Document ID: 12042
This document describes the password recovery procedure for the Catalyst 2600, 3000, 3100, and 3200 switches. To recover the password on Cisco 2600 Series Routers, see Password Recovery Procedure for the Cisco 2600 Series Routers.
For more information on document conventions, see the Cisco Technical Tips Conventions.
There are no specific prerequisites for this document.
To recover your password, follow the steps below:
Press the SysReq button on the switch (next to the Reset button).
Caution: When you clear nonvolatile RAM (NVRAM), the password is cleared but all configuration parameters are also reset to their default values. This means losing all options previously configured on the switch.
Move the arrow key to clear NVRAM.
The system reboots and no password is required.
|Updated: Apr 10, 2006||Document ID: 12042|