Cisco 6400 Series Broadband Aggregators Configuration Examples and TechNotes

Some links below may open a new browser window () to display the document you selected.

Cisco 6400 Broadband Aggregator
- Cisco 6400 NRP Configuration and Troubleshooting
  26/Feb/2008
- Configure a Cisco 6400 ATM Interface With RBE and DHCP
  26/Feb/2008
- Configuring a Cisco 6400 ATM Interface With RBE
  26/Feb/2008
- Configuring a Cisco 6400 NRP Using Point-to-Point and Multipoint Interfaces with PPPoA (aal5mux ppp)
  01/Jun/2005
- Configuring a Cisco 6400 NSP With Two NRPs (Internal Cross-Connect), 6130 NI-2
  25/Jan/2008
- Configuring a Cisco 6400 to Support MUX-PPP, SNAP, and Use an atm ilmi-pvc-discovery Subinterface
  23/Nov/2007
- Configuring a Cisco 6400 UAC Multipoint Interface Configured With PPPoE to Support a Remote Cisco 827 Router
  23/Nov/2007
- Configuring a Cisco 6130 NI-2 DSLAM Supporting a Cisco 6400 NSP and a Cisco NRP
  01/Jun/2005
- Configuring a Cisco 1700/2600/3600 ADSL WIC as a PPPoE Client With NAT
  26/Jun/2006
- Configuring a Cisco 1700/2600/3600 ADSL WIC to Support PPPoE Clients, Terminating on a Cisco 6400 UAC
  26/Feb/2008
- Configuring a Cisco 1700/2600/3600 ADSL WIC Using PPPoA With CHAP and PAP
  26/Feb/2008
- Configuring a Cisco 1700/2600/3600 ADSL WIC With a Single IP Address, DHCP, PPPoA, and PPP-PAP
  01/Jun/2005
- Configuring a Cisco 1700/2600/3600 ADSL WIC With IP Unnumbered E0, DHCP, PPPoA, and PPP-PAP
  26/Feb/2008
- Configuring a Cisco 1700/2600/3600 ADSL WIC With NAT, a DHCP Server, and Easy IP Using PPPoA (aal5mux ppp)
  26/Feb/2008
- Configuring a Cisco 827 Router and a Cisco 6400 Configured With IRB Using RFC1483 Bridging (aal5snap)
  23/Nov/2007
- Configuring a Cisco 827 Router Terminating on a Cisco 6400 in RBE Mode Using RFC1483 Bridging
  23/Nov/2007
- Configuring a Cisco 827 Router to Support PPPoE Clients, Terminating on a Cisco 6400 UAC
  26/Feb/2008
- Configuring a Cisco 827 Router Using PPPoA With CHAP and PAP
  23/Nov/2007
- Configuring a Cisco 827 Router With a Single IP Address, DHCP, and PPPoA
  25/Jan/2008
- Configuring a Cisco 827 Router With AAL5MUX IP Routing, Multiple PVCs, and Terminating on a Cisco 6400 UAC-NRP
  23/Nov/2007
- Configuring a Cisco 827 Router With IP Unnumbered E0, DHCP, PPPoA, and PPP-PAP
  01/Jun/2005
- Configuring a Cisco 827 Router With IRB and NAT Using RFC1483 Bridging
  01/Jun/2005
- Configuring a Cisco 827 Router With IRB, NAT, DHCP, and a Cisco 6400 With IRB Using RFC1483 Bridging (aal5snap)
  26/Feb/2008
- Configuring a Cisco 827 Router With NAT and Easy IP Using PPPoA (aal5mux ppp)
  26/Feb/2008
- Configuring a Cisco 827 Router With NAT, a DHCP Server, and Easy IP Using PPPoA (aal5mux ppp)
  23/Nov/2007
- Configuring a Cisco 827 Router With RFC1483 Routing Using AAL5SNAP Protocol IP
  23/Nov/2007
- Configuring a Cisco 827 Router With Two PVCs Using PPPoA (aal5mux ppp)
  23/Nov/2007
- Configuring a Cisco 827 Router With VoIP Supported IRB Using RFC1483 Bridging
  26/Feb/2008
- Configuring a Cisco 827 Router, 6130 NI-2, 6400 UAC, and Two NRPs Using PPPoA (aal5mux ppp)
  23/Nov/2007
- Configuring a Cisco 677 CPE With RFC1483 Routed to a Cisco 6400 UAC
  21/Nov/2005
- Configuring a Cisco 675 CPE With PPPoA, DHCP, NAT, and Terminating on a 6400 UAC (aal5mux ppp)
  04/Oct/2006
- Configuring a Cisco 67x CPE Terminating on a Cisco 6400 UAC With RBE
  26/Feb/2008
- Configuring a PC as a PPPoE Client to Connect to Two ISPs With a 6400 UAC
  01/Jun/2005
- Configuring PPPoE Client on the Cisco 2600 to Connect to a Non-Cisco DSL CPE
  31/May/2005
- Configuring PVC and PVP Cross Connections for the Cisco 6400 NRP/NSP
  26/Feb/2008
- Configuring Two Cisco 827 Routers (PPPoA), 6130 NI-2, Terminating on a 6400 UAC-NRP (aal5mux ppp)
  23/Nov/2007
- Configuring Two Cisco 827 Routers With RFC1483 Routing IP (encap aal5snap)
  26/Feb/2008
- PPPoA Session Termination Using Static Routes: xDSL to a Cisco 6400 UAC Using aal5ciscoppp
  09/Aug/2006
- PPPoA Session Termination Using Static Routes: xDSL to a Cisco 6400 UAC Using aal5mux
  10/Nov/2005
- PPPoA Session Termination: xDSL to 6400 UAC
  09/Aug/2006
- PPPoA Session Termination: xDSL to 6400 UAC Using aal5mux
  15/Nov/2005
- RFC1483 Bridging: xDSL to 6400 UAC
  09/Aug/2006
- TCP and UDP Small Servers
  01/Aug/2006
- Telnet Password on Cisco Router to Avoid Error Message Configuration Example
  03/Aug/2006
- Telnet, Console and AUX Port Passwords on Cisco Routers Configuration Example
  30/Jun/2008
- Understanding and Configuring VLAN Routing and Bridging on a Router Using the IRB Feature
  30/Aug/2005
- Using Network-Based Application Recognition and ACLs for Blocking the "Code Red" Worm
  02/Aug/2006

Hierarchical Navigation

Cisco 6400 Series Broadband Aggregators

Configuration Examples and TechNotes

Related Tools