Product Overview
Figure 1. Cisco ONS 15454 Multiservice Transport Platform M12 (12 service slots), M6 (6 service slots, bottom right), and M2 (2 service slots, top right)
Major Features and Benefits
• Scalable C-band wavelength count (40, 80, and 96) provides superior cost-growth trade-off.
• Transport of 100-Mbps to 100-Gbps wavelength services, as well as aggregated TDM, Ethernet, and storage data services, provides maximum service flexibility and bandwidth optimization.
• Multiple chassis options provide deployment flexibility and per-site customization. The 12-slot (17 slots total) M12 chassis is available with a -48 VDC power supply. The M6 chassis provides 6 available slots for traffic (8 slots total). Like the M12 chassis, it supports a multishelf configuration to extend the slot capacity of a network element. The M2 chassis provides 2 slots for traffic (3 slots total). The M2 and M6 chassis are available with modular AC and DC power supply options, and they support both ANSI and ETSI requirements.
• Industry-leading 100 Gigabit technology allows the Cisco ONS 15454 MSTP to transmit at distances up to 4500 km. The MSTP supports a single-slot 100 Gigabit CP-DQPSK transponder, enabling up to 42 x 100 Gigabit transponders in a single half-depth 42-rack-unit (42RU) rack. For 10 Gigabit services, the ONS 15454 enables density of 30 x 10 Gigabit services per M6 shelf, and up to 420 x 10 Gigabit services per rack in a back-to-back deployment.
• Efficient Gigabit Ethernet and 10 Gigabit Ethernet transport over DWDM with Ethernet Xponder service blades. The Xponder provides unprecedented flexibility to map Ethernet services directly onto a DWDM wavelength while performing a variety of Layer 1 or Layer 2 functions. This approach provides a more efficient use of available bandwidth and extraordinary Gigabit Ethernet-over-DWDM mapping and traffic policing flexibility. The capability to use G.709 encapsulation and forward error correction (FEC) on the 10 Gigabit Ethernet LAN-PHY wavelength helps ensure optimized performance and reach. Typical SONET/SDH-like operations, administration, maintenance, and provisioning (OAM&P) supports the management functions of previous SONET/SDH-type interfaces while interfacing directly to the DWDM layer. A patented protection scheme can react to failures in less than 50 ms.
• The Cisco ONS 15454 MSPP-on-a-Blade Card combines 10-Gbps add/drop multiplexer (ADM) and transport functions to consolidate many of the aggregation functions traditionally performed by the MSPP. With one blade, carriers can now aggregate OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64, and Gigabit Ethernet signals onto a single-wavelength trunk circuit. The capability to use G.709 encapsulation and FEC on the OC-192/STM-64 wavelength helps ensure optimized performances and reach, and complete OAM&P capabilities.
• The 40-Gbps Enhanced FEC Full Band Tunable CP-DQPSK Muxponder Card and 40-Gbps CP-DQPSK Full C-Band Tunable Transponder Card provide exceptional performance for 40 Gigabit transmission, allowing the Cisco ONS 15454 MSTP to transmit at distances up to 4000 km.
• Cisco ONS 15454 Any Rate Muxponder and Xponder Cards enable a wide variety of interfaces and protection capabilities in a single card. These capabilities enable a cost-effective architecture for aggregating a large variety of services over OTU-1 or OTU-2 DWDM wavelengths.
• Flexible transmission capability up to 4500 km through the use of advanced Erbium-Doped Fiber Amplifier (EDFA) amplification, joint Raman and EDFA amplification, and FEC or enhanced FEC (EFEC) technologies supports a wide range of networking applications.
• The Cisco ONS 15454 addresses low-latency deployment needs with low-latency transponder modes and low-latency Fiber Bragg Grating dispersion compensation units.
• Fully reconfigurable optical add/drop multiplexers (ROADMs) offer superior network flexibility and reduced complexity.
• Mesh and multiring topology support in the optical domain provides the ability to manage nodes facing up to 8 degrees. These capabilities allow Cisco ONS 15454 MSTP users to provide wavelength services and define virtual private DWDM networks, where a common transport infrastructure can be shared across multiple users or services.
• Single-module ROADM (SMR) solutions dramatically improve system density and flexibility. The 40-channel single-module ROADM-2 (SMR-2) includes the optical service channel (OSC) add/drop filter, pre- and booster amplifiers, and a 4 x 1 Wavelength Selective Switch WSS-based ROADM core. This unit provides a simple and effective way to support multidegree nodes of up to 4 degrees, allowing in-service upgrade from 2 to 4 degrees. A 2-degree optimized version, the SMR-1, is also available; it includes the OSC add/drop filter, a preamplifier, and a 2 x 1 WSS-based ROADM core.
• Omnidirectional and colorless support for ROADM nodes allows service creation and restoration in a fully automated way through software provisioning. This capability provides the foundation for control-plane interaction between upper layer client devices and the optical layer.
• Fully automatic node and network setup provides the capability to use the intuitive DWDM network design tool (Cisco Transport Planner) for PC-aided design, installation, commissioning, and evolution of the network.
• Multilevel service monitoring using SONET/SDH and digital-wrapper (G.709) technology provides complete monitoring and reporting of performance and quality parameters for Ethernet, storage area network (SAN), video, and TDM services.
• Network topology autodiscovery supported at the network element level allows Element Manager System (EMS)-like functions directly through the platform-embedded software, Cisco Transport Controller.
• Network- and node-level alarm correlation performed directly by the embedded network element software allows a simpler and faster reaction to fault situations by providing only the root cause of the problem to the management interface.
• The integrated Cisco Transport Controller provides for network-based, point-and-click system and services setup and management.
• Virtual transponder operation for routers (such as the Cisco CRS-3 Carrier Routing System) is equipped with a DWDM physical line interface module (PLIM), allowing end-to-end service provisioning between routers through the complete DWDM network directly from the Cisco Transport Controller.
• Software-controlled optical power management fully automates network optical power control, critical during wavelength additions, site additions, and fast transient suppression in case of a fiber cut.
• The network-level functional view gives Cisco ONS 15454 MSTP allows operators to manage and monitor optical circuits between source and destination nodes and collect all relevant data pertaining to optical power levels and performance monitoring.
• Cisco Prime™ Optical, an advanced cross-platform optical network management system (NMS), provides unified network operations and interfaces to an operations support system (OSS).
