Document ID: 116442
Updated: Aug 20, 2013
Contributed by Nilabja Chattopadhyay, Cisco TAC Engineer.
This document describes how to resolve an error message received when you attempt to log in to the Cisco Unified Attendant Console (CUAC) server Administration Page.
There are no specific requirements for this document.
The information in this document is based on CUAC Version 8.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
When you attempt to access the CUAC Administration Page, you receive this error message:
Complete these steps in order to fix the problem:
- Navigate to All Programs > Microsoft SQL Server 2008 > Configuration Tools > SQL Server Configuration Manager in order to open this window:
- Navigate to SQL Server Network Configuration, and choose Protocols for SQLEXPRESS from the SQL Server Network Configuration drop-down list. Ensure that the TCP/IP and Named Pipes protocols are enabled.
If the previous solution does not correct the problem, the issue might have a different cause. The issue might arise if the CUAC server IP address is changed. If this occurs, ensure that you change the NEW IP address of the CUAC in this Registries location:
HKEY_LOCAL_MACHINE\SOFTWARE\Arc Solutions\Call Connect\Configuration\Defaults
HKEY_LOCAL_MACHINE\SOFTWARE\Arc Solutions\Call Connect\Configuration Database
HKey_Local_Machine\SOFTWARE\Arc Solutions\Call Connect\Defaults
?CTI Server Name
?Last Connected Server
?Presence Server Name
HKEY_LOCAL_MACHINE\SOFTWARE\Arc Solutions\Call Connect\LDAP Synchronize Server\
HKEY_LOCAL_MACHINE\SOFTWARE\Arc Solutions\Call Connect\LDAP Synchronize Server\Defaults
HKEY_LOCAL_MACHINE\SOFTWARE\Arc Solutions\Call Connect\Logging Database
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.