Table of Contents

index

Numerics

1.544-Mbps (T1) port adapter

ATM connections supported   9-3

connectors   9-7

interfaces, cables supported   9-6

LED descriptions   9-8

overview   9-2

1.544-Mbps (T1 IMA) port adapter

ATM connections supported   10-3

connectors   10-8

interfaces, cables supported   10-8

LED descriptions   10-10

overview   10-1

155-Mbps port adapter

ATM connections supported   4-3

connectors   4-5

interfaces, cables supported   4-4

LED descriptions   4-7

overview   4-2

2.048-Mbps (E1) port adapter

ATM connections supported   9-3

connectors   9-7

interfaces, cables supported   9-6

LED descriptions   9-8

overview   9-2

2.048-Mbps (E1 IMA) port adapter

ATM connections supported   10-3

connectors   10-8

interfaces, cables supported   10-8

LED descriptions   10-10

overview   10-1

25-Mbps port adapter

ATM connections supported   3-3

connectors   3-4

interfaces, cables supported   3-4

LED descriptions   3-5

overview   3-1

622-Mbps port adapter

ATM connections supported   6-2

connectors   6-4

interfaces, cables supported   6-4

LED descriptions   6-6

overview   6-1

96-pin Molex connector

cable (figure)   2-10

pinouts   B-4, B-6

A

agency approvals, JATE

DS3   4-4, 13-4

OC-12c   5-3, 7-3

T1   9-4

T1 IMA   10-5

ATM connections

155-Mbps port adapter   4-5

25-Mbps port adapter   3-4

622-Mbps port adapter   6-4

ATM Router Module   15-3

CDS3 Frame Relay port adapter   14-4

CE1 Frame Relay port adapter   11-4

CES T1 and E1 port adapters   12-5

distance limitations   2-3

DS3, E3, E1, and CES E1 connections   2-6

DS3 and E3 port adapters   13-5

equipment requirements   2-4

fiber-optic   2-4

OC-12c interface module   7-4

OC-3c interface module   5-4

OC-48c interface module   8-3

RG-59 coaxial cable   2-6

T1 and E1 IMA port adapters   10-8

T1 and E1 port adapters   9-7

UTP traffic   2-5

ATM Router Module

ATM connections supported   15-3

LED descriptions   15-5

overview   15-1

ATM Traffic-Shaping Carrier Module

see TSCAM   16-1

B

backplane

carrier module

orientation   2-14, 2-21

troubleshooting, system crash   2-21

connector pins, disconnecting   2-13

guidelines for removing equipment   2-12

interface module

orientation   2-26

troubleshooting, system crash   2-26

port adapter, orientation   2-16, 2-25

BNC connector

CDS3 Frame Relay port adapter   14-4

CES E1 port adapter   2-9

CES port adapter   12-5

DS3, E3, E1, and CES E1 connections   2-6

DS3 and E3 port adapters   13-5

specifications   A-5

T1 and E1 port adapters   9-6

C

cable management bracket   10-9

cables

25-Mbps, multiple connection   2-10

96-pin Molex to 12 RJ-45 multileg   2-10

coaxial, with BNC connectors   2-6

maximum lengths   2-3

pinouts   B-1  to B-6

RJ-45 and RJ-48c connectors   2-5

capacitor clip, reducing emissions   2-8

captive installation screws

carrier module

installing   2-21

removing   2-14

figure   2-13

interface module

installing   2-26

removing   2-16

port adapter

installing   2-25

removing   2-15

card/subcard/port address   1-5

carrier detect (CD) LED descriptions

622-Mbps port adapter   6-6

CDS3 Frame Relay port adapter   14-5

CE1 Frame Relay port adapter   11-5

CES T1 and E1 port adapters   12-7

DS3 and E3 port adapters   13-7

OC-12c interface module   7-6

OC-3c interface module   5-5

OC-48c interface module   8-7

T1 and E1 IMA port adapters   10-10

T1 and E1 port adapters   9-8

carrier module

filler plate   2-21

installing   2-19  to 2-22

removing   2-14

specifications   A-2

CBR   12-1

CD LED

See carrier detect (CD) LED descriptions

CDS3 Frame Relay port adapter

ATM connections supported   14-2

connectors   14-4

interfaces, cables supported   14-4

LED descriptions   14-5

overview   14-1

CE1 Frame Relay port adapter

ATM connections supported   11-3

connectors   11-4

interfaces, cables supported   11-4

LED descriptions   11-5

CES   12-1

CES T1 and E1 port adapters