• Simple drag-and-drop user operation for network and services definition
• Optimized services and units allocation in case of network topology or traffic matrix changes for an already deployed network (delta planning)
• Support for linear, ring, multiring, and mesh network topologies
• Fully flexible network design with the ability to optimize the flexibility provided by the ROADMs (in the optical domain) and by the multirate cards (in the service and application domain)
• Alien wavelength optical interface definition to allow the design of optical networks that can reuse existing or third-party DWDM interfaces, simplifying the migration of services and reducing the initial cost of new systems
• Automatic equipment selection
• Layered graphical views of network, wavelength services, and node layout, with the option to select between a card or a functional view of the node
• Detailed port-to-port fiber-cabling table
• Bill-of-materials (BOM) output
• Network and node layout, with the option to collect and export data pertaining to power consumption, heat dissipation, and overall weight of the configuration
• Exportable configuration file, which can be used for automated node-provisioning and quick network activations
• Live network import, which allows the import of a network into Cisco Transport Planner to assist in performing network upgrades, capacity analysis, optical analysis, and troubleshooting and interface characterization
• Wavelength Utilization View, which enables users to have a pictorial view of wavelengths used and available in the network, thereby helping future planning and providing an easy view of links running out of wavelengths.
Wide Service Interface Mix
• Optical Transport Network (OTN) wavelength and aggregated services: OTU-1, OTU-2, OTU-3, OTU-4
• Data services: Private line, switched and wavelength-based, including 10BASE-T, 100BASE-T, Gigabit Ethernet, 10 Gigabit Ethernet LAN PHY and WAN PHY, 40 Gigabit Ethernet, and 100 Gigabit Ethernet
• Storage services: 1-, 2-, 4-, 8-, and 10-Gbps Fibre Channel; IBM Fiber Connection (FICON) and Enterprise Systems Connection (ESCON); ETR/CLO; and ISC-1 and ISC-3
• Video services: D1, DV6000, and high-definition television (HDTV)
• SONET/SDH wavelength and aggregated services: OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64, and OC-768/STM-256
Service Transparency
Protection Options
• Path protection: In this case it is possible to offer complete redundancy of the optical path at the network level, but no protection is offered for the unit that is originating the Working and Protect DWDM signals and is deciding between the two DWDM signals on the receive side.
This type of protection can be supported on individual wavelengths.
• Path and equipment protection: In this case it is possible to offer complete redundancy of the optical path at the network level and of the units that are originating the Working and Protect DWDM signals and deciding between the two DWDM signals on the receive side.
• Multiplex section protection: In this case it is possible to use the Cisco ONS 15454 MSTP Protection Switch Module unit to provide protection for the aggregated signal.
• Shared Ethernet protection: This protection can be supported by the Gigabit Ethernet and 10 Gigabit Ethernet Xponder units using the innovative and patented Cisco G.709 Rapid Resilient Ring (GR3) Ethernet Protection mechanism when operating in Layer 2 mode. By integrating G.709 messaging with an Ethernet VLAN management mechanism, GR3 protection provides SONET/SDH-like switching times and reliability. A recovery time of less than 50 ms can be achieved mapping Ethernet directly over DWDM.
• Optical layer restoration: The Cisco Wavelength Switched Optical Networks (WSON) control-plane architecture enhances Generalized Multiprotocol Label Switching (GMPLS) capabilities with awareness of wavelength properties and optical impairments, offering dynamic service provisioning and 1 + R or 1 + 1 + R restoration on a flexible DWDM network.
Topology Flexibility
Figure 2. Topology Flexibility, Integrated DWDM Optics, and Optical Bypass

Product Specifications
Node Configurations
• Terminal
• Hub
• Line amplifier
• OADM
• Degree-2 ROADM
• Degree-2 Single-Module ROADM
• Multidegree ROADM
• Multidegree Single-Module ROADM
• Omnidirectional and colorless functions available on ROADMs
Network Configurations
• Linear point-to-point
• Ring (multiple-hub or no hub)
• Multiring
• Mesh
Advanced Intelligent Software Features
• Cisco WSON Control Plane extending GMPLS by introducing linear and nonlinear optical impairment awareness for DWDM network
• GMPSL User Network Interface (GMPLS-UNI) signaling interface to enable dynamic management by client devices
• Network topology autodiscovery
• Point-and-click node and network setup and regulation
• Automatic network-level optical power management and monitoring
• Single management interface (single IP address) for all the shelves in a node
• Network-level alarm correlation for quick and easy troubleshooting (G.798-based)
• Data communications network (DCN) extension to provide the capacity to use any available DCN access, including data communications channel (DCC) and generic communications channel (GCC) bytes, for management of nodes
• Automatic node turn-up for installation and deployment without the use of Cisco Transport Planner parameters
• Automatic network import into Network Planning tool for ease of performing network upgrades, capacity analysis, optical analysis, and troubleshooting and interface characterization
User Interface: Cisco Transport Controller
• Integrated node and subnetwork craft GUI
• Layered graphical views: Network, wavelength, node, shelf, and card
• Network- and node-level functional view, automatically generated and aligned with equipment status for the capability to manage and collect performance-monitoring data end to end through the network between the source and the destination nodes
• User-provisionable tab views, graphics, and fonts:
– Background maps
– Color schemes
• Comprehensive wavelength circuit routing and creation
• Network autodiscovery with provisionable subnetwork domain control
• System inventory
• PC-based Java client
• Familiar browser interface
• Complete performance-monitoring support:
– 15-minute (32 entries) and 24-hour (2 entries)
– Optical layer
– SONET/SDH layer
– Ethernet and SAN statistics
– ITU-T G.709 layer (including FEC and EFEC)
– Client interface type-specific
– Threshold-crossing alerts threshold setting
Alarm Monitoring and Reporting
• Shelf LEDs: Critical, major, minor, and remote
• Card LEDs: Card failure, active/standby state, and signal fail
• Cisco Transport Controller craft interface:
– Layered graphical views with real-time alarm text and coloring: Network, wavelength, node, shelf, and card
– Multiple technology views including DWDM and SONET/SDH with MSTP integration
• Environmental alarm contacts:
– 4-alarm output contact closures (standard): Critical, major, minor, and remote
– Up to 48 provisionable alarm contacts in systems equipped with Alarm Interface Controller (AIC-I)
Network Security Features
• Four-level user control with provisionable timeout durations: Super-user, provisioning, maintenance, and retrieve
• Multiple usernames and logged-in users
• RADIUS-based authentication
• Secure Sockets Layer (SSL), Secure Shell (SSH) Protocol, and Secure HTTP (HTTPS)
Maintenance Features
• Remote software downloads and in-service, hitless activation
• Loopbacks
• Database backup and restore
• Lamp test
Timing and Synchronization
• Two external timing-source inputs (SONET/T1 and SDH/E-1)
• Line timing
• Two timing-source outputs
• Internal Stratum 3
• Synchronous status-messaging support
Additional Features
• 100-Mbps user data channel (Fast Ethernet) transported on the optical supervisory channel (OSC)
• Front only (ETSI) or front and rear access (ANSI) shelf assembly options
• A and B fully redundant and monitored DC power inputs
Carrier-Class Availability
• Delivery of better than 99,999-percent availability
• All cards hot-swappable
• Fully redundant network element processor and database
Compliance and Certifications
• Network Equipment Building Standards (NEBS) Level 3 compliance
• ITU-T and CE Mark compliance
• Operations Systems Modification of Intelligent Network Elements (OSMINE) certifications
• Storage-vendor qualification and certifications
• MEF 9 and MEF 14 certification for Gigabit Ethernet and 10 Gigabit Ethernet Xponder units
Technical Specifications
Table 1. Supported Modules
Table 2. Wavelength Interfaces Details
Table 3. C-Band Wavelength Plan
Table 4. Product Specifications
1. 19-inch mounting brackets must be ordered separately.
2. Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This timeframe refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)
Regulatory Standards Compliance
Table 5. Regulatory Standard Compliance and Agency Approvals
Table 6. Standards Applicable to Cisco ONS 15454 MSTP
Ordering Information
Table 7. Ordering Information
|
Product ID |
Description |
||||
|
Common Equipment - M12 |
|||||
|
15454-SA-HD= 15454-SA-HD-DDR3= 15454E-SA-ETSI= |
Shelf assembly, Cisco ONS 15454 Shelf assembly, Cisco ONS 15454 with Deep Door Shelf assembly, Cisco ONS 15454E for ETSI applications |
||||
|
15454-TCC2P-K9= 15454E-TCC2P-K9= |
Timing, Communications, and Control Card, Version 2 Plus (TCC2P), 15454 chassis Timing, Communications, and Control Card, Version 2 Plus (TCC2P), 15454E chassis |
||||
|
15454-TCC3-K9= 15454E-TCC3-K9= |
Timing, Communications, and Control Card, Version 3 (TCC3), I-Temp, 15454 chassis Timing, Communications, and Control Card, Version 3 (TCC3), I-Temp, 15454E chassis |
||||
|
15454-CC-FTA= 15454E-CC-FTA= |
Controlled cooling fan-tray assembly, includes fan-tray filter |
||||
|
15454E-CTP-MIC48V= |
Mechanical interface card, craft, timing, and power inputs, ETSI |
||||
|
15454E-AP-MIC48V= |
Mechanical interface card, alarm, and power inputs, ETSI |
||||
|
15454-AIR-RAMP= 15454E-AIR-RAMP= |
Air ramp (ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets |
||||
|
15454-AIC-I= 15454E-AIC-I= |
Alarm Interface Controller, international card |
||||
|
15454-BLANK= 15454E-BLANK= |
Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ANSI shelf assembly Shelf slot-filler panel, fits any slot in Cisco ONS 15454 ETSI shelf assembly |
||||
|
15454E-BLANK-FMEC= |
Shelf FMEC slot-filler panel, fits Cisco ONS 15454 ETSI shelf assembly |
||||
|
15454-MS-ISC-100T= |
Integrated 100T Ethernet switch for multishelf management |
||||
|
15454-EAP-MF= |
Mechanical frame for Ethernet adapter panel (ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets). Ships with 2x RJ-45/RJ-45 cables (0.15m) to connect MS-ISC units with the TCC2P units and with 1x RJ-45/RJ-45 cable (0.5m) to connect the MS-ISC units among themselves. |
||||
|
15454-EAP= |
Ethernet adapter panel (to be used with MS-ISC-100T to allow proper cable management) |
||||
|
15454-MEC= |
Multiple Ethernet cable to replicate the MS-ISC-100T Ethernet ports on the EAP unit |
||||
|
Common Equipment - M6 |
|||||
|
15454-M6-SA= |
6-service-slot MSTP shelf, includes M-SHIPKIT, M6-FTF and brackets for 19", 21" and 23" |
||||
|
15454-M6-FTA= 15454-M6-FTA2= |
6-service-slot MSTP chassis fan tray 6-service-slot MSTP chassis 2nd gen fan tray |
||||
|
15454-M6-LCD= |
6-service-slot MSTP chassis LCD with backup memory |
||||
|
15454-M6-ECU= |
6-service-slot MSTP chassis external cable connections |
||||
|
15454-M6-ECU2= |
6 service slot MSTP external connection unit with TOD/PPS |
||||
|
15454-M6-ECU-60= |
6 slot MSTP external connection unit with TOD/PPS with -60V rating |
||||
|
15454-M6-DC= 15454-M6-DC20= |
6-service-slot MSTP chassis 40A DC power filter 6-service-slot MSTP chassis 20A DC power filter |
||||
|
15454-M6-AC= |
6-service-slot MSTP chassis AC power supply |
||||
|
15454-M6-AC2= |
6 service slot MSTP chassis 2nd gen AC power supply |
||||
|
15454-M6-DEFL21= |
Air Deflectors for 21" ETSI cabinet installations |
||||
|
15454-M6-DEFL23= |
Air Deflectors for 23" rack installations |
||||
|
15454-M6-BRKT= |
Spare brackets for 19", 21" and 23" |
||||
|
15454-M6-PWRFLR= |
6-service-slot MSTP power filter filler card |
||||
|
15454-M6-FTF= |
6-service-slot MSTP chassis fan tray filter |
||||
|
15454-M6-DR= 15454-M6-DDR= |
6-service-slot MSTP chassis door 6-service-slot MSTP chassis deep door |
||||
|
Common Equipment - M2 |
|||||
|
15454-M2-SA= |
2-service-slot MSTP shelf, includes M-SHIPKIT, M2-FTF and brackets for 19", 21" and 23" |
||||
|
15454-M2-FTA= 15454-M2-FTA2= |
2-service-slot MSTP chassis fan tray 2-service-slot MSTP chassis 2nd gen fan tray |
||||
|
15454-M2-DC= |
2-service-slot MSTP chassis DC ANSI filter with memory |
||||
|
15454-M2-DC-E= |
2-service-slot MSTP chassis DC ETSI filter with memory |
||||
|
15454-M2-AC= |
2-service-slot MSTP chassis AC power supply with memory |
||||
|
15454-M2-DEFL21= |
Air Deflectors for 21" ETSI cabinet installations |
||||
|
15454-M2-DEFL23= |
Air Deflectors for 23" rack installations |
||||
|
15454-M2-BRKT= |
Spare brackets for 19", 21" and 23" |
||||
|
15454-M2-WM= |
2-service-slot MSTP chassis wall mount bracket |
||||
|
15454-M2-FTF= |
2-service-slot MSTP chassis air filter |
||||
|
15454-M2-DR= 15454-M2-DDR= |
2-service-slot MSTP chassis door 2-service-slot MSTP chassis deep door |
||||
|
Common Equipment - M6 and M2 |
|||||
|
15454-M-TNC-K9= |
Transport Node Controller for M2 and M6 chassis |
||||
|
15454-M-TSC-K9= |
Transport Shelf Controller for M2 and M6 chassis |
||||
|
15454-M-TNCE-K9= |
Transport Node Controller Ethernet PTP for M2, M6 Chassis |
||||
|
15454-M-TSCE-K9= |
Transport Shelf Controller Ethernet PTP for M2, M6 Chassis |
||||
|
15454-M-T-FILLER= |
Detectable control slot filler card |
||||
|
15454-M-FILLER= |
Detectable line slot filler card |
||||
|
15454-M-SHIPKIT= |
