Overview: Cisco 7600 Series SIPs

Table Of Contents

Overview: Cisco 7600 Series SIPs

SIP Summary

Checking Hardware and Software Compatibility

Identifying Slots and Subslots for SIPs and SPAs

Cisco 7600 SIP-200 Overview

Cisco 7600 SIP-200 Processor

Cisco 7600 SIP-200 LEDs

Cisco 7600 SIP-200 Physical Specifications

Cisco 7600 SIP-200 Memory Options

Cisco 7600 SIP-200 Default DIP Switch Settings

Cisco 7600 SIP-400 Overview

Cisco 7600 SIP-400 Processor

Cisco 7600 SIP-400 LEDs

Cisco 7600 SIP-400 Physical Specifications

Cisco 7600 SIP-600 Overview

Cisco 7600 SIP-600 Processor

Cisco 7600 SIP-600 LEDs

Cisco 7600 SIP-600 Physical Specifications

Cisco 7600 SSC-400 Overview

Cisco 7600 SSC-400 Processor

Cisco 7600 SSC-400 LED

Cisco 7600 SSC-400 Physical Specifications


Overview: Cisco 7600 Series SIPs


This chapter describes the SPA interface processors (SIPs) that are supported on the Cisco 7600 series routers and contains the following sections:

SIP Summary

Identifying Slots and Subslots for SIPs and SPAs

Cisco 7600 SIP-200 Overview

Cisco 7600 SIP-400 Overview

Cisco 7600 SIP-600 Overview

Cisco 7600 SSC-400 Overview

SIP Summary

Summary descriptions of the SIPs that are supported on the Cisco 7600 series routers are shown in Table 2-1.


Note The Description column indicates the aggregate bandwidth supported by the SIP across all subslots—not per SPA subslot.


Table 2-1 SIP Summary

SIP
Product Number
Description
Maximum Number of SPAs
Minimum Cisco IOS Release

Cisco 7600 SIP-200

7600-SIP-200

622-Mbps SPA interface processor

4

12.2(18)SXE

Cisco 7600 SIP-400

7600-SIP-400

2.5-Gbps SPA interface processor

4

12.2(18)SXE

Cisco 7600 SIP-600

7600-SIP-600

1 x 10-Gbps SPA Interface Processor

1

12.2(18)SXF

Cisco 7600 SSC-400

7600-SSC-400

SPA services carrier

2

12.2(18)SXE2


Checking Hardware and Software Compatibility

To check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether SIPs or SPAs within a system are compatible, but it does provide the minimum Cisco IOS requirements for individual hardware modules or components.


Note Access to this tool is limited to users with Cisco.com login accounts.


To access Software Advisor, click Login at Cisco.com, type "Software Advisor" in the SEARCH box, and click GO. Click the link for the Software Advisor tool.

Choose a product family or enter a specific product number to search for the minimum supported software release needed for your hardware.

Identifying Slots and Subslots for SIPs and SPAs

This section describes how to specify the physical locations of a SIP and SPA on the Cisco 7600 series routers within the command-line interface (CLI) to configure or monitor those devices.


Note For simplicity, any reference to "SIP" in this section also applies to the SSC.


Specifying the Slot Location for a SIP or SSC

The Cisco 7600 series router supports different chassis models, each of which supports a certain number of chassis slots.


Note The Cisco 7600 series router SIPs are not supported with a Supervisor Engine 1, Supervisor Engine 1A, Supervisor Engine 2, or Supervisor Engine 720-3A.


Figure 2-1 shows an example of a SIP installed in slot 6 on a Cisco 7609 router. The Cisco 7609 router has nine vertically-oriented chassis slots, which are numbered 1 to 9 from right to left.

Figure 2-1 SIP and SPA Installed in a Cisco 7609 Router

Figure 2-2 shows an example of a SIP installed in slot 6 on a Catalyst 6509 switch. The Catalyst 6509 switch has nine horizontally-oriented chassis slots, which are numbered 1 to 9 from right to left.

Figure 2-2 SIP and SPA Installed in a Catalyst 6509 Switch

1

SIP subslot 0

4

SIP subslot 3

2

SIP subslot 1

5

Chassis slots 1-9 (numbered from right to left)(numbered from top to bottom)

3

SIP subslot 2

   

Some commands allow you to display information about the SIP itself, such as show module, show sip-disk, show idprom module, show hw-module slot, and show diagbus. These commands require you to specify the chassis slot location where the SIP that you want information about is installed.

For example, to display status and information about the SIP installed in slot 6 as shown in Figure 2-1, enter the following command:

Router# show module 6

For more information about SIP commands, see the "Command Summary for the SIPs and SSC" and the "SIP, SSC, and SPA Commands" chapters in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide .

Specifying the SIP or SSC Subslot Location for a SPA

SIP subslots begin their numbering with "0" and have a horizontal or vertical orientation depending on the orientation of the SIP in the router chassis slot, as shown in the "SIP, SSC, and SPA Product Overview" chapter of the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide .

Figure 2-1 shows an example of a Cisco 7600 SIP-200 installed with a vertical orientation on a Cisco 7609 router. The Cisco 7600 SIP-200 supports four subslots for the installation of SPAs. In this example, the subslot locations are vertically oriented as follows:

SIP subslot 0—Top-right subslot

SIP subslot 1—Bottom-right subslot

SIP subslot 2—Top-left subslot

SIP subslot 3—Bottom-left subslot

Figure 2-3 shows the faceplate for the Cisco 7600 SIP-200 in a horizontal orientation.

Figure 2-3 Cisco 7600 SIP-200 Faceplate

In this view, the subslot locations in a horizontal orientation are as follows:

SIP subslot 0—Top-left subslot

SIP subslot 1—Top-right subslot

SIP subslot 2—Bottom-left subslot

SIP subslot 3—Bottom-right subslot

The SIP subslot numbering is indicated by a small numeric label beside the subslot on the faceplate.

Just as with the SIPs, some commands allow you to display information about the SPA itself, such as show idprom module and show hw-module subslot. These commands require you to specify both the physical location of the SIP and SPA in the format, slot/subslot, where:

slot—Specifies the chassis slot number in the Cisco 7600 series router where the SIP is installed.

subslot—Specifies the secondary slot of the SIP where the SPA is installed.

For example, to display the operational status for the SPA installed in the first subslot of the SIP in chassis slot 6 shown in Figure 2-1, enter the following command:

Router# show hw-module subslot 6/0 oir

For more information about SPA commands, see the command summary chapter for that SPA, and the "SIP, SSC, and SPA Commands" chapter in the Cisco 7600 Series Router SIP, SSC, and SPA Software Configuration Guide .

Cisco 7600 SIP-200 Overview

The following sections describe the Cisco 7600 SIP-200 (Cisco part number 7600-SIP-200):

Cisco 7600 SIP-200 Processor

Cisco 7600 SIP-200 LEDs

Cisco 7600 SIP-200 Physical Specifications

Cisco 7600 SIP-200 Memory Options

Cisco 7600 SIP-200 Default DIP Switch Settings

Cisco 7600 SIP-200 Processor

The processor on a Cisco 7600 SIP-200 is described in Table 2-2.

Table 2-2 Cisco 7600 SIP-200 Processor

Type
Speed
Description

CPU

800 megahertz (MHz) internal operating frequency

Broadcom 1125 MIPS-based design


Cisco 7600 SIP-200 LEDs

The Cisco 7600 SIP-200 has one LED, as shown in Figure 2-4.

Figure 2-4 Cisco 7600 SIP-200 Faceplate

The Cisco 7600 SIP-200 LED is described in Table 2-3.

