Table Of Contents
Numerics - A - B - C - D - E - F - G - H - I - L - M - N - P - R - S - T - U - V - W -
Index
Numerics
12.2(13)JA and 12.2(15)JA firmware, discovery of access points 1-21
A
AAA server
Cisco ACS, ports used by 1-2
fault descriptions 2-16
named displayed as %hostname% 1-22
using AP 1100 or AP 1210 as AAA server 1-16
access point
accessing through WLSE, troubleshooting 1-5
AP web page, accessing 1-5
fault descriptions 2-1
interface
adding, results of 1-16
removing, results of 1-16
not discovered 1-20
reports, VLAN information in 1-35
ACS Failed Login Report link, recreating 1-50
Administration tab
FAQs 1-48
troubleshooting 1-49
AP 1100, using as AAA server 1-16
AP 1210, using as AAA server 1-16
B
backing up and restoring WLSE configuration
restoring backups from beta to released not allowed 1-48
Windows 2000 or XP server 1-50
beta software, restoring backups and upgrading software not allowed 1-48
booting, WLSE 1-4, 1-8
browser
cannot connect to WLSE 1-7
IE, installing software updates 1-50
Mozilla browser and Location Manager 1-48
pop-up blocker usage 1-10
C
CDP
discovery without using 1-15
seed, invalid 1-15
client
inventory, troubleshooting 1-22
reports 1-34
community string
with iee802dot11 view 1-20
configuration
auto-configuration 1-25
FAQs 1-23
IOS template job failures 1-26
job history, retention of 1-24
protocols used for jobs 1-24
startup template, changes to 1-25
Telnet/SSH credentials not valid 1-27
troubleshooting 1-25
updates, undoing 1-24
WEP key settings 1-24
connecting to WLSE
using a console 1-10
using Telnet 1-9
console, connecting to WLSE 1-10
D
database
checking database status 1-48
date and time
incorrect 1-8
device name, updates to 1-15
device name format
device tree not updated 1-21
name not updated after moving device to managed 1-21
devices
type of identifier used in displays 1-3
Devices tab
FAQs 1-15
troubleshooting 1-17
discovery
APs running 12.2(13)JA or 12.2(15)JA 1-21
AP with iee802dot11 view not discovered 1-20
devices discovered, but not displayed 1-17
Misconfigured Devices group 1-18
port used for 1-2
seed devices 1-15
SNMP Authorization Exception in discovery log 1-19
time discrepancy in jobs 1-18
troubleshooting 1-17
without CDP 1-15
DNS
port for IOS AP configuration 1-2
dot11 mib fault
description of 2-15
troubleshooting 1-18
duplicate IP address 1-16
E
EAP-FAST server
port for AP 1100 or AP 1210 1-3
F
FAQs
Administration 1-48
configuration 1-23
devices 1-15
faults 1-11
firmware 1-27
general 1-1
radio manager 1-36
reports 1-33
faults
AAA server fault descriptions 2-16
access point fault descriptions 2-1
acknowledging 1-11
clearing 1-11
descriptions of 2-1
email of 1-13
FAQs 1-11
MIB file 1-11
no display 1-13
router fault description 2-22
switch fault descriptions 2-21
troubleshooting 1-12
firmware
connectivity failure 1-32
cryptography permissions, message about 1-31
email fails to arrive 1-29
FAQs 1-27
images
transfer, ports used for 1-2
job logs 1-28
job not verified 1-30
number of devices in jobs 1-28
slow links 1-31
SNMP job fails 1-30
some devices not updated 1-30
Telnet/SSH credentials not valid 1-32
time discrepancy in jobs 1-29
troubleshooting 1-27
FTP
port for IOS AP configuration 1-2
G
groups
Misconfigured Devices group 1-18
H
hostname
displaying devices by hostname 1-3
HTTP
port for VxWorks access point configuration 1-2
WLSE Web port for 1-3
HTTPS
port used for 1-3
I
iee802dot11 view 1-20
interference, detecting 1-37