Shipkit, Cisco ONS 15454 M6 and Cisco ONS 15454 M2 |
||||
|
Cables - M6 and M2 |
Description |
Length |
Gauge |
Connector 1 |
Connector 2 |
|
15454-M-120TMGCBL(=) |
BITS IN/OUT cable for ANSI |
0.6 m |
COAX 23 AWG |
DIN 1.0/2.3 |
2 WIRE WRAP PINS |
|
15454-M2-DCCBL-LE(=) |
DC power cable for ETSI left exit |
10 m |
12 AWG |
Power D-Sub 2 poles |
none |
|
15454-M6-DCCBL-LE(=) |
DC power cable for ETSI left exit |
10 m |
8 AWG |
Power D-Sub 3 poles |
none |
|
15454-M6-DCCBL-RE(=) |
DC power cable for ETSI right exit |
10 m |
8 AWG |
Power D-Sub 3 poles |
none |
|
15454-M-ACCBL-L(=) |
AC power cable ANSI 110 Vac left exit |
3 m |
15A - 125V |
C13 |
NEMA 5-15P |
|
15454-M-ACCBL-L2(=) |
AC power cable ANSI 220 Vac left exit |
3 m |
15A - 250V |
C13 |
NEMA 6-15P |
|
15454-M-ACCBL-R(=) |
AC power cable ANSI 110 Vac right exit |
3 m |
15A - 125V |
C13 |
NEMA 5-15P |
|
15454-M-ACCBL-R2(=) |
AC power cable ANSI 220 Vac right exit |
3 m |
15A - 250V |
C13 |
NEMA 6-15P |
|
15454-M-ACL6-L(=) |
AC power cable for Data Center |
3 m |
15A - 250V |
C13 |
NEMA WD 6 L6-20P |
|
15454-M-ACL6-R(=) |
AC power cable for Data Center |
3 m |
15A - 250V |
C13 |
NEMA WD 6 L6-20P |
|
15454-M-ALMCBL(=) 15454-M-ALMCBL2(=) |
SCSI Alarm cable SCSI Alarm cable limited to 8 inputs |
20 m 20 m |
28 AWG 24 AWG |
Mini SCSI Mini SCSI |
None None |
|
15454-M-CBL-LARG(=) |
AC power cable - ARG left exit |
3 m |
10A - 250V |
C13 |
IRAM 2073 - IEC 60884-1 |
|
15454-M-CBL-LAUS(=) |
AC power cable - AUS left exit |
3 m |
10A - 250V |
C13 |
AS/NZS 3112: 2000 |
|
15454-M-CBL-L-CHI(=) |
AC power cable - China left exit |
3 m |
10A - 250V |
C13 |
GB2099.1/GB1002 |
|
15454-M-CBL-L-EU(=) |
AC power cable - EU left exit |
3 m |
10A - 250V |
C13 |
CEE 7 STANDARD SHEET VII |
|
15454-M-CBL-L-IND(=) |
AC power cable - India left exit |
3 m |
10A - 250V |
C13 |
IS 1293 |
|
15454-M-CBL-L-JPN(=) |
AC power cable - Japan left exit |
3 m |
15A - 125V |
C13 |
JIS C8303 & JIS C8306 |
|
15454-M-CBL-LKOR(=) |
AC power cable - KOR left exit |
3 m |
10A - 250V |
C13 |
K60884-01 |
|
15454-M-CBL-L-UK(=) |
AC power cable - UK left exit |
3 m |
10A - 250V |
C13 |
BS 1363/A & SS145/A |
|
15454-M-CBL-RARG(=) |
AC power cable - ARG right exit |
3 m |
10A - 250V |
C13 |
IRAM 2073 - IEC 60884-1 |
|
15454-M-CBL-RAUS(=) |
AC power cable - AUS right exit |
3 m |
10A - 250V |
C13 |
AS/NZS 3112: 2000 |
|
15454-M-CBL-R-CHI(=) |
AC power cable - China right exit |
3 m |
10A - 250V |
C13 |
GB2099.1/GB1002 |
|
15454-M-CBL-R-EU(=) |
AC power cable - EU right exit |
3 m |
10A - 250V |
C13 |
CEE 7 STANDARD SHEET VII |
|
15454-M-CBL-R-IND(=) |
AC power cable - India right exit |
3 m |
10A - 250V |
C13 |
IS 1293 |
|
15454-M-CBL-R-JPN(=) |
AC power cable - Japan right exit |
3 m |
15A - 125V |
C13 |
JIS C8303 & JIS C8306 |
|
15454-M-CBL-RKOR(=) |
AC power cable - KOR right exit |
3 m |
10A - 250V |
C13 |
K60884-01 |
|
15454-M-CBL-R-UK(=) |
AC power cable - UK right exit |
3 m |
10A - 250V |
C13 |
BS 1363/A & SS145/A |
|
15454-M-TMGCBL(=) |
BITS IN/OUT cable for ETSI |
20 m |
COAX 23 AWG |
DIN 1.0/2.3 |
none |
|
15454-M-USBCBL(=) |
USB cable for passive devices |
3 m |
28#/1P + 24#/2C + AEB |
USB "A" MALE |
USB "A" MALE |
|
Common Equipment |
|||||
|
15454-PP-64-LC= |
64-port fiber patch-panel shelf, 1 rack unit (1RU) high, LC-to-LC connectors, 32 duplex LC adapters, supports up to 8 multifiber cable assemblies (1 MPO to 8x LC), includes 2 MPO to 8x LC 2.3-meter cable assemblies (uninstalled). Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15454-PP-80-LC= |
80-port fiber patch-panel shelf, 2RU high, LC-to-LC connectors, 40 duplex LC adapters, includes 10 MPO to 8x LC 2.3-meter cable assemblies (pre-cabled). Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15454-PP-MESH-4= |
Degree-4 mesh patch panel, 2RU high, 1x LC and 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15454-PP-MESH-8= |
Degree-8 mesh patch panel, 2RU high, 1x LC and 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15454-PP-4-SMR= |
Degree-4 mesh patch panel for single-mode ROADM, 1RU high, 1x MPO adapter per direction. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15454-FBR-STRG= |
Fiber-storage shelf, supports eight 2-meter ribbon cables (8-fiber) plus 40 2-meter 2-mm fiber cables. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15216-FL-SA= |
FlexLayer shelf assembly, 4 module slots, 1 RU high, Cisco FlexLayer platform. Ships with ANSI 19-in. and 23-in. mounting brackets. |
||||
|
15216-CS-SM-Y= |
Y-cable splitter/combiner module for 2 wavelengths protection, single-mode fiber, single-width module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly |
||||
|
15216-CS-MM-Y= |
Y-cable splitter/combiner module for 2 wavelengths protection, multimode fiber, single-width module, installs in Cisco FlexLayer (15216-FL-SA=) shelf assembly |
||||
|
15454-YCBL-LC= |
Y-cable storage shelf, 2 RUs high, supports up to 8 Y-cable splitter/combiner modules. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15454-YCM-SM-LC= |
Y-cable splitter/combiner module for 1 wavelength protection, single-mode fiber, LC adapters, installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly |
||||
|
15454-YCM-MM-LC= |
