The Policy Group Assignment Dialog Box opens.

Name column

Displays the VLAN name.

Index column

Displays the VLAN index.

IP column

Displays the VLAN IP address.

Subnet Mask column

Displays the IP address subnet mask.

MTU column

Displays the VLAN MTU.

Rate column

Displays the VLAN rate.

Type column

Displays the VLAN type.

Interface Name column

Displays the names of the interfaces that are associated to the VLAN.

Is Trunk column

Indicates whether the interface is configured as a trunk.

Is Auxiliary column

Indicates whether the interface is configured as an auxiliary.

Manual radio button

Select to import one device manually. The content of the page is described in Manual Import Option.

Import from CSV file radio button

Select to import devices from a CSV file created by RME. The content of the page is described in Import from CSV File Option.

Import from RME radio button

Select to import devices directly from RME. The content of the page is described in Import from RME Option.

Import Virtual Devices from file radio button

Select to import a virtual device from a virtual device file created by QPM. The content of the page is described in Import Virtual Devices from File Option.

Import from Qpm 2.x radio button

Select to import devices from QPM version 2.x. The content of the page is described in Import from Qpm 2.x Option.

Next button

Click to proceed to the next step.

IP Address / DNS field

Enter the IP address or the DNS name of the device to import.

You cannot use device DNS names that contain the backslash (\) character.

Read Community String field

Enter the device read community string.

Login Mode radio buttons

Select the type of username, password, and enable password you are entering in the page—either Telnet, TACACS, or Local authentication.

Note   This selection affects only how the device credentials you enter are stored in QPM. QPM attempts to discover the device by trying all of the authentication methods.

User Name field

Enter the username to use for connecting to the device.

Password field

Enter the password to use for connecting to the device.

Enable Password field

Enter the enable or enable secret password to use for connecting to the device.

File field

Enter the path on the client system to the CSV file created by RME from which to import devices.

Browse button

Click to browse to the CSV file instead of typing the path in the File field.

Do not re-import devices that were previously imported, but not added to the QPM inventory. check box

Select to import only those devices that have not been previously imported. Devices that have been imported but not added to the inventory are also not imported if you select this option.

Host Location field

Enter the DNS name or IP address of the RME server from which to import.

Port field

Enter the IP port number of the RME server.

User Name field

Enter the RME username to use to log into the RME server.

Password field

Enter the password for the RME username.

Import only new RME devices check box

Click to import only those devices that have not been previously imported. Devices that have been imported but not added to the inventory are also not imported if you select this option.

File field

Enter the path on the client system to the virtual device file created by QPM from which to import.

Browse button

Click to browse to the virtual device file instead of typing the path in the File field.

File field

Enter the path on the client system to the import file created by QPM 2.x from which to import.

Browse button

Click to browse to the virtual device file instead of typing the path in the File field.

No User Authorization column

Displays the number of imported devices that you do not have sufficient permissions to add to the QPM inventory.

This field does not appear if you are importing devices manually or are importing virtual devices.

Exists in QPM column

Displays the number of devices that are already in the QPM inventory, and therefore cannot be imported again.

This field does not appear if you are importing devices manually or are importing virtual devices.

Previously Ignored column

Displays the number of devices that were previously imported but were not added to the QPM inventory. There devices are not available to add to the inventory if you selected the Import only new RME devices check box in the previous step.

This field does not appear if you are importing devices manually or are importing virtual devices.

Total Devices column

Displays the total number of devices that were imported.

This field does not appear if you are importing devices manually or are importing virtual devices.

Check box column

Select a check box to select its row.

Primary Device Name column

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

Model column

Displays the device model.

Status column

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. Devices with these statuses are not usable in QPM:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. These are the common causes:
  
  
• • The device Telnet password entered in QPM is incorrect. Correct the Telnet password in QPM.
    
    
  • SSH is enabled but SSH login failed because SSH is not configured correctly on the device. Fix the SSH configuration on the device.
    
    
  • The login to the device failed.
    
    
  • There is no Telnet connection to the device.
    
    

Device Group column

Displays the device group to which the device is assigned.

Back button

Click to return to the previous step.

Finish button

Click to finish the wizard, importing the selected devices.

Cancel button

Click to cancel the wizard.

Check box column

Select a check box to select its row.

Job Type column

Displays the job type.

Start column

Displays the job start time.

End column

Displays the job end time.

In Progress column

Displays the number of devices that are in the process of being discovered.

Click the number to view details about discovery of these devices. The Discovery Status Devices List Dialog Box opens.

Completed column

Displays the number of devices that have been discovered.

Click the number to view details about discovery of these devices. The Discovery Status Devices List Dialog Box opens.

Total column

Displays the number of devices that are in the process of being discovered or have been discovered.

Click the number to view details about discovery of these devices. The Discovery Status Devices List Dialog Box opens.

User column

Displays the user who started the job.

Delete button

Click to delete the selected jobs. This does not stop the discovery job.

Refresh Rate list box

Select a page refresh rate from the list. The refresh rate determines how often the page refreshes with updated information.

Primary Device Name column

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

Model column

Displays the device model.

Status column

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. Devices with these statuses are not usable in QPM:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. These are the common causes:
  
  
• • The device Telnet password entered in QPM is incorrect. Correct the Telnet password in QPM.
    
    
  • SSH is enabled but SSH login failed because SSH is not configured correctly on the device. Fix the SSH configuration on the device.
    
    
  • The login to the device failed.
    
    
  • There is no Telnet connection to the device.
    
    

OS column

Displays the device operating system (OS) version.

Mapped OS column

Displays the OS version that QPM has mapped to the device. See Adding Devices to the Device Inventory for information about mapped OS versions.

Close button

Click to close the dialog box.

Radio button column

Select a radio button to select its row.

Name column

Displays the device group name.

Description column

Displays the device group description.

Active Device Group column

Indicates whether the device group is the active device group. The active device group has a check mark in this column.

Device Folders column

Click the Device Folders icon in the column to view the device folders that exist within the device group. The Device Folders page appears.

Edit button

Click to edit the properties of the selected device group. The Device Group Properties Page appears.

Set Active button

Click to set the selected device group as the active device group.

This setting takes effect throughout the QPM UI. Only the devices, deployment groups, and policy groups in the active device group appear in the UI. To work with items from another device group in the QPM UI, set that device group to be the active device group.

Delete button

Click to delete the selected device group.

Any deployment groups and policy groups contained in the device group are also deleted. This feature is useful because device groups are not automatically deleted from QPM when you delete them in ACS, even when you synchronize device group information with ACS. This gives you the opportunity to edit your QPM deployment groups and policy groups before manually deleting the device group.

Device Group Name field

Displays the device group name.

Description field

Displays the device group description. Edit the text in this field to change the description.

Enable Access Control Policies check box

Select to enable creation and modification of access control policies.

Enable Write Memory check box

Select to enable writing device configuration changes to the device's memory.

Enable NBAR Port Mapping check box

Select to enable NBAR port mapping.

Read Community String field

Contains the device read community string that QPM uses to access the device. You can change it by entering a new value in the field.

Blind login check box

Select to enable blind login to the device, in which QPM sends login information to the device (including access parameters) without waiting for or evaluating return prompts from the device.

You can use any characters for the blind login, except $, ^, and \.

Use SSH connection check box

Select to enable support for SSH when connecting to the device.

TACACS User field

Contains the TACACS username that QPM uses to access the device. You can change it by entering a new value in the field.

TACACS Password field

Contains the TACACS password that QPM uses to access the device. You can change it by entering a new value in the field.

TACACS Enable Password field

Contains the TACACS enable password that QPM uses to access the device. You can change it by entering a new value in the field.

User Name field

Contains the username that QPM uses to access the device. You can change it by entering a new value in the field.

Enable Password field

Contains the enable or enable secret password that QPM uses to access the device. You can change it by entering a new value in the field.

Telnet Password field

Contains the Telnet password that QPM uses to access the device. You can change it by entering a new value in the field.

Local Password field

Contains the local password that QPM uses to access the device. You can change it by entering a new value in the field.

Range 1 From list box

Enter the starting ACL number for range 1.

Range 1 To list box

Enter the end ACL number for range 1.

Range 2 From list box

Enter the starting ACL number for range 2.

Range 2 To list box

Enter the end ACL number for range 2.