Table 2-3 Cisco 7600 SIP-200 LED

LED Label
Color
State
Meaning

STATUS

Red

On

The SIP has encountered an error.

 

Green

On

The SIP is online.

 

Yellow

On

The SIP is loading.

 

Off

Off

The SIP is powered off.


Cisco 7600 SIP-200 Physical Specifications

The Cisco 7600 SIP-200 physical specifications are shown in Table 2-4.

Table 2-4 Cisco 7600 SIP-200 Physical Specifications

Description
Specifications

Physical dimensions

The SIP occupies one module slot and can be operated in Cisco 7600 series routers.

Shipping weight

8 lb (3.64 kg)

Operating temperature

32 to 104°F (0 to 40°C)

Relative humidity

10 to 90 percent, noncondensing

Storage temperature

-4 to 149°F (-20 to 65°C)


Cisco 7600 SIP-200 Memory Options

The following table lists the memory available for the Cisco 7600 SIP-200:

Table 2-5 SIP Memory Options

SIP
Memory Options

Cisco 7600 SIP-200

512 MB and 1 GB (2 x 256-MB or 2 x 512-MB DIMMs)



Note The SIP DIMMs must be a matched set. A warning message appears on the console if the DIMMs on the SIP are different sizes. If the sizes are not the same, the following message appears at bootup/OIR:

C7600_SIP200-3-MEM_MODULE_MISMATCH: Memory modules are not identical


Cisco 7600 SIP-200 Memory Installation and Removal

Figure 2-5 shows the location of the DIMMs on a Cisco 7600 SIP-200. Perform the following procedure to install and remove a DIMM:

To install a DIMM, slide the DIMM into the slot. The retaining clips secure the DIMM in place.


Step 1 To remove a DIMM, separate the two retaining clips.

Step 2 Pull the DIMM from the slot.


Figure 2-5 SIP DIMM Location

1

DIMMs


Cisco 7600 SIP-200 Default DIP Switch Settings

If SW3 and SW10 switches are present on the board, make sure they are set to the default settings, as shown in Table 2-6. See Figure 2-6 for the location of the switches.

The switches are set to their defaults during manufacture. However, the switch settings may get inadvertently changed during handling.


Note If the switches are not set to their default settings, there may be momentary packet drops during OIR of the board.


Table 2-6 Cisco 7600 SIP-200 Default DIP Settings

Switch
Default Position

SW3

Up

SW10

Down


Figure 2-6 Cisco 7600 SIP-200 DIP Switch Locations

\

1

SW3

2

SW10


Cisco 7600 SIP-400 Overview

The following sections describe the Cisco 7600 SIP-400 (Cisco part number 7600-SIP-400):

Cisco 7600 SIP-400 Processor

Cisco 7600 SIP-400 LEDs

Cisco 7600 SIP-400 Physical Specifications

Cisco 7600 SIP-400 Processor

The processor on a Cisco 7600 SIP-400 is described in Table 2-7.

Table 2-7 7600-SIP-400 Processor

Type
Speed
Description

CPU

400 megahertz (MHz) internal operating frequency

Broadcom 1125 MIPS-based design


Cisco 7600 SIP-400 LEDs

The Cisco 7600 SIP-400 has one LED, as shown in Figure 2-7.

Figure 2-7 Cisco 7600 SIP-400 Faceplate

The Cisco 7600 SIP-400 LED is described in Table 2-8.

Table 2-8 Cisco 7600 SIP-400 LED

LED Label
Color
State
Meaning

STATUS

Red

On

The SIP has encountered an error.

 

Green

On

The SIP is online.

 

Yellow

On

The SIP is loading.

 

Off

Off

The SIP is powered off.


Cisco 7600 SIP-400 Physical Specifications

The Cisco 7600 SIP-400 physical specifications are shown in Table 2-9.

Table 2-9 Cisco 7600 SIP-400 Physical Specifications

Description
Specifications

Physical dimensions

The SIP occupies one module slot and can be operated in Cisco 7600 series routers.