Y-cable splitter/combiner module for 1 wavelength protection, multimode fiber, LC adapters, installs in Cisco Y-cable storage (15454-YCBL-LC=) shelf assembly |
||||
|
Service Interfaces1 |
|||||
|
15454-10DME-C= |
10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors |
||||
|
15454-10DMEX-C= |
10-Gbps E-FEC data muxponder card, 8x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10DME-C= leveraging on 2nd Generation Maximum Likelihood Sequence Estimation (MLSE) |
||||
|
15454-10E-L1-C= |
10-Gbps E-FEC multirate transponder card, 1x XFP-based client interface, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors |
||||
|
15454-10EX-L1-C= |
10-Gbps E-FEC multirate transponder card, 1x XFP-based client interface, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10E-L1-C= leveraging on 2nd Generation MLSE |
||||
|
15454-10GE-XP= |
10GE E-FEC Ethernet Crossponder, 2x XFP-based client interfaces, 2x XFP-based trunk interfaces |
||||
|
15454-10GE-XPE= |
10GE E-FEC Ethernet Enhanced Crossponder, 2x XFP-based client interfaces, 2x XFP-based trunk interfaces |
||||
|
15454-10ME-L1-C= |
4x OC-48/STM-16 E-FEC muxponder card, 4x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors |
||||
|
15454-10MEX-L1-C= |
4x OC-48/STM-16 E-FEC muxponder card, 4x SFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors. Extended version of 15454-10ME-L1-C= leveraging on 2nd Generation MLSE |
||||
|
15454-ADM-10G= |
10Gbps E-FEC ADM-On-A-Blade, 16x SFP-based client interfaces, 1x XFP-based interconnection interface, 2x XFP-based trunk interfaces |
||||
|
15454-GE-XP= |
GE E-FEC Ethernet Crossponder, 20x SFP-based client interfaces, 2x XFP-based trunk interfaces |
||||
|
15454-GE-XPE= |
GE E-FEC Ethernet Enhanced Crossponder, 20x SFP-based client interfaces, 2x XFP-based trunk interfaces |
||||
|
15454-OTU2-XP= |
4x OTN E-FEC Multirate Xponder, 2x XFP-based trunk/client FEC interfaces, 2x XFP-based trunk/client E-FEC interfaces |
||||
|
15454-40G-MXP-C= |
4x 10-Gbps DPSK 40-Gbps muxponder card, 4x XFP-based client interfaces, full C-band tunable on 50-GHz ITU wavelengths (Odd and Even), DWDM line with LC connectors |
||||
|
15454-40E-MXP-C= |
4x10GE/OC192/STM64/OTU2 Muxponder CP-DQPSK Extended Performance |
||||
|
15454-40ME-MXP-C= |
4x10GE/OC192/STM64/OTU2 Muxponder CP-DQPSK Metro Edge Performance |
||||
|
15454-40E-TXP-C= |
OC-768/STM-256/40GE Transponder CP-DQPSK Extended Performance |
||||
|
15454-40ME-TXP-C= |
OC-768/STM-256/40GE Transponder CP-DQPSK Metro Edge Performance |
||||
|
15454-AR-XP= |
ONS 15454 Any-Rate Xponder |
||||
|
15454-AR-XP-LIC= |
ONS 15454 Any-Rate Xponder - Software license upgradable |
||||
|
15454-AR-XPE= |
ONS 15454 Any rate Xponder Enhanced version |
||||
|
15454-AR-MXP= |
ONS 15454 Any-Rate Muxponder |
||||
|
15454-AR-MXP-LIC= |
ONS 15454 Any-Rate Muxponder - Software license upgradable |
||||
|
15454-M-100G-ME-C= |
100G OTU-4 CP-DQPSK Full C Band Tuneable LC Metro Edge |
||||
|
15454-M-100G-LC-C= |
100G OTU-4 ITU-T CP-DQPSK Full C Band Tuneable LC |
||||
|
15454-M-100GC-LIC= |
100G OTU-4 ITU-T CP-DQPSK Full C Band Tuneable LC - Licensed |
||||
|
15454-M-10X10G-LC= |
10x10G Multi rate Client Line Card |
||||
|
15454-M-10X10-LIC= |
10x10G Multi rate Client LC Licensed w/ 1 License at 10G |
||||
|
15454-M-LIC-10G= |
One Port 10G License for 100G Muxponder |
||||
|
15454-M-LIC-100G= |
100G TXP/Reg License for 100G Trunk Line card |
||||
|
15454-M-CFP-LC= |
2 x 100G CFP Line Card |
||||
|
Optical Transmission Elements |
|||||
|
15454-32-DMX= |
32-channel demultiplexer 100-GHz (for use with 32-WSS), C-band, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables |
||||
|
15454-32-WSS= |
32-channel wavelength selective switch 100-GHz, C-band, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-40-DMX-C= |
40-channel demultiplexer 100-GHz (for use with 40-WSS-C, 40-MUX-C or 40-WXC-C), C-band, Odd grid, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables |
||||
|
15454-40-DMX-CE= |
40-channel demultiplexer 100-GHz (for use with 40-WSS-CE), C-band, Even grid, MPO connectors for drop path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables |
||||
|
15454-40-MUX-C= |
40-channel multiplexer 100-GHz (for use with 40-DMX-C or 40-WXC-C), C-band, Odd grid, MPO connectors for add path, LC connector for interconnection, includes one 2m LC/LC fiber-optic cables |
||||
|
15454-40-WSS-C= |
40-channel wavelength selective switch 100GHz, C-band, Odd grid, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-40-WSS-CE= |
40-channel wavelength selective switch 100-GHz, C-band, Even grid, MPO connectors for add path, LC connectors for interconnection, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-40-WXC-C= |
40-channel wavelength cross connect 100-GHz, C-band, Odd grid, MPO connector for interconnection with Mesh Patch Panel, LC connectors for interconnection, includes one 2m LC/LC fiber-optic cable |
||||
|
15454-80-WXC-C= |
80-channel wavelength cross connect 50-GHz, C-band, Odd and Even grid, LC connectors |
||||
|
15454-WXC-LIC= |
80-channel wavelength cross connect 50-GHz, C-band, Odd and Even grid, LC connectors - 10ch Licensed Restricted |
||||
|
15454-40-SMR1-C= |
