AV:N/AC:L/Au:N/C:N/I:N/A:C/E:F/RL:OF/RC:C
-
The Cisco IOS IP Service Level Agreement (IP SLA) feature contains a denial of service (DoS) vulnerability. The vulnerability is triggered when malformed UDP packets are sent to a vulnerable device. The vulnerable UDP port numbers depend on the device configuration. Default ports are not used for the vulnerable UDP IP SLA operation or for the UDP responder ports.
Cisco has released software updates that address this vulnerability.
This advisory is posted at http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20110928-ipsla.
Note: The September 28, 2011, Cisco IOS Software Security Advisory bundled publication includes ten Cisco Security Advisories. Nine of the advisories address vulnerabilities in Cisco IOS Software, and one advisory addresses vulnerabilities in Cisco Unified Communications Manager. Each advisory lists the Cisco IOS Software releases that correct the vulnerability or vulnerabilities detailed in the advisory as well as the Cisco IOS Software releases that correct all vulnerabilities in the September 2011 Bundled Publication.
Individual publication links are in "Cisco Event Response: Semiannual Cisco IOS Software Security Advisory Bundled Publication" at the following link:
http://www.cisco.com/web/about/security/intelligence/Cisco_ERP_sep11.html
-
Vulnerable Products
Cisco devices that are running Cisco IOS Software are vulnerable when they are configured for IP SLA, either as responders or as originators of vulnerable IP SLA operations.
To determine the Cisco IOS Software release that is running on a Cisco product, administrators can log in to the device and issue the show version command to display the system banner. The system banner confirms that the device is running Cisco IOS Software by displaying text similar to "Cisco Internetwork Operating System Software" or "Cisco IOS Software." The image name displays in parentheses, followed by "Version" and the Cisco IOS Software release name. Other Cisco devices do not have the show version command or may provide different output.
The following example shows output from a device that runs a Cisco IOS Software image:
Router> show version Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.0(1)M1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Wed 02-Dec-09 17:17 by prod_rel_team !--- output truncated
Additional information about Cisco IOS Software release naming conventions is available in the white paper Cisco IOS and NX-OS Software Reference Guide available at: http://www.cisco.com/web/about/security/intelligence/ios-ref.html.
Products Confirmed Not Vulnerable
No other Cisco products are currently known to be affected by these vulnerabilities.
-
IP SLA is an embedded agent in Cisco IOS Software designed to measure and monitor common network performance metrics like jitter, latency (delay), and packet loss.
The vulnerability that is described in this document is triggered by malformed IP SLA packets sent to the vulnerable device and port. A vulnerable device can be an IP SLA responder or the source device of a vulnerable IP SLA operation.
This vulnerability is documented in Cisco bug ID CSCtk67073 ( registered customers only) and has been assigned Common Vulnerabilities and Exposures (CVE) ID CVE-2011-3272.
Vulnerable IP SLA Responder Configurations
A device configured either as an IP SLA general responder or a permanent IP SLA UDP responder is vulnerable.
The general responder processes IP SLA control protocol packets on UDP port 1967 and then may dynamically open vulnerable UDP ports according to the IP SLA operations requested using the control protocol. The configuration for a general responder is as follows:
ip sla responder
The IP SLA UDP permanent responder is also vulnerable. An example configuration is as follows:
ip sla responder udp-echo port 300
There is no default UDP port number for the UDP permanent responder
Alternatively, both the general responder and the permanent responder can be identified with the show ip sla responder command. The general responder is vulnerable when it has been enabled. The permanent responder is vulnerable only when it has been enabled and the "udpEcho Responder" is present. In the Following example, the general responder is not vulnerable because it has not been enabled but the permanent responder is vulnerable because it has been enabled with a UDP echo responder:
Router# show ip sla responder General IP SLA Responder on Control port 1967 General IP SLA Responder is: Disabled Permanent Port IP SLA Responder Permanent Port IP SLA Responder is: Enabled udpEcho Responder: IP Address Port 0.0.0.0 300
Vulnerable IP SLA Source Device Configurations
An IP SLA source device is a Cisco IOS device that has at least one IP SLA operation configured. To be vulnerable a probe originator needs to have at least one scheduled probe that uses either of the following IP SLA operations:
- udp-jitter probe
- udp-echo
A vulnerable IP SLA source device configuration includes all the following commands:
- An ip sla global configuration command to define an IP SLA operation
- Either a udp-echo or a udp-jitter IP SLA configuration command
- An ip sla schedule global configuration command that activates one of the probes that uses a vulnerable IP SLA operation
The following examples show a source device that is configured for IP SLA UDP echo and UDP jitter probes:
ip sla 201 udp-echo 192.168.134.21 201 ip sla schedule 201 start-time now ip sla 301 udp-jitter 192.168.134.121 122 ip sla schedule 301 start-time now
The destination UDP ports for the probes need to be configured. If the source UDP port is not configured an available port number will be used when the probe is started. A device that originates a vulnerable operation will be vulnerable on the source UDP ports of the probe and a responder will be vulnerable on the destination UDP port used for the probe.
