Table A-1 Component Specifications
Description
|
Specifications
|
Route processor capacity
|
40-Gbps shared memory, nonblocking switch fabric up to 32-KB frames
|
Dimensions (H x W x D)
|
Modules: 1.2 x 14.4 x 16 in. (3.05 x 36.6 x 40.6 cm) Port adapter: 1.2 x 6.5 x 10 in. (3.05 x 16.5 x 25.4 cm) Chassis: 25 x 17.75 x 19.75 in. (63.5 x 45.09 x 50.17 cm)
|
Weight
|
Processor: 6.85 lb (3.11 kg) Modules: 3.55 lb (1.61 kg) Chassis: 70 lb (31.75 kg)
|
Maximum dissipated power at -48VDC1
|
Chassis: 1A2
Power supply, DC: 1/2A
Route processor: 2A
Switch processor: 3A
Two-port Gigabit Ethernet Interface Module: 2A
Two-port enhanced Gigabit Ethernet interface module: 2A
Eight-port Gigabit Ethernet interface module: 3A
10/100BaseT interface module: 2A
100BaseFX interface module: 2A
Packet-over-SONET uplink with enhanced Gigabit Ethernet interface module: 2A
ATM uplink with enhanced Gigabit Ethernet interface module: 1.7A
|
DC voltages supplied and steady-state maximum current ratings
|
System: +5V3 @ 1.8A +12V @ 2A +3.3V @ 4A
|
Operating temperature
|
32 to 104×F (0 to 40×C)
|
Nonoperating temperature
|
-40 to 167×F (-40 to 75×C)
|
Humidity
|
10 to 90%, noncondensing
|
Altitude
|
-500 to 10,000 ft (-152 to 3048 m)
|
Microprocessor
|
100-MHz MIP4 R4700
|
Memory
|
16-MB Flash memory SIMM5 (upgradable to 16 MB) 256-MB DRAM6 256K boot EPROM7 128K SRAM8 No Flash PC Card installed by default (accepts 8-, 16-, or 20-MB Intel Series 2+ Flash PC Cards)
|
Management access
|
Standard Ethernet and EIA/TIA-232 serial port on the route processor
|
Interface ports
|
RJ-45 IEEE 802.3 Ethernet 10BaseT port DB-25 console port for an administration workstation
|
Interface modules
|
8 Gigabit Ethernet ports (multimode or single-mode fiber); 64K 2 Gigabit Ethernet ports (multimode or single-mode fiber); 16K or 64K 2 Enhanced Gigabit Ethernet ports (multimode or single-mode fiber); 16K, 64K, or 256K 16 10/100BaseT Ethernet ports (RJ-45), 16K or 64K 16 100BaseFX Ethernet ports (multimode fiber); 16K or 64K 1 ATM OC-3c uplink port (multimode or single-mode fiber); 64K 1 ATM OC-12c uplink port (multimode or single-mode fiber); 64K or 256K 1 Packet-over-SONET OC-12c uplink port (single-mode fiber); 64K
|
Network management
|
Port Tx9 , Rx10 , and link LEDs Switch and common equipment status LEDs Uplink interface Opt-Det, Alarm, and C\D LEDs Multiple standard and Enterprise MIBs Text-based command-line interface based on familiar router interface Standard Cisco IOS security capabilities: password and TACACS Telnet, TFTP, BOOTP11
|
MIBs
|
SNMP12 MIB II (RFC 1213) Interface table MIB (RFC 1573) CISCO-CDP-MIB CISCO-BRIDGE-MIB
|
Maximum station-to-station cabling distance
|
UTP13 cable: 328 ft (100 m) with four or fewer separate cable segments on the path; 50/125-micron and 62.5/125-micron multimode fiber: 1640 ft (500 m)
|
Fiber-optic power levels: Transmit Receive
|
1261 to 1360 nm14 Minimum: -15.0 dBm15 Maximum: -8.0 dBm Minimum: -28.0 dBm Maximum: -8.0 dBm
|
Compliance:
|
CE Marking (European Union)
|
Safety
|
UL16 1950, CSA17 -C22.2 No. 950, EN18 60950, IEC19 60950, TS20 001, AS/NZS21 3260 IEC 60825, EN 60825, 21CFR22 1040
|
EMI
|
FCC23 Part 15 Class A (CFR 47 , Part 15), CISPR 22 Class A, EN 55022 Class A, VCCI24 Class A, and AS/NZS 3548 Class A with UTP cables; EN 55022 Class B, CISPR 22 Class B, VCCI Class B, and AS/NZS 3548, Class B with FTP cables25
|