Internal Server Error message in redundant WLSEs 1-10
inventory
effects on traffic and performance 1-22
extra inventories 1-16
FAQs 1-15
length of time required 1-22
port used for 1-2
IP address, duplicate 1-16
L
LEAP server
port for AP 1100 or AP 1210 1-2
Location Manager
viewing with Mozilla browser 1-48
logging in
cannot log in 1-5
cannot log in as system administrator 1-6
failure of authentication source 1-49
password created in CLI 1-50
M
Misconfigured Devices folder
devices placed in 1-21
Misconfigured Devices system group
moving devices from 1-18
Mozilla browser, viewing Location Manager 1-48
N
name format, device names 1-21
network
connection failure 1-6
Network Address Translation (NAT), not supported 1-2
P
passwords, loss of 1-6
performance
problems caused by frequent client inventory 1-22
pop-up blockers, do not use 1-10
pre-release software, restoring backups and upgrading software not allowed 1-48
protocols
SSH, disabling 1-3
Telnet, enabling 1-2
used for configuration jobs 1-24
R
radio manager
Assisted Site Survey
client walkabout, skipping 1-45
configuration, not updated 1-47
configuration, results of 1-46
Constraints and Goals, calculations of 1-46
devices in red 1-44
device tree 1-44
job, failure of 1-45
Last Scan Time Field 1-45
Location Data fields 1-45
missing building or floor nodes 1-44
multiple channels, selecting 1-46
Next button disabled 1-45, 1-46
radio scan slow 1-45
Recall button 1-45
Use Old Radio Scan Data disabled 1-45
configuring APs 1-36
data collection 1-36
FAQs 1-36
interference detection 1-37
inventories run by 1-16
job names 1-37
rogue AP detection 1-36
scanning-only APs 1-37
troubleshooting 1-41
RADIUS
port for WLCCP authentication 1-2
RADIUS server
ports for 1-2
redundancy
Internal Server Error message 1-10
special procedures 1-48
reports
ACS Failed Login Report link, recreating 1-50
blank fields in 1-34
client reports, 0 values in 1-34
FAQs 1-33
not real-time 1-33
troubleshooting 1-33
VLAN information missing 1-35
repository
port for 1-2
rogue APs, detecting 1-36
routers, fault message for 2-22
S
search, for devices
no results yielded 1-5
security
authentication (WLSE)
failure of authentication source 1-49
troubleshooting 1-49
seed
invalid 1-15
setup program
incorrect entry 1-5
network connection fails 1-6
SMTP
port for fault notification 1-2
SNMP
port for 1-2
SNMPTRAP
port for fault notification 1-2
software, on WLSE
repository
port for 1-2
updates
CiscoWorks 1105 1-4
Internet Explorer, problems using 1-50
SSH
disabling 1-3
port for IOS AP configuration 1-2
switches, fault descriptions 2-21
sysContact information, updates to 1-15
sysLocation information
updates to 1-15
syslog
port for 1-2
T
TCP ports used by WLSE 1-2
Telnet
connecting to WLSE 1-9
enabling 1-2
port for IOS AP configuration 1-2
TFTP
ports used for firmware upgrade 1-3
time
incorrect 1-8
traps
definition file 1-11
not forwarded 1-11
type of 1-11
troubleshooting
administration 1-49
configuration 1-25
devices 1-17
faults 1-12
firmware 1-29
radio manager 1-41
reports 1-33
U
UDP ports used by WLSE 1-2
upgrading WLSE software
upgrade from beta to released not allowed 1-48
users
authentication, external 1-49
authentication server failure 1-49
external authentication server 1-49
not listed in UI 1-49
password created in CLI not accepted 1-50
simultaneous access to access points 1-2
V
VLANs
in reports 1-35
W
WDS
WLCCP
port for 1-3
WHISK port 1-2
WLCCP
port for 1-2
WLSE 1105, 2.9 software not supported on 1-4