IP SLA probes can be configured using Simple Network Management Protocol (SNMP). In that case, by default, the output of the show running-config command will not include the IP SLA probe configuration. The show ip sla configuration command can be used to verify whether a probe has been configured either by the command line or via SNMP.
Router# show ip sla configuration | include operation Type of operation to perform: udp-jitter
-
There are no workarounds for this vulnerability, but there are mitigations that can be deployed on a general IP SLA responder to reduce the exposure to this vulnerability.
General IP SLA Responder Mitigation
For devices that are configured as general responders, a mitigation is to restrict IP SLA control packets on UDP port 1967 that are addressed to the vulnerable device to permit only trusted probe originators to open UDP ports that could be exploited. This can be accomplished using techniques such as Infrastructure Access list or Control Plane Protection.
For devices configured as general responders, mitigation techniques that can be deployed on Cisco devices within the network are available in the Cisco Applied Mitigation Bulletin companion document for this advisory: http://tools.cisco.com/security/center/content/CiscoAppliedMitigationBulletin/cisco-amb-20110928-ipsla.
IP SLA Permanent Responder Mitigation
For the permanent responder, the mitigation is to filter UDP packets addressed to the configured UDP port of each permanent responder to permit packets from the IP addresses of trusted devices.
IP SLA Source Devices Mitigation
For IP SLA source devices, a mitigation is to allow only UDP packets from trusted devices (that is, devices that are the target of IP SLA operations)
-
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Technical Assistance Center (TAC) or your contracted maintenance provider for assistance.
Additionally, the Cisco IOS Software Checker is available on the Cisco Cisco Security (SIO) portal at http://tools.cisco.com/security/center/selectIOSVersion.x. It provides several features for checking which Security Advisories affect specified versions of Cisco IOS Software.
Cisco IOS Software
Each row of the following Cisco IOS Software table corresponds to a Cisco IOS Software train. If a particular train is vulnerable, the earliest releases that contain the fix are listed in the First Fixed Release For This Advisory column. The First Fixed Release for All Advisories in the September 2011 Bundled Publication column lists the earliest possible releases that correct all the published vulnerabilities in the Cisco IOS Software Security Advisory bundled publication. Cisco recommends upgrading to the latest available release, where possible.
Major Release
Availability of Repaired Releases
Affected 12.0-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 12.0-based releases
Affected 12.1-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 12.1-based releases
Affected 12.2-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 12.2-based releases
Affected 12.3-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 12.3-based releases
Affected 12.4-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 12.4-based releases
Affected 15.0-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 15.0-based releases
Affected 15.1-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
Not vulnerable
Vulnerable; contact your support organization per the instructions in the Obtaining Fixed Software section of this advisory.
Vulnerable; first fixed in Release 15.1T
Vulnerable; first fixed in Release 15.1T
Not vulnerable
15.1(4)M2; Available on 30-SEP-11
Not vulnerable
Vulnerable; contact your support organization per the instructions in the Obtaining Fixed Software section of this advisory.
15.1(2)S
Cisco IOS XE devices: Please see Cisco IOS-XE Software Availability
15.1(2)S2
15.1(3)S
Cisco IOS XE devices: Please see Cisco IOS-XE Software Availability
15.1(1)T3
15.1(2)T4
15.1(3)T2
15.1(1)T4; Available on 08-DEC-11
15.1(2)T4
15.1(3)T2
Vulnerable; first fixed in Release 15.1T
Vulnerable; first fixed in Release 15.1T
Affected 15.2-Based Releases
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
There are no affected 15.2-based releases
Cisco IOS XE Software
Cisco IOS XE Software is affected by the vulnerability disclosed in this document.
Cisco IOS XE Release
First Fixed Release
First Fixed Release for All Advisories in the September 2011 Bundled Publication
2.1.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
2.2.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
2.3.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
2.4.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
2.5.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
2.6.x
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
3.1.xS
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
3.1.xSG
Vulnerable; migrate to 3.2.0SG or later
Vulnerable; migrate to 3.2.0SG or later
3.2.xS
Vulnerable; migrate to 3.3.2S or later
Vulnerable; migrate to 3.3.2S or later
3.2.xSG
Not vulnerable
Not vulnerable
3.3.xS
3.3.0S
3.3.2S
3.4.xS
Not vulnerable
Not vulnerable
For mapping of Cisco IOS XE to Cisco IOS releases, please refer to the Cisco IOS XE 2 Release Notes, Cisco IOS XE 3S Release Notes, and Cisco IOS XE 3SG Release Notes.
-
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability described in this advisory.
This vulnerability was found during Cisco internal testing.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Revision 1.2
2011-Oct-10
Clarify malformed IP SLA packets in Details section.
Revision 1.1
2011-Oct-07
Updated show running-config command nomenclature in Details section
Revision 1.0
2011-Sep-28
Initial public release
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A stand-alone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy, and may lack important information or contain factual errors. The information in this document is intended for end-users of Cisco products.