ATM connections supported   12-3

cabling impedance   2-6

CES E1 receive port capacitor clip   2-8

connectors   2-6, 12-1, 12-5

interfaces, cables supported   12-5

LED descriptions   12-7

overview   12-1

channelized E1 Frame Relay port adapter. See CE1 Frame Relay port adapter

circuit emulation service. See CES

clocking options, port adapters   1-7

commands

show configuration   2-22, 2-25, 2-27

show interface   1-6

show interface atm   1-7, 2-22, 2-25, 2-27

connectors

155-Mbps port adapter   4-2, 4-5

25-Mbps port adapter   2-10, 3-1, 3-4

622-Mbps port adapter   6-1, 6-4

96-pin Molex connector (figure)   3-3

BNC connector, with coaxial cable (figure)   2-6

CDS3 Frame Relay port adapter   14-1, 14-4

CE1 Frame Relay port adapter   11-4

CES T1 and E1 port adapters   12-1, 12-5

DS3 and E3 port adapters   13-1, 13-5

fiber-optic, MT-RJ (figure)   2-5

fiber-optic, SC-type (figure)   2-4, 2-5

OC-12c interface module   7-1, 7-4

OC-3c interface module   5-1, 5-4

OC-48c interface module   8-1, 8-5

RJ-45 and RJ-48c connectors (figure)   2-5

T1 and E1 IMA port adapters   10-2, 10-8

T1 and E1 port adapters   9-2, 9-7

constant bit rate. See CBR

CS-03 certification   10-6  to 10-7

D

distance limitations, ATM connections   2-3

DS3 and E3 port adapters

ATM connections supported   13-3

connectors   13-5

DS3 JATE approvals   4-4, 5-3, 7-3, 9-4, 10-5, 13-4

E3 receive port capacitor clip   2-8

interfaces, cables supported   13-5

LED descriptions   13-7

overview   13-1

E

E1 and T1 port adapters

ATM connections supported   9-3, 10-3

connectors   9-7, 10-8

interfaces, cables supported   9-6, 10-8

LED descriptions   9-8, 10-10

overview   9-2, 10-1

E1 CES port adapter. See CES T1 and E1 port adapters

E3 and DS3 port adapters

ATM connections supported   13-3

connectors   13-5

DS3 JATE approvals   4-4, 5-3, 7-3, 13-4

E3 receive port capacitor clip   2-8

interfaces, cables supported   13-5

LED descriptions   13-7

overview   13-1

EMI

capacitor clip   2-8

factors   2-8

F

FCC Part 68 Notice   9-4, 10-5, 12-3

fiber-optic

connector, MT-RJ (figure)   2-5

connector, SC-type (figure)   2-4, 2-5

traffic   2-4

fiber-optic cable

distance limits   2-3

filler plate

carrier module   2-21

interface module   2-26

H

hot swapping, equipment supported   2-11

humidity, specifications   A-2

I

installing

carrier module   2-19  to 2-22

interface module   2-26  to 2-27

port adapter   2-24  to 2-26

interface module

description   1-3

filler plate   2-26

installing   2-26  to 2-27

removing   2-16

slot assignment   1-3

inverse multiplexing over ATM. See IMA

J

JATE approvals

DS3   4-4, 13-4

OC-12c   5-3, 7-3

T1   9-4

T1 IMA   10-5

L

LED descriptions

155-Mbps port adapter   4-7

25-Mbps port adapters   3-5

622-Mbps port adapter   6-6

ATM Router Module   15-5

CDS3 Frame Relay port adapter   14-5

CE1 Frame Relay port adapter   11-5

CES T1 and E1 port adapters   12-7

DS3 and E3 port adapters   13-7

OC-12c interface module   7-6

OC-3c interface module   5-5

OC-48c interface module   8-7

T1 and E1 IMA port adapters   10-10

T1 and E1 port adapters   9-8

M

module

See processor card, carrier module, port adapters, or interface module

Molex (96-pin) connector

cable illustration   2-10

pinouts   B-4, B-6

MT-RJ connector

fiber-optic traffic, for use with   2-4

figure   2-5

N

network connections

ATM equipment requirements   2-4

connectors

BNC, with coaxial cable (figure)   2-6

fiber-optic, MT-RJ (figure)   2-5

fiber-optic, SC-type (figure)   2-5

RJ-45 connector   2-5, B-2

RJ-48c connector   2-5, B-3

distance limits   2-2  to 2-4

site preparation   2-2  to 2-10

special considerations   2-8  to 2-10

traffic

DS3, E3, E1, and CES E1   2-6

fiber-optic   2-4

switch to wiring closet patch panel   2-10

T1 and E1   2-6

UTP   2-5

nonoperating temperature specifications   A-2

O

OC-12c interface module

ATM connections supported   7-2

