Document ID: 60109
This document explains how to check the Call Detail Recording (CDR) file creation on the Cisco PGW 2200. With the Cisco PGW 2200 Release 9.2(2) and later, the CDR files are created as binary files. In this case, you need to have a Cisco Billing and Measurements Server (BAMS) that collects the binary files through FTP and processes them into a readable Bellcore AMA Format (BAF) file. This document explains how to check the binary files on the Cisco PGW 2200.
Readers of this document should have knowledge of these topics:
The "Configuring Call Detail Record File Output" section of Billing Interfaces
The information in this document is based on the Cisco PGW 2200 Software Releases 9.3 and 9.4.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Use the TAC tool in order to use the CDR information for troubleshooting or validation. This tool also converts the bin format into the txt format by using the /opt/Toolkit/bin/MGC_Toolkit command, as shown in this example.
Note: This tool cannot be used for the creation of daily billing record details. This is because the Protclsh83.bin job (located under the /opt/Toolkit/tcl/TclPro1.4/solaris-sparc/bin/ directory) uses a large percentage of CPU resources. The use of the MGC_Toolkit in a script can drive the Cisco PGW 2200 into congestion. If you want to convert the CDR binary files from the Cisco PGW 2200 for billing customers, use the Cisco BAMS application for this solution. The MGC_TOOLKIT is only part for troubleshooting scenario.
Connected to PGW2200A.cisco.com. Escape character is '^]'. SunOS 5.8 login: mgcusr Password: PGW2200A% cd /opt/Toolkit/bin/ /opt/Toolkit/bin mgcusr@PGW2200A% MGC_Toolkit cdrconvert -input /opt/CiscoMGC/var/spool/cdr_20020904155525_008040.bin Reading the number 1 TLV record in filename:/opt/CiscoMGC/var/spool/cdr_20020904155525_008040.bin message tag ID is :1090 (File_Header) message tag 1090 length is : 93 tag ID is :4000 (Ver) tag 4000 length is :1 Conversion Data Type: BE to IA5 tag 4000 value is : 1 tag ID is :4001 (Create_Tm) tag 4001 length is :4 Conversion Data Type: BE to DT tag 4001 value is : Jan 10 2002 GMT 23:07:26 tag ID is :4002 (Call_Ref_ID) tag 4002 length is :8 Conversion Data Type: BE to HEX tag 4002 value is : 0X0000000000000000 tag ID is :6001 (File_Start_Time) tag 6001 length is :4 Conversion Data Type: BE to DT tag 6001 value is : Jan 10 2002 GMT 23:07:26 !--- Delete the other information, otherwise you will have four pages of information. !--- The tool's MGCC_Toolkit is built to check whether or not the bin files are corrupt.
You can also issue the toolbar.sh cdr command under the /opt/Toolkit/bin directory to receive the information through the GUI:
Note: If you want to access the Cisco PGW 2200 from a UNIX station, issue the xhost + UNIX command (for a description of this user command, issue the man xhost command) on your UNIX station. At the prompt, use the mgcusr username. It has its own environment settings for this application.
Also add the DISPLAY command on the Cisco PGW 2200, as shown in this example:
% telnet pgw2200A Connected to PGW2200A.cisco.com. Escape character is '^]'. SunOS 5.8 login: mgcusr Password: PGW2200A% cd /opt/Toolkit/bin/ mgcusr@PGW2200A% setenv DISPLAY workstation_name:0.0 !--- Replace "workstation_name" with the workstation !--- where you wish to display this application. mgcusr@PGW2200A% toolbar.sh cdr
This is an example of the GUI provided by issuing the toolbar.sh cdr command:
- Voice Technology Support
- Voice and IP Communications Product Support
- Troubleshooting Cisco IP Telephony
- Technical Support & Documentation - Cisco Systems
|Updated: Feb 02, 2006||Document ID: 60109|