Cisco BPX 8600 Series Switches Troubleshooting TechNotes

Some links below may open a new browser window () to display the document you selected.

- Active and Standby Control Card States During a WAN Switch Software Upgrade
  04/Oct/2005
- B-Frame Parity Errors
  04/Oct/2005
- Bad Grant Errors
  06/Dec/2006
- BPX Installation Quick Reference Guide
  12/Jan/2006
- BPX Slot Errors
  06/Mar/2006
- BPX TX BIP-16 Errors
  04/Oct/2005
- Bug Navigator
- Bus Parity Errors
  06/Dec/2006
- BXM Trunk Troubleshooting
  04/Oct/2005
- CCITT Network Alarms
- CK-192 Errors
  06/Dec/2006
- Configuring and Troubleshooting ATM Connection Configurations and Cisco BPX 8600 Series Switches
  01/Dec/2005
- Configuring ATM-PPP Internetworking
  10/Nov/2005
- During Connection Rerouting CPE Receives Alarm Indicator Signaling LOS
  12/Jan/2006
- Enabling Node-by-Node Upgrade Compatibility for Version Interoperability Upgrade
  04/Oct/2005
- Explaining WAN Switch Software Resource Aborts
  04/Oct/2005
- Explanation of an Abort 1M3 (1000003)
  02/Feb/2007
- General Firmware Download Information for the IPX, IGX, and BPX
  04/Oct/2005
- Guide to New Names and Colors for WAN Switching Products
  04/Oct/2005
- How to Decode System Software Bus-based Aborts
  04/Oct/2005
- How to determine the Length of Time a BPX BCC Processor Has Been Active
  04/Oct/2005
- How to Tell BXM-E Cards from BXM Cards
  04/Oct/2005
- IGX/BPX Card Hardware and Firmware Version Determination
  04/Oct/2005
- Invalid Rx Port Errors
  06/Oct/2005
- IPX, IGX, or BPX Card Resets While Burning Firmware
  04/Oct/2005
- Monitoring Rx invalid addresses Messages on LSCs Connected to BXMs
  04/Oct/2005
- Poll Clock Errors
  06/Dec/2006
- Recovering Real Time
  06/Oct/2005
- Rx BIP-16 Errors
  03/Jan/2006
- Rx FIFO Sync Errors
  06/Dec/2006
- Saving and Restoring Configurations on IPX, IGX, and BPX Nodes (CWM Needed)
  04/Oct/2005
- Serial Interface Unit Phase Errors (also known as CLKFAIL)
  02/Oct/2006
- Software Error 945
  12/Jan/2006
- Software Error 586
  04/Oct/2005
- Software Error 514
  22/Nov/2006
- Software Error 506
  06/Oct/2005
- Software Error 364
  02/Feb/2007
- Solving the Error Message "Not enough Auto Stats Memory, Reconfigure using cnfnodeparm"
  04/Oct/2005
- Standby PRBS Errors
  04/Oct/2005
- The cnfnodeparm Command Parameters for IGX 8400/BPX 8600 Switches
  04/Oct/2005
- The dsptech Command in IGX/BPX Platforms
  04/Oct/2005
- Troubleshooting Data Discard Between MGX 8220-BPX Network-MGX 8220
  05/Oct/2005
- Troubleshooting Tips for Software Release 8.4
  12/Jan/2006
- Unable to Download BPX or IGX Card Firmware (getfwrev) from Cisco WAN Manager
  22/Nov/2006
- Understanding and Enabling Software Functions (cnfswfunc) on BPX 8600 Switches
  04/Oct/2005
- Understanding BXM Card Error ST Err: OBJ ID:30 Err:0x00000001
  01/Mar/2007
- Understanding dspalms Command Output
  04/Oct/2005
- Upgrading Firmware for Non-Control Cards
  04/Oct/2005
- Using TFTP on a PC to Download WAN Switch Software and Firmware
  04/Oct/2005
- Using TFTP to Download Firmware to an IPX, IGX, or BPX
  04/Oct/2005
- WAN Switch Software Node-by-Node Upgrade Script
  04/Oct/2005
- WAN Switch Software Upgrade Planner
  04/Oct/2005
- WAN Switch Software Upgrade Script
  04/Oct/2005
- WAN Switching Network Synchronization Fundamentals
  04/Oct/2005
- WAN Switching Software Upgrade Roadmap
  04/Oct/2005
- Why Network Changes Can't Be Made when BPX 8600 or IGX 8400 Nodes Are Unreachable
  04/Oct/2005

Hierarchical Navigation

Cisco BPX 8600 Series Switches

Troubleshooting TechNotes

Related Tools