40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection and add path, includes one 2-meter LC/LC fiber-optic cable and one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, a preamplifier and a 2x1 WSS-based ROADM core into a single slot unit. |
||||
|
15454-SMR1-LIC= |
40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection and add path, includes one 2-meter LC/LC fiber-optic cable and one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, a preamplifier and a 2x1 WSS-based ROADM core into a single slot unit, 10-channel license restricted |
||||
|
15454-40-SMR2-C= |
40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection, MPO connector for interconnection with Mesh Patch Panel, includes one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, PRE and BST amplifiers and a 4x1 WSS-based ROADM core. |
||||
|
15454-SMR2-LIC= |
40-channel single-module ROADM, 100-GHz, C-band, LC connectors for interconnection, MPO connector for interconnection with Mesh Patch Panel, includes one 0-dB LC/LC loopback (to be used if DCU is not required). Combines the OSC add/drop filter, PRE and BST amplifiers and a 4x1 WSS-based ROADM core. 10-channel license restricted. |
||||
|
15216-MD-40-ODD= |
40-Channel Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15216-MD-40-EVEN= |
40-Channel Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15216-EF-40-ODD= |
40-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15216-EF-40-EVEN= |
40-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15216-MD-48-ODD= |
48-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Odd, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15216-MD-48-EVEN= |
48-Channel Exposed Faceplate Multiplexer and Demultiplexer Passive Patch Panel, 100-GHz, C-band - Even, 2RU high, 40 duplex LC add and drop ports, 3 duplex LC ports for internal and monitor connections, USB port for passive inventory. Ships with ANSI 19-in. and 23-in. and ETSI 600mm mounting brackets. |
||||
|
15454-AD-4C-xx.x= |
4-channel OADM, C-band, 100-GHz, LC connectors, includes two 2-meter LC/LC fiber-optic cables |
||||
|
15216-HD-EXT-PNL= |
Edge Mounting Bracket |
||||
|
15216-FLD-4-xx.x= |
Edge 4-Channel Bidirectional OADM Module 15xx.xx to 15xx.xx |
||||
|
15216-FLC-CWDM-8= |
Edge 8-Channel CWDM Multiplexer/Demultiplexer Module |
||||
|
15216-FLD-OSC= |
Edge Optical Service Channel Add/Drop |
||||
|
15454-OPT-AMP-17C= |
Optical amplifier, 17dBm output power, 17dB gain, can be configured as preamplifier or booster, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2-meter LC/LC fiber-optic cables |
||||
|
15454-OPT-AMP-C= |
Enhanced optical amplifier, 20dBm output power, can be configured as preamplifier or booster, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables |
||||
|
15454-OPT-BST= |
Optical booster amplifier, 17dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-OPT-BST-E= |
Optical enhanced booster amplifier, 20dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-OPT-PRE= |
Optical preamplifier, 17dBm output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one 4-dB LC/LC attenuated loopback (to be used if DCU is not required) |
||||
|
15454-OPT-RAMP-C= |
Optical Raman amplifier with embedded EDFA, 500mW total counter-propagating Raman pump power, 17dBm EDFA output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables |
||||
|
15454-OPT-RAMP-CE= |
Extended Performance Optical Raman amplifier with embedded EDFA, 500mW total counter-propagating Raman pump power, 2 pump wavelengths, 20dBm EDFA output power, C-band, 80-channel, 50-GHz compatible, LC connectors, midstage access, includes one LC/LC loopback (to be used if DCU is not required) and two 2m LC/LC fiber-optic cables |
||||
|
15454-M-RAMAN-CTP= |
High Power Counter-Propagating, 1W optical pump output power, C-band, 96 channel 50GHz Raman unit with 2 LC-LC 2m cables and 2 ES 2000 PS LC 2m cables. |
||||
|
15454-M-RAMAN-COP= |
High Power Co-Propagating, 1W optical pump output power, C-band, 96 channel 50GHz Raman unit with 2 ES 2000 PS PC 2m cables. |
||||
|
15454-OPT-EDFA-17= |
Enhanced C-band 96 channel low cost amplifier 17 dB max gain, 50 GHz compatible, LC connector, , includes two 2m LC/LC fiber-optic cables |
||||
|
15454-OPT-EDFA-24= |
Enhanced C-band 96 channel low cost amplifier 24 dB max gain, 50 GHz compatible, LC connector, , includes two 2m LC/LC fiber-optic cables |
||||
|
15454-OSC-CSM= |
Optical service channel card, integrated combiner/separator, 1510nm, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-OSCM= |
Optical service channel card, 1510-nm, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-PSM= |
Protection Switching Module, LC connectors |
||||
|
15216-DCU-SA= |
Dispersion-compensation unit shelf, two module slots, 1RU high. Ships with ANSI 19-in. and 23-in. and ETSI 600 mm mounting brackets. |
||||
|
15216-FBGDCU-<value>= |
Low Latency Fiber Bragg Grating Dispersion-compensation module, LC connectors, SMF Fiber, different lengths for C-band as part of the Cisco ONS 15216 Series. |
||||
|
15216-DCU-<value>= |
Dispersion-compensation module, LC connectors, different fiber types and lengths for C-band as part of the Cisco ONS 15216 Series. Individual values and parts are captured in the datasheet - Cisco ONS 15216 Dispersion Compensator Unit |
