This Product Bulletin describes the content and delivery information concerning Cisco IOS(TM) software release 12.2(23)SW. The features delivered with this release will ultimately be incorporated into the 12.2S release however 12.2(23)SW represents a release vehicle that provides these features sooner. For more information about the Cisco IOS software release process, please see Product Bulletin #537.
Based upon open industry standards, Cisco's IP Transfer Point (ITP) product is designed for transporting SS7 traffic over IP (SS7oIP) networks. It's design provides significant cost efficiencies and scalability enhancements over legacy SS7 networks.
Using the IETF's M2PA and SCTP protocols, the initial release of the ITP product provided the base functionality to offload SS7 traffic to IP. Subsequent releases provided the full functionality found in typical legacy signaling transfer point (STP) nodes, such as global title translation (GTT), gateway screening and ISUP transport. In addition, support for SS7 high speed links (HSL) was added.
In subsequent releases, support was added for the M3UA and SUA protocols which provide signaling gateway functionality between legacy SS7 network and IP-enabled signaling end points (SEP) nodes. Further releases added the ability to function as a MAP-layer gateway for performing GSM SIM authentication/authorization in conjunction with Cisco's Public WLAN solution architecture as well as advanced SMS routing. Please refer to the product data sheet and white-papers for detailed product features and specifications.
The diagram below displays Cisco 12.2(23)SW release functionality relative to the 12.2 release. This diagram also identifies the recommended longer term migration path.
New Features in Cisco IOS Release 12.2(23)SW
The release of 12.2(23)SW contains the following new product features:
Table 1. Cisco IOS Release 12.2(23)SW Features
RSP Non-Stop Operation (NSO)
For additional details regarding the ITP product, please refer to:
Any ED release of software should be utilized first in a test network before being deployed in a production network.
Operating in a pure TDM mode, the ITP provides compelling cost efficiencies and investment protection as an alternative to adding SS7 capacity via the legacy STP approach. Another option enabled by the ITP is the use of IETF protocols for transporting SS7 over IP. In this case, SS7oIP frees up link capacity on legacy equipment while maintaining stringent levels of reliability and stability that are characteristic of SS7 protocols. SS7oIP will relieve the signaling network from the overwhelming message volume placed on the wireless operators SS7 network in a cost-efficient manner.
The ITP roadmap provides a migration path to converge today's SS7 and IP networks that is comfortable for the most conservative mobile operator. Moreover, mobile data services require a fundamental shift from legacy mobile core networks to high capacity, high-speed IP networks. The transition to SS7oIP will allow for rapid deployment of emerging IP-based intelligent network applications and services.
The strategic value of ITP is to offer a migration path to an all IP-core network. This systematic approach introduces achievable milestones that utilize existing investments while eliminating further capitol expenditures in legacy equipment and facilities.
The Cisco ITP is based on Cisco's native Cisco IOS Software that resides on proven Cisco high-performance router platforms. Three critical differentiating factors include:
• The Cisco ITP offers high-performance routing with state-of-the-art routing protocols, algorithms, and features (for example, quality of service [QoS]). This performance applies to both IP and Signaling System 7 (SS7) packet throughput. This approach enables revenue-generating IP-based applications by deploying Internet Engineering Task Force (IETF) SS7oIP standards.
• The Cisco ITP is a single device that takes advantage of the economies of scale across the breath of IP platforms, a single network management perspective, space occupancy, power demands, and staffing/training.
• The standards (Signaling Transport [Sigtran])-based offering has great synergy with voice-over -IP (VoIP) solutions that require cost-efficient and high-bandwidth transport of signaling of data in mobile or Public Switched Telephone Network (PSTN) VoIP networks.
Cisco IOS software release 12.2(23)SW follows the standard Cisco support policy as indicated in the following link: