Document ID: 12543
Updated: Sep 08, 2006
Contents
Introduction
This document provides the procedure to change the port used by Cisco IP/TV's Content Manager Java web server.
Before You Begin
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Prerequisites
There are no specific prerequisites for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.
Step-by-Step Instructions
Perform the steps below to change the Cisco IP/TV Content Manager Java web server port.
-
In your web browser, enter the following location:
http://<IP address or hostname of Content Manager>:9090
For example, http://192.0.2.10:9090.
-
Log in with the following user ID and password:
-
User ID: admin
-
Password: admin
-
-
Select Web Service in the Content Manager window, and click the Manage button.
-
Select Network in the Content Manager window. Change the port number field from 80 to the new port number. Click the Restart button.
Note: After you complete these procedures, make sure you change all the IP/TV clients and servers to communicate with the Content Manager on the new port number, instead of port 80.
Related Information
Open a Support Case 
(Requires a Cisco Service Contract.)
Related Cisco Support Community Discussions
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.