||||
|
15454-TDC-CC= |
Tunable Dispersion Compensation Unit Coarse Granularity, tunable from 110ps/nm to 1,650ps/nm with steps of 110ps/nm, C band, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15454-TDC-FC= |
Tunable Dispersion Compensation Unit Fine Granularity, tunable from 45ps/nm to 675ps/nm with steps of 45ps/nm, C Band, LC connectors, includes two 2m LC/LC fiber-optic cables |
||||
|
15216-ID-50= |
50 GHz/100GHz Optical Interleaver and De-interleaver Module, single-width module, installs in Cisco FlexLayer shelf assembly (15216-FL-SA) |
||||
|
15216-MD-ID-50= |
50-GHz/100-GHz Optical Interleaver and De-interleaver Module, installs in Cisco 15216-MD-40 units |
||||
|
15216-MD-48-CM= |
48 channel 50-GHz/100-GHz Optical De-interleaver with Coupler Module, installs in Cisco 15216-EF-40 and 15216-MD-48 units |
||||
|
Pluggable Optics Modules |
|||||
|
ONS-SI-155-SR-MM= |
OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, multimode, industrial temperature, LC connector |
||||
|
ONS-SI-155-I1= |
OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, single-mode, industrial temperature, LC connector |
||||
|
ONS-SI-155-L2= |
OC-3/STM-1 SFP optics module, long-reach, 1550 nm, single-mode, industrial temperature, LC connector |
||||
|
ONS-SC-155-EL= |
SFP - STM-1 Electrical, standard coaxial (75 ohm) connector |
||||
|
15454E-SFP-L.4.1= |
OC-12/STM-4 SFP optics module, intermediate-reach, 1310 nm, single-mode, LC connector |
||||
|
ONS-SI-622-I1= |
OC-12/STM-4/OC-3/STM-1 SFP optics module, intermediate-reach, 1310 nm, single-mode, industrial temperature, LC connector |
||||
|
15454E-SFP-L.16.1= |
OC-48/STM-16 SFP optics module, intermediate-reach, 1550 nm, single-mode, LC connector |
||||
|
ONS-SE-2G-S1= |
OC-48/STM-16 SFP optics module, short-reach/intra-office, 1310 nm, single-mode, LC connector |
||||
|
ONS-SI-2G-S1= |
OC-48/STM-16 SFP optics module, short-reach/intra-office, 1310 nm, single-mode, Industrial Temp, LC connector |
||||
|
ONS-SE-2G-L2= |
OC-48/STM-16 SFP optics module, long-reach/long-haul, 1550 nm, single-mode, LC connector |
||||
|
ONS-SI-2G-L2= |
OC-48/STM-16 SFP optics module, long-reach/long-haul, 1550 nm, single-mode, Industrial Temp, LC connector |
||||
|
ONS-SE-Z1= |
OC-48/STM-16/OC-12/STM-4/OC-3/STM-1 SFP optics module, 1310 nm, single-mode, LC connector |
||||
|
ONS-SC-Z3-XXXX= |
OC-48/STM-16/GE SFP optics module, CWDM, XXXX-nm, single-mode, Commercial Temp, LC connector |
||||
|
ONS-SE-200-MM= |
ESCON SFP optics module, short-reach, 1310 nm, multimode, LC connector |
||||
|
ONS-SE-G2F-LX= |
GE, Fibre Channel (1- and 2-Gbps) and HDTV SFP optics module, long-reach, 1310nm, single-mode, LC connector |
||||
|
ONS-SE-G2F-SX= |
GE and Fibre Channel (1- and 2-Gbps) SFP optics module, short-reach, 850 nm, multimode, LC connector |
||||
|
ONS-SE-GE-ZX= |
GE SFP optics module, 1000BASE-ZX interface, 1550 nm, single-mode, LC connector |
||||
|
ONS-SI-GE-ZX= |
GE SFP optics module, 1000BASE-ZX interface, 1550 nm, single-mode, Industrial Temp, LC connector |
||||
|
ONS-SE-ZE-EL= |
10/100/1000 Ethernet SFP electrical module, BASE-T interface, RJ-45 connector |
||||
|
ONS-SE-4G-SM= |
4-Gbps Fibre Channel SFP optics module, 1310 nm, single-mode, LC connector |
||||
|
ONS-SE-GE-BXU= |
GE SFP optics module, 1000BASE BX U, single fiber application - upstream, Extended Temp, 1310 nm TX and 1490 nm RX, single-mode, single LC connector |
||||
|
ONS-SE-GE-BXD= |
GE SFP optics module, 1000BASE BX D, single fiber application - downstream, Extended Temp, 1490 nm TX and 1310 nm RX, single-mode, single LC connector |
||||
|
ONS-SE-4G-MM= |
4-Gbps Fibre Channel SFP optics module, 850 nm, multimode, LC connector |
||||
|
ONS-SC-4G-xx.x= |
4-Gbps Fibre Channel SFP optics module, DWDM, 15xx.x, 100 GHz, LC connector - Commercial Temp |
||||
|
ONS-SC-2G-xx.x= |
OC-48/STM-16 SFP optics module, DWDM, 15xx.x-nm, single mode, LC connector |
||||
|
ONS-XC-10G-SR-MM= |
10 GE/10-Gbps Fibre Channel XFP optics module, short-reach, 850 nm, multimode, LC connector |
||||
|
ONS-XC-10G-S1= |
OC-192/STM-64/10 GE/10-Gbps Fibre Channel XFP optics module, short-reach, 1310 nm, single-mode, LC connector |
||||
|
ONS-XC-10G-L2= |
OC-192/STM-64 XFP optics module, long-reach, 1550 nm, single-mode, LC connector |
||||
|
ONS-XC-10G-I2= |
OC-192/STM-64 IR2/10 GE XFP optics module, intermediate-reach, 1550nm, single-mode, LC connector |
||||
|
ONS-XC-10G-xx.x= |
OC-192/STM-64/10 GE XFP optics module, DWDM, 15xx.x- nm, single-mode, LC connector |
||||
|
ONS-XC-10G-C= |
OC-192/STM-64/10 GE XFP optics module, DWDM, Full C-band Tunable, 50 GHz, single-mode, LC connector |
||||
|
ONS-XC-10G-xxxx= |
OC-192/10GE/OTU2, CWDM, xxxx nm, XFP Commercial Temp, 40 km range |
||||
|
ONS-SC-E1-T1-PW= |
SFP - E1/DS1 PDH over FE Pseudowire - Commercial Temp |
||||
|
ONS-SC-EoP1= |
SFP - FE over DS1/E1 - Commercial Temp |
||||
|
ONS-SC-EOP3= |
SFP - FE over DS3/E3 - Commercial Temp |
||||
|
ONS-SC-E3-T3-PW= |
SFP-E3/DS-3 PDH over FE Pseudowire - Commercial Temp |
||||
|
ONS-XC-8G-SM= |
8-Gbps Fibre Channel XFP SM |
||||
|
ONS-XC-8G-MM= |