Shipping weight

8 lb (3.64 kg)

Operating temperature

32 to 104°F (0 to 40°C)

Relative humidity

10 to 90 percent, noncondensing

Storage temperature

-4 to 149°F (-20 to 65°C)


Cisco 7600 SIP-600 Overview

The following sections describe the Cisco 7600 SIP-600 (Cisco part number 7600-SIP-600):

Cisco 7600 SIP-600 Processor

Cisco 7600 SIP-600 LEDs

Cisco 7600 SIP-600 Physical Specifications

Cisco 7600 SIP-600 Processor

The processor on a Cisco 7600 SIP-600 is described in Table 2-10.

Table 2-10 Cisco 7600 SIP-600 Processor

Type
Speed
Description

CPU

400 megahertz (MHz) internal operating frequency

Broadcom 1125 MIPS-based design


Cisco 7600 SIP-600 LEDs

The Cisco 7600 SIP-600 has one LED, as shown in Figure 2-8.

Figure 2-8 Cisco 7600 SIP-600 Faceplate

The Cisco 7600 SIP-600 LED is described in Table 2-11.

Table 2-11 Cisco 7600 SIP-600 LED

LED Label
Color
State
Meaning

STATUS

Red

On

The SIP has encountered an error.

 

Green

On

The SIP is online.

 

Yellow

On

The SIP is loading.

 

Off

The SIP is powered off.


Cisco 7600 SIP-600 Physical Specifications

The Cisco 7600 SIP-600 physical specifications are shown in Table 2-12.

Table 2-12 Cisco 7600 SIP-600 Physical Specifications

Description
Specifications

Physical dimensions

The SIP occupies one module slot and can be operated in Cisco 7600 series routers. The Cisco 7600-SIP-600 supports installation of only a single SPA in the first subslot.

Shipping weight

8 lb (3.64 kg)

Operating temperature

32 to 104°F (0 to 40°C)

Relative humidity

10 to 90 percent, noncondensing

Storage temperature

-4 to 149°F (-20 to 65°C)


Cisco 7600 SSC-400 Overview

The following sections describe the SPA services carrier (Cisco part number 7600-SSC-400):

Cisco 7600 SSC-400 Processor

Cisco 7600 SSC-400 LED

Cisco 7600 SSC-400 Physical Specifications

Cisco 7600 SSC-400 Processor

The processor on a Cisco 7600 SSC-400 is described in Table 2-13.

Table 2-13 7600-SSC-400 Processor

Type
Speed
Description

CPU

400 megahertz (MHz) internal operating frequency

Broadcom 1125 MIPS-based design


Cisco 7600 SSC-400 LED

The Cisco 7600 SSC-400 has one LED, as shown in Figure 2-9.

Figure 2-9 Cisco 7600 SSC-400 Faceplate

The Cisco 7600 SSC-400 LED is described in Table 2-14.

Table 2-14 Cisco 7600 SSC-400 LED

LED Label
Color
State
Meaning

STATUS

Red

On

The Cisco 7600 SSC-400 has encountered an error.

 

Green

On

The Cisco 7600 SSC-400 is online.

 

Yellow

On

The Cisco 7600 SSC-400 is loading.

 

Off

Off

The Cisco 7600 SSC-400 is powered off.


Cisco 7600 SSC-400 Physical Specifications

The Cisco 7600 SSC-400 physical specifications are shown in Table 2-15.

Table 2-15 Cisco 7600 SSC-400 Physical Specifications

Description
Specifications

Physical dimensions

The Cisco 7600 SSC-400 occupies one module slot and can be operated in Cisco 7600 series routers.

Shipping weight

8 lb (3.64 kg)

Operating temperature

32 to 104°F (0 to 40°C)

Relative humidity

10 to 90 percent, noncondensing

Storage temperature

-4 to 149°F (-20 to 65°C)