Cisco® announces the end-of-sale and end-of-life dates for the Cisco POS/DPT Enhanced Optical Services Modules. The last day to order the Cisco POS/DPT Enhanced Optical Services Modules is August 1, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco POS/DPT Enhanced Optical Services Modules. Table 2 lists the product part numbers affected by this announcement.
Table 1. End-of-Life Milestones and Dates for the Cisco POS/DPT Enhanced Optical Services Modules
Milestone
Definition
Date
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
January 31, 2007
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
August 1, 2007
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
October 30, 2007
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
July 31, 2008
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
July 31, 2008
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
October 27, 2011
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
July 30, 2012
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product Part Number
Product Description
Replacement Product Part Number
Replacement Product Description
OSM-1OC48-POS-SI+
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-1OC48-POS-SI+=
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-IR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-1OC48-POS-SL+
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-1OC48-POS-SL+=
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-LR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-1OC48-POS-SS+
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-1OC48-POS-SS+=
Enhanced 1-port OC-48/STM-16 SONET/SDH OSM, SM-SR, w/ 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SI
2-port OC-48/STM-16 POS/DPT OSM, SM-IR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SI=
2-port OC-48/STM-16 POS/DPT OSM, SM-IR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SL
2-port OC-48/STM-16 POS/DPT OSM, SM-LR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SL=
2-port OC-48/STM-16 POS/DPT OSM, SM-LR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SS
2-port OC-48/STM-16 POS/DPT OSM, SM-SR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
OSM-2OC48/1DPT-SS=
2-port OC-48/STM-16 POS/DPT OSM, SM-SR, with 4 GE
SPA-1XOC48POS/RPR
1-port OC48/STM16 POS/RPR Shared Port Adapters
Product Migration Options
Customers are encouraged to migrate to the shared port adapters shown in Table 2.
Customers can use the Cisco Technology Migration Plan (TMP) to trade in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, go to: http://www.cisco.com/go/tradein/. The Cisco TMP application requires all users to have a Cisco.com user ID.
Customers may be able to continue to purchase the end-of-sale product through the Cisco Authorized Refurbished Equipment program. Refurbished units of the end-of-sale product are available in limited supply for sale in certain countries on a first-come, first-served basis. For information about the refurbished equipment program, go to: http://www.cisco.com/web/ordering/ciscocapital/or6/or17/order_refurbished_equipment_high_level_listing.html.