Range 3 From list box

Enter the starting ACL number for range 2.

Range 3 To list box

Enter the end ACL number for range 2.

Save button

Click to save any changes you have made in the page.

Check box column

Select a check box to select its row.

Name column

Displays the device folder name. Click a device folder name to view or edit the device folder properties.

Description column

Displays the device folder description.

Devices column

Click the Devices icon in the Devices column to view the devices in a device folder. The Device Table page appears.

Create button

Click to create a new device folder. The Device Folder Properties Page appears.

Edit button

Click to edit the selected device folder. The Device Folder Properties Page appears.

Delete button

Click to delete the selected device folder.

Device Folder Name field

Displays the device folder name. Change the name by editing this field.

Description field

Displays the device folder description. Change the description by editing this field.

Save button

Click to save any changes you have made in the page.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for devices that have serial interfaces, select Interface.

Attribute column

Select an attribute of the source selected in the Source column.

For example, to search for devices that have serial interfaces, select Type.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for devices that have serial interfaces, select Contains.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for devices by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for devices that have serial interfaces, enter s, because all serial interface names will contain that character.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the Devices Search Result Page.

Reset button

Click to clear all search criteria.

Check box column

Select a check box to select its row.

Sys Name column

Displays the system name, which is obtained from the SysName MIB variable. Click a name to display that device's properties.

Primary Device Name column

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

Model column

Displays the device model. See the section Adding Devices to the Device Inventory for information about unsupported models.

OS Version column

Displays the device operating system (OS) version.

Mapped OS Version column

Displays the OS version that QPM has mapped to the device. See the section Adding Devices to the Device Inventory for information about mapped OS versions.

Status column

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. You cannot deploy to devices with these statuses:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. These are the common causes:
  
  
• • The device Telnet password entered in QPM is incorrect. Correct the Telnet password in QPM.
    
    
  • SSH is enabled but SSH login failed because SSH is not configured correctly on the device. Fix the SSH configuration on the device.
    
    
  • The login to the device failed.
    
    
  • There is no Telnet connection to the device.
    
    

Policy Group column

Displays the policy group to which the device is assigned in the active deployment group.

Device Folder column

Displays the device folder that contains the device.

Interfaces column

Click the icon for a device to display the Interfaces page for that device.

Edit button

Click to edit the device properties of the selected device. The Device Properties Page appears.

Rediscover button

Click to rediscover the selected devices. The Discovery Status Page appears.

Set Device Folder button

Click to assign the selected devices to a device folder or remove them from device folders. The Device Folder Setting Dialog Box appears.

Delete button

Click to delete the selected devices from the inventory. A confirmation prompt appears.

When deletion is done, the device table refreshes. All of the deleted device's policy group assignments are also deleted.

Set Policy Group button

Click to assign the selected devices to a policy group or remove them from policy groups. The Policy Group Assignment Dialog Box opens.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for interfaces that are members of a VLAN whose name contains the string "eng", select VLAN.

Attribute column

Select an attribute of the source selected in the Source list box.

For example, to search for interfaces that are members of a VLAN whose name contains the string "eng", select Name.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for interfaces that are members of a VLAN whose name contains the string "eng", select Contains.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for network elements by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for interfaces that are members of a VLAN whose name contains the string "eng", enter eng.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group list column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the Interfaces Search Result Page.

Reset button

Click to clear all search criteria.

Check box column

Select a check box to select its row.

Name column

Displays the interface name.

Sys Name column

Displays the sys name of the device on which the interface is located.

Type column

Displays the interface type.

Description column

Displays the interface description.

Rate column

Displays the interface rate in kilobits per second.

Card Type column

Displays the interface card type.

Policy Group column

Displays the policy group in the current deployment group to which the interface is assigned.

Connected to Device column

Displays the IP address of the device to which the interface is connected.

Mark as Ignore button

Click to mark the selected interfaces as ignored, which causes them not to appear in the QPM UI. Ignored interfaces are not configured by QPM. Any DLCIs and VCs configured on ignored interfaces are also ignored.

A confirmation dialog box opens. Click Yes to confirm the action.

For information about hiding and displaying ignored interfaces, see Hiding and Displaying Interfaces.

Set Policy Group button

Click to set the policy group to which the interface is assigned. The Policy Group Assignment Dialog Box appears.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for VLANs that contain Ethernet interfaces, select Interface.

Attribute column

Select an attribute of the source selected in the Source column.

For example, to search for VLANs that contain Ethernet interfaces, select Type.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for VLANs that contain Ethernet interfaces, select Contains.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for network elements by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for VLANs that contain Ethernet interfaces, enter Ethernet.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the VLANs Search Result Page.

Reset button

Click to clear all search criteria.

Check box column

Select a check box to select its row.

Name column

Displays the VLAN name.

Index column

Displays the VLAN index.

Type column

Displays the VLAN type.

Status column

Displays the VLAN status. The possible statuses are:

• Operational—The VLAN is operational.
  
  
• Suspended—The VLAN was suspended by the administrator.
  
  
• mtuTooBigForDevice—The device cannot participate in the VLAN because the VLAN MTU is larger than the device can support.
  
  
• mtuTooBigForTrunk—The VLAN MTU is supported by the device, but it is too large for one or more of the device trunk ports.
  
  

MTU column

Displays the VLAN MTU.

Policy Group column

Displays the policy group in the current deployment group to which the VLAN is assigned.

Interfaces column

Click the Interfaces icon in this column to view the interfaces that are assigned to the VLAN.

Set Policy Group button

Click to assign the selected VLANs to a policy group. The Policy Group Assignment Dialog Box opens.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for VCs whose name contains the string "west", select VC.

Attribute column

Select an attribute of the source selected in the Source column.

For example, to search for VCs whose name contains the string "west", select Name.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for VCs whose name contains the string "west", select Contains.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for network elements by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for VCs whose name contains the string "west", enter west.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the VCs Search Result Page.

Reset button

Click to clear all search criteria.

Check box column

Click a check box to select its row.

Name column

Displays the VC name.

Interface Name column

Displays the name of the interface on which the VC exists.

Sys Name column

Displays the sys name of the device on which the VC exists.

Policy Group column

Displays the policy group in the current deployment group to which the VC is assigned.

Set Policy Group button

Click to assign the selected VCs to policy groups. The Policy Group Assignment Dialog Box opens.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for all DLCIs that are on devices that are members of a device folder named "West Coast", select Device Folder.

Attribute column

Select an attribute of the source selected in the Source column.

For example, to search for all DLCIs that are on devices that are members of a device folder named "West Coast", select Name.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for all DLCIs that are on devices that are members of a device folder named "West Coast", select Equals.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for network elements by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for all DLCIs that are on devices that are members of a device folder named "West Coast", enter West Coast.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the DLCIs Search Result Page.

Reset button

Click to clear all search criteria.

Check box column

Select a check box to select its row.

Name column

Displays the DLCI name.

Interface Name column

Displays the interface name.

Sys Name column

Displays the sys name of the device.

Policy Group column

Displays the policy group to which the DLCI is assigned in the current deployment group.

Set Policy Group button

Click to set the policy group to which the selected DLCI is assigned. The Policy Group Assignment Dialog Box opens.

Contains or belongs to column

Select a source for the search criteria statement. The list entries are qualities of the network element.

For example, to search for all source-destination pairs that are on Cisco 8400 series devices, select Device.

Attribute column

Select an attribute of the source selected in the Source column.

For example, to search for all source-destination pairs that are on Cisco 8400 series devices, select Model.

Operator column

Select an operator that describes the relationship between the attribute and the value.

For example, to search for all source-destination pairs that are on Cisco 8400 series devices, select Contains.

Value column

Enter values on which to search. Separate multiple values with commas. If you enter multiple values, they are connected by logical OR, meaning that the search will find network elements that match any of the values.

QPM will search for network elements by evaluating the relationship between the values you enter and the source attribute you select. Network elements on which the relationship between the values and the source attribute are related as specified by the operator you select will appear in the search results.

For example, to search for all source-destination pairs that are on Cisco 8400 series devices, enter 8400.

Operator column

Select an operator that describes the relationship of the network element to the assignment criteria. Assigned means that a network element must be assigned to the selected policy group(s). Not Assigned means that a network element must not be assigned to the selected policy group(s).