connectors   7-4

interfaces, cables supported   7-4

LED descriptions   7-6

overview   7-1

OC-3c interface module

ATM connections supported   5-2

connectors   5-4

interfaces, cables supported   5-4

LED descriptions   5-5

overview   5-1

OC-48c interface module

ATM connections supported   8-3

connectors   8-5

interfaces, cables supported   8-5

LED descriptions   8-7

overview   8-1

P

PBX   12-1

physical interface address   1-5

physical layer interface module. See PLIM

pinouts   B-1  to B-6

PLIM   9-6, 10-8, 11-4

port adapters

clocking options   1-7

description   1-3

features   1-5  to 1-7

figure   1-4

installing   2-24

port addresses   1-5  to 1-7

removing   2-15

slot assignment   1-3

slot numbers (figure)   2-24

specifications   A-2

traffic pacing   1-7

port addresses

identifying module ports   1-6

processor card

figure   2-13

hot swapping   2-11

installing   2-11

removing   2-13

required system component   2-19

reserved slot   1-3

R

receive (RX) LED descriptions

155-Mbps port adapter   4-7

25-Mbps port adapter   3-5

622-Mbps port adapter   6-6

CDS3 Frame Relay port adapter   14-5

CE1 Frame Relay port adapter   11-5

CES T1 and E1 port adapters   12-7

DS3 and E3 port adapters   13-7

OC-12c interface module   7-6

OC-3c interface module   5-5

OC-48c interface module   8-7

T1 and E1 IMA port adapters   10-10

T1 and E1 port adapters   9-8

release levers (figure)   2-13

removing

carrier module   2-14

interface module   2-16

port adapters   2-15

RG-59 coaxial cable   2-6

RJ-45 connector

figure   2-5

UTP traffic, for use with   2-5

RJ-48c connector

figure   2-5

pinouts   B-3

T1 and E1 traffic, for use with   2-6

S

safety

preinstall   2-1

warnings   C-1

SC-type fiber-optic connector   2-4, 2-5

show configuration command   2-22, 2-25, 2-27

show interface atm command   1-7, 2-22, 2-25, 2-27

show interface command   1-6

signal descriptions, pinout   B-1

slot numbers   1-5

specifications

carrier module   A-2

pinouts   B-1

port adapter   A-2

system specifications (table)   A-2

T

T1 and E1 IMA port adapters

ATM connections supported   10-3

connectors   10-8

IMA group   10-1

interfaces, cables supported   10-8

LED descriptions   10-10

overview   10-1

T1 and E1 port adapters

ATM connections supported   9-3

connectors   9-7

E1 receive port capacitor clip   2-8

interfaces, cables supported   9-6

LED descriptions   9-8

overview   9-2

T1 CES port adapter. See CES T1 and E1 port adapters

T1 IMA port adapter

FCC Part 68 notice   10-5

T1 port adapter, FCC Part 68 notice   9-4

temperature specifications

nonoperating   A-2

operating   A-2

traffic pacing, port adapters   1-7

translated safety warnings   C-1

transmission distances, maximum   2-3

transmit (TX) LED descriptions

155-Mbps port adapter   4-7

622-Mbps port adapter   6-6

CDS3 Frame Relay port adapter   14-5

CE1 Frame Relay port adapter   11-5

CES T1 and E1 port adapters   12-7

DS3 and E3 port adapters   13-7

OC-12c interface module   7-6

OC-3c interface module   5-5

OC-48c interface module   8-7

T1 and E1 IMA port adapters   10-10

T1 and E1 port adapters   9-8

troubleshooting, system crashes   2-21, 2-26

TSCAM

aggregate bandwidth   16-2

available bit rate (ABR)   16-4

best-effort traffic   16-2, 16-4

Cisco IOS Release compatibility   16-1

compatible port adapters   16-1

features   16-1

hardware and software requirements   16-4

number per switch router   16-2

online insertion and removal feature (OIR)   16-2

peak cell rate (PCR)   16-4

per-class queuing feature card   16-5

per-flow queuing feature card   16-5

power supply   16-5

switch router compatibility   16-1

traffic classes   16-2, 16-3

UBR   16-4

unspecified bit rate (UBR) VP tunnels   16-4

variable rate bit (VBR)   16-2

virtual circuits   16-2

virtual path (VP) tunnels   16-4

U

UTP connections   12-1

W

warnings

conventions   xvii

description   xvii