Table of Contents
Processor Card Specifications
The processor card specifications are described in Table A-1.
For the system chassis and common equipment specifications, refer to the Hardware Installation Guide or the Catalyst 8540 Chassis Installation Guide. For port adapter specifications, refer to the ATM Port Adapter and Interface Module Installation Guide.
Table A-1: Processor Card Specifications
| Description |
Specifications |
|
Processor card capacity
|
Catalyst 8540 MSR: 40-Gbps shared memory, nonblocking switch fabric, up to 32-KB frames
Catalyst 8510 MSR, LightStream 1010, Catalyst 5500:
5-Gbps shared memory, nonblocking switch fabric, 65,536 cells of ATM cell buffers
|
|
Dimensions (H x W x D)
|
1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm)
|
|
Weight
|
6.85 lb (3.09 kg)
|
|
DC voltages supplied and steady-state maximum current ratings
|
Catalyst 8540 MSR: +5V @ 1.8A1, +12V @ 2A, +3.3V @ 4A
Catalyst 8510 MSR, LightStream 1010, Catalyst 5500:
+5V @ 15A, +24V @ 25mA, +12V @ 500mA
|
|
Operating temperature
|
32 to 104ºF (0 to 40ºC)
|
|
Nonoperating temperature
|
Catalyst 8540 MSR, Catalyst 8510 MSR, LightStream 1010:
-40 to 167ºF (-40 to 75ºC)
Catalyst 5500: -40 to 158ºF (-40 to 70ºC
|
|
Humidity
|
10 to 90%, noncondensing
|
|
Altitude
|
-500 to 10,000 ft. (-52 to 3048 m)
|
|
Microprocessor
|
100-MHz MIP2 R4700
|
|
Memory
|
8-MB Flash memory SIMM (upgradable to 16 MB)
32-MB DRAM3 default for FC-PCQ4 (upgradable to 64 MB) 64-MB DRAM default for FC-PFQ5
256-KB boot EPROM6
128-KB SRAM7
No Flash PC Card installed by default (accepts 8-MB, 16-MB, or 20-MB Intel Series 2+ Flash PC Cards)
|
|
Management access
|
Standard Ethernet and dual EIA/TIA-2328 serial ports on the processor card
|
|
Interface ports
|
RJ-45 IEEE9 802.3 Ethernet 10BaseT port
DB-25 EIA/TIA-232 auxiliary port and a
DB-25 console port for an administration workstation
|
|
Agency Approvals
|
UL10 1950 (U.S.)
CSA11 950 (Canada)
EN1260950 (European Union)
CE Marking
TUV13 GS (Germany)
IEC14 950 (International)
AS/NZS15 3260 (Australia/New Zealand)
FCC16 Part 15 (CFR 47) Class A
VCCI17 Class A with UTP and Class B with shielded cables (Japan)
EN55022 Class A with UTP and Class B with shielded cables (European Union)
CISPR18 22 Class A with UTP and Class B with shielded cables (International)
AS/NZS 3548 Class A with UTP and class B with shielded cables
|
1A = amperes
2MIP = MultiChannel Interface Processor
3DRAM = dynamic random-access memory
4FC-PCQ = feature card per class queuing
5FC-PFQ = feature card per flow queuing
6EPROM = erasable programmable read-only memory
7SRAM = static random-access memory
8EIA/TIA = Electronic Industries Association/Telecommunications Industry Association
9IEEE = Institute of Electrical and Electronics Engineers
10UL = Underwriters Laboratory
11CSA = Canadian Standards Association
12EN = European Norm
13TUV = German Test Agency
14IEC = International Electrotechnical Commission
15AS/NZS Australia/New Zealand Standards
16FCC = Federal Communications Commission
17VCCI = Voluntary Control Council for Interference
18CISPR = Comite International Special Des Perturbations Radioelectriques
|