Deployment Group column

Select the deployment group for the search criteria.

The selection in this list determines which policy groups will appear in the Policy Group list. Select Any to select all deployment groups on the system, which automatically selects Any in the Policy Group list.

Policy Group column

Select the policy group for the search criteria.

Which policy groups are available in this list depends on your selection in the Deployment Group list. Select Any to select all policy groups in the selected deployment group.

Match All radio button

Select to connect all search criteria statements by logical AND, meaning that the search will find network elements that match all of the criteria statements.

Match Any radio button

Select to connect all search criteria statements by logical OR, meaning that the search will find network elements that match any of the criteria statements.

Refresh Summary button

Click to see the search criteria expressed as a sentence in the Summary field.

Summary field

Displays the search criteria expressed as a sentence.

Search Now button

Click to run the currently configured search. The results appear in the Source-Dest Pairs Search Result Page.

Reset button

Click to clear all search criteria.

Pair Name column

Displays the source-destination pair name.

Source Interface column

Displays the source interface name.

Target Interface column

Displays the target (destination) interface name.

Policy Group column

Displays the policy group in the current deployment group to which the source-destination pair is assigned.

Edit button

Click to edit the selected source-destination pair.The Source-Dest Pair Properties Page appears.

Delete button

Click to delete the selected source-destination pair. The Source-Dest Pair Properties Page appears.

Set Policy Group button

Click to set the policy group assignment of the selected source-destination pair. The Policy Group Assignment dialog box Policy Group Assignment Dialog Box opens.

Host Location field

Enter the RME server DNS name or IP address.

Port field

Enter the RME server port number.

User Name field

Enter the username with which to log into the RME server.

Password field

Enter the password for the RME username.

Device group list box

Lists the device groups on the system. Select a device group from the list to filter the table to include only devices in that device group.

Check box column

Select a check box to select its row.

Sys Name column

Displays the system name, which is obtained from the SysName MIB variable. Click a name to display that device's properties.

Primary Device Name column

Displays the device IP address or DNS name entered to identify the device when it was added to the inventory.

Model column

Displays the device model. See the section Adding Devices to the Device Inventory for information about unsupported models.

OS column

Displays the device operating system (OS) version.

Mapped OS column

Displays the OS version that QPM has mapped to the device. See the section Adding Devices to the Device Inventory for information about mapped OS versions.

Status column

Displays the device status.

The following statuses indicate that the device is working properly:

• OK
  
  
• Virtual—The device is a virtual device.
  
  

The following statuses indicate a problem with the device. You cannot deploy to devices with these statuses:

• Unreachable—The QPM server cannot establish basic network connectivity to the device.
  
  
• SNMP Error—The device has an SNMP error that is preventing QPM from gathering the data it needs to work with the device. These are the common causes:
  
  
• • The device public community string entered in QPM is incorrect.
    
    
  • QPM can't read all of the necessary SNMP information from the device, possibly because there are corrupted or missing MIBs.
    
    
  • The device does not have a functioning SNMP engine.
    
    
  • The SNMP request timed out, typically because the device or network was too congested to respond before the timeout limit. The possible resolutions are to increase the SNMP timeout value and to increase the number of SNMP retries.
    
    
• Telnet Error—QPM cannot connect to the device using Telnet. These are the common causes:
  
  
• • The device Telnet password entered in QPM is incorrect. Correct the Telnet password in QPM.
    
    
  • SSH is enabled but SSH login failed because SSH is not configured correctly on the device. Fix the SSH configuration on the device.
    
    
  • The login to the device failed.
    
    
  • There is no Telnet connection to the device.
    
    

Update Passwords button

Click to update the passwords of the selected devices from RME.

Server mode field

Displays which server type is being used to administer user permissions and device groups, either ACS or CiscoWorks.

Privilege Summary table

Displays the permissions you have to the QPM device groups. The possible permissions you can have are View, Modify, and Deploy. A check mark indicates that you have that permission, while a dash indicates that you do not.

Sync button

Click to synchronize the QPM inventory device group configuration with the ACS or CFM device group configuration.

File field

Enter the path on the client system to the file containing voice roles to import.

Browse button

Click to browse to the file instead of typing it in the File field.

Import button

Click to import voice roles.