Document ID: 116333
Updated: Aug 14, 2013
Contributed by Md Hasan, Cisco TAC Engineer.
This document describes the procedure used in order to analyze the .dmp file that is created when the Cisco Jabber for Windows client crashes.
Cisco recommends that you have knowledge of Cisco Jabber for Windows.
The information in this document is based on Cisco Jabber for Windows Version 9.x and Cisco Unified Personal Communicator (CUPC) Version 8.6.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Perform Crash Dump Analysis for Cisco Jabber for Windows
Use the WinDbg tool in order to perform crash dump analysis. Download the tool from the WinDbg website.
WinDbg Symbols Configuration
- In order to change the symbol path, navigate to File > Symbol File Path > Symbol Path.
- Paste this text into the window:
- Click OK.
Crash Dump Analysis in WinDbg
- Start WinDbg.
- From the File menu, click Open Crash Dump.
- Choose the .dmp (memory.dmp, user.dmp etc.) file, and click Open or drag and drop the .dmp file into WinDbg. This example uses the fulldump file.
- In the command window at the bottom, enter !analyze - v, and press Enter.
- You can see the progress of the analysis on the bottom-left of the screen. In this image, the status is "BUSY."
This command performs an analysis with a fully verbose display of data and is useful in order to obtain more information.
- In order to quit, enter q in the command window, and press Enter.
Here is an example of dump analyzer output:
> !analyze -v
WARNING: Frame IP not in any known module. Following frames may be wrong.
02f4e80c 01457967 7ffdac00 00000104 02f4e86c 0x0
02f4e848 0145637d 00000001 02f4e86c 02f4ed58 wxvault+0x7967
02f4ea88 7c8138b7 7ffdac00 00000000 02f4eac8 wxvault+0x637d
02f4ed1c 009a436f 00b413b4 02f4ed58 00000000
02f4edb8 00000000 00000000 00000000 00000000 CUPCK9+0x5a436f
STACK_COMMAND: ~8s; .ecxr ; kb
Examine the MODULE_NAME and the IMAGE_NAME. The information these provide, like wxvault.dll or CiscoJabber.exe, indicate what application caused the crash. In this case, the crash occurred because of issues with the Cisco Jabber.exe application and not with the user?s machine. A Google search shows that wxvault.dll is related to the DELL Embassy Trust Suite.
Send the Cisco Jabber Problem Report to the Cisco Technical Assistance Center in order to determine if the crash dump is related to a known defect that has a possible workaround.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.