8-Gbps Fibre Channel XFP MM |
||||
|
ONS-SC-OSC-ULH= |
SFP-OC3/STM1/FE Optical Service Channel SFPs ULH-Commercial Temp |
||||
|
ONS-SC-OSC-18.0= ONS-SC-HD3GV-TX= ONS-SC-HD3GV-RX= ONS-CC-100GE-LR4= |
SFP FE/OC3/STM1 OSC for RAMAN application 1518.0nm SFP - 3G HD Video Tx SFP - 3G HD Video Rx 100GE Basd-CFP - LR4 - Commercial temp |
||||
|
ONS-CC-100G-LR4= |
100G Multirate CFP - LR4 - Commercial temp |
||||
|
ONS-CC-40G-LR4= |
40G Multirate CFP- LR4 - Commercial Temp |
||||
|
ONS-CC-40G-FR= CFP-40G-SR4= |
40G Multirate CFP- FR - Commercial Temp 40GBASE-SR4 CFP Module with MPO connector |
||||
|
ONS-CXP-100G-SR10= |
CXP - 100GBASE-SR - Commercial temp |
||||
|
ONS-XC-10G-96C= ONS-SC+-10G-SR= ONS-SC+-10G-LR= ONS-SC+-10G-ER= ONS-SC+-10G-ZR= ONS-SC-+-10G-C= ONS-SC+-10G-xx.x= ONS-SC+-10GEPxx.x= ONS-SC+-10G-CUx= |
XFP - 10G 96 ch Full C Band Tuneable DWDM XFP, 50 Ghz, LC SFP+ SR - Commercial Temp - MM SFP+ LR - Commercial Temp - SM SFP+ ER - Commercial Temp - SM SFP+ ZR - Commercial Temp - SM SFP+ -10G MR, Full C Band Tuneable DWDM SFP+, 50 Ghz, LC 10G MR, SFP+ 15xx.xnm, 100 GHz, LC - SM 10G MR, Edge Performance SFP+ 15xx.x, 100 GHz, LC - SM 10GBASE-CU SFP+ Active Cable 1m, 3m, 5m and 7m lengths |
||||
|
Cable Assemblies |
|||||
|
15454-MPO-MPO-2= |
Multi-fiber patchcord - MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 2.0 mm |
||||
|
15454-MPO-XMPO-2= |
Multi-fiber patchcord - MPO 8-fiber ribbon to MPO 8-fiber ribbon crossed, single mode, 2.0m, for use with SMR-2 units for Degree-2 ROADM Node configurations (no PP-4-SMR required) |
||||
|
15454-MPO-MPO-4= |
Multi-fiber patchcord - MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 4.0m |
||||
|
15454-MPO-MPO-6= |
Multi-fiber patchcord - MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 6.0m |
||||
|
15454-MPO-MPO-8= |
Multi-fiber patchcord - MPO 8-fiber ribbon to MPO 8-fiber ribbon, single mode, 8.0m |
||||
|
15454-MPO-8LC-2= |
Cable assembly, MPO 8-fiber ribbon to 8x LC/PC, single mode, 2.3m |
||||
|
15454-LC-LC-2= |
Cable assembly, LC/PC-to-LC/PC, single-mode, 2.0m, 2 mm jacket |
||||
|
15216-LC-LC-5= |
Cable assembly, LC/PC-to-LC/PC, single-mode, 4.0m, 2mm jacket |
||||
|
15216-LC-LC-10= |
Cable assembly, LC/PC-to-LC/PC, single-mode, 6.0m, 2mm jacket |
||||
|
15216-LC-LC-20= |
Cable assembly, LC/PC-to-LC/PC, single-mode, 8.0m, 2mm jacket |
||||
|
15216-LC-LC-MM-2= |
Cable assembly, LC/PC-to-LC/PC, multimode, 2.0m, 2mm jacket |
||||
|
15216-LC-LC-MM-5= |
Cable assembly, LC/PC-to-LC/PC, multimode, 5.0m, 2mm jacket |
||||
|
15216-LC-SC-5= |
Cable assembly, LC/PC-to-SC/UPC, single-mode, 4.0m, 2mm jacket |
||||
|
15216-LC-SC-10= |
Cable assembly, LC/PC-to-SC/UPC, single-mode, 6.0m, 2mm jacket |
||||
|
15216-LC-SC-20= |
Cable assembly, LC/PC-to-SC/UPC, single-mode, 8.0m, 2mm jacket |
||||
|
15454-MPO-8LC-4= |
Multi-fiber patchcord - MPO to 8xLC - 4m |
||||
|
15454-MPO-8LC-6= |
Multi-fiber patchcord - MPO to 8xLC - 6m |
||||
|
15454-MPO-8LC-8= |
Multi-fiber patchcord - MPO to 8xLC - 8m |
||||
|
ONS-CCC-100G-5= |
CXP-CFP MPO cable, 5m long |
||||
|
ONS-CCC-100G-10= |
CXP-CFP MPO cable, 10m long |
||||
|
ONS-CCC-100G-20= |
CXP-CFP MPO cable, 20m long |
||||
|
Software and User Documentation |
|||||
|
SF15454W-R9.6.0K9 |
15454 ANSI MSTP Rel. 9.6.0 SW, Pre-loaded on TCC2P or TCC3 |
||||
|
SF15454M-R9.6.0K9 |
15454 ANSI MSTP R9.6.0 SW, Pre-loaded on TCC3, TNC/E, TSC/E |
||||
|
15454-LIC-9.6.0K9 |
15454 ANSI ETSI MSTP Upgrade License for 9.6.0, Right To Use |
||||
|
15454-R9.6.0SWK9 |
15454 ANSI ETSI MSTP Rel. 9.6.0 Pkgs., DVD, RTU License |
||||
|
15454-R9.6.0SWK9= |
15454 ANSI ETSI MSTP Rel. 9.6.0 Pkgs., DVD, RTU License |
||||
|
SF15454WC-R9.6.0K9 |
15454 ANSI MSTP Rel. 9.6.0 SW-WSON, Pre-loaded on TCC2P-TCC3 |
||||
|
SF15454MC-R9.6.0K9 |
15454 ANSI MSTP R9.6.0SW-WSON,Preload TCC3,TNC,TNCE,TSC,TSCE |
||||
|
15454C-LIC-9.6.0K9 |
15454 ANSI ETSI MSTP-WSON Upgrade Lic 9.6.0, Right To Use |
||||
|
15454C-R9.6.0SWK9 |
15454 ANSI ETSI MSTP-WSON Rel. 9.6.0 Pkgs,DVD,RTU License |
||||
|
15454C-R9.6.0SWK9= |
15454 ANSI ETSI MSTP-WSON Rel 9.6.0 Pkgs,DVD, RTU License |
||||
|
15454-DOC9.6.0CD= |
15454 ANSI ETSI MSTP Sys. Doc. Rel. 9.6.0 English, CD |
||||
|
SF15454WE-R9.6.0K9 |
15454 ETSI MSTP Rel. 9.6.0 SW, Pre-loaded on TCC2P or TCC3 |
||||
|
SF15454ME-R9.6.0K9 |
15454 ETSI MSTP R9.6.0 SW, Pre-loaded on TCC3, TNC/E, TSC/E |
||||
|
SF15454WECR9.6.0K9 |
15454 ETSI MSTP Rel. 9.6.0 SW-WSON, Preload on TCC2P,TCC3 |
||||
|
SF15454MECR9.6.0K9 |
15454 ETSI MSTP R9.6.0SW-WSON,Preload TCC3,TNC,TNCE,TSC,TSCE |
||||
|
1 Wavelength plan is outlined in Tables 3 and 4 in this document. Cisco online lead-time tool is available for determining the lead time of individual wavelengths, if different.
|
Warranty
• Hardware warranty duration: Five (5) years
• Software warranty duration: One (1) year
• Hardware replacement, repair, or refund procedure: Cisco or our service center will use commercially reasonable efforts to ship a replacement part for delivery within fifteen (15) working days after receipt of the defective product at the Cisco site. Actual delivery times of replacement products may vary depending on customer location.
Service and Support
For More Information


