Feedback
Table Of Contents
A - B - C - D - F - G - H - I - L - M - N - P - R - S - T - U - V - W -
Index
A
AAA server
Cisco ACS, ports used by 1-3
fault descriptions 2-24
access point
accessing through WLSE, troubleshooting 1-6
AP web page, accessing 1-6
fault descriptions 2-2
interface
adding, results of 1-17
removing, results of 1-17
reports, VLAN information in 1-41
ACS Failed Login Report link, recreating 1-59
Administration tab
FAQs 1-56
troubleshooting 1-57
B
backing up and restoring WLSE configuration
Windows 2000 or XP server 1-58
browser
cannot connect to WLSE 1-10
IE, installing software updates 1-58
C
CDP
discovery without using 1-17
seed, invalid 1-17
client
inventory, troubleshooting 1-23
reports 1-38
configuration
auto-configuration 1-27
FAQs 1-24
IOS template job failures 1-28
job history, retention of 1-25
protocols used for jobs 1-26
startup template, changes to 1-27
Telnet/SSH credentials not valid 1-29
troubleshooting 1-28
updates, undoing 1-25
WEP key settings 1-25
D
database
checking database status 1-56
date and time
incorrect 1-11
device name, updates to 1-17
Devices tab
FAQs 1-16
troubleshooting 1-18
discovery
devices discovered, but not displayed 1-18
Misconfigured Devices group 1-19
port used for 1-3
seed devices 1-17
SNMP Authorization Exception in discovery log 1-21
time discrepancy in jobs 1-19
troubleshooting 1-18
without CDP 1-17
DNS
port for IOS AP configuration 1-3
dot11 mib fault
description of 2-24
troubleshooting 1-19
F
FAQs
Administration 1-56
configuration 1-24
devices 1-16
faults 1-14
firmware 1-29
general 1-2
radio manager 1-41
reports 1-37
faults
AAA server fault descriptions 2-24
access point fault descriptions 2-2
acknowledging 1-14
clearing 1-14
descriptions of 2-1
email of 1-16
FAQs 1-14
MIB file 1-15
no display 1-16
router fault description 2-32
switch fault descriptions 2-29
troubleshooting 1-15
firmware
connectivity failure 1-36
cryptography permissions, message about 1-35
email fails to arrive 1-33
FAQs 1-29
images
transfer, ports used for 1-3
job logs 1-30
job not verified 1-34
number of devices in jobs 1-31
slow links 1-35
SNMP job fails 1-34
some devices not updated 1-33
Telnet/SSH credentials not valid 1-36
time discrepancy in jobs 1-32
troubleshooting 1-29
FTP
port for IOS AP configuration 1-3
G
groups
Misconfigured Devices group 1-19
H
HTTP
port for VxWorks access point configuration 1-3
WLSE Web port for 1-4
HTTPS
port used for 1-4
I
interference, detecting 1-45
inventory
effects on traffic and performance 1-23
extra inventories 1-17
FAQs 1-17
length of time required 1-23
port used for 1-3
L
logging in
cannot log in 1-6
cannot log in as system administrator 1-7
failure of authentication source 1-57
password created in CLI 1-58
M
Misconfigured Devices system group
moving devices from 1-19
N
network
connection failure 1-8
Network Address Translation (NAT), not supported 1-2
P
passwords, loss of 1-7
performance
problems caused by frequent client inventory 1-23
pop-up windows blocked 1-13
ports used by the WLSE 1-2
protocols
SSH, disabling 1-4
Telnet, enabling 1-4
used for configuration jobs 1-26
R
radio manager
Assisted Site Survey
client walkabout, skipping 1-52
configuration, not updated 1-55
configuration, results of 1-53
Constraints and Goals, calculations of 1-53
devices in red 1-51
device tree 1-51
job, failure of 1-52
Last Scan Time Field 1-52
Location Data fields 1-53
missing building or floor nodes 1-50
multiple channels, selecting 1-53
Next button disabled 1-51, 1-52, 1-54
radio scan slow 1-52
Recall button 1-52
Use Old Radio Scan Data disabled 1-51
configuration 1-42
data collection 1-43
FAQs 1-41
interference detection 1-45
inventories run by 1-17
radio parameters, generating 1-46
rogue AP detection 1-43
scanning-only APs 1-46
troubleshooting 1-46
radio manger
job names 1-46
RADIUS
port for WLCCP authentication 1-3
RADIUS server
ports for 1-3
recovery CD, booting from 1-14
reports
ACS Failed Login Report link, recreating 1-59
blank fields in 1-38
client reports, 0 values in 1-38
FAQs 1-37
not real-time 1-37
troubleshooting 1-37
VLAN information missing 1-41
repository
port for 1-3
rogue APs, detecting 1-43
routers, fault message for 2-32
S
scanning-only APs 1-46
screens not refreshed 1-13
search, for devices
no results yielded 1-6
security
authentication (WLSE)
failure of authentication source 1-57
troubleshooting 1-57
seed
invalid 1-17
setup program
incorrect entry 1-6
network connection fails 1-8
SMTP
port for fault notification 1-3
SNMP
port for 1-3
SNMPTRAP
port for fault notification 1-3
software, on WLSE
repository
port for 1-3
updates
Internet Explorer, problems using 1-58
SSH
disabling 1-4
port for IOS AP configuration 1-3
switches, fault descriptions 2-29
sysContact information, updates to 1-17
sysLocation information
updates to 1-17
syslog
port for 1-3
T
TCP ports used by WLSE 1-3
Telnet
connecting to WLSE 1-12
enabling 1-4
port for IOS AP configuration 1-3
TFTP
ports used for firmware upgrade 1-4
time
incorrect 1-11
traps
definition file 1-15
not forwarded 1-15
type of 1-14
troubleshooting
administration 1-57
configuration 1-28
devices 1-18
faults 1-15
firmware 1-31
radio manager 1-46
reports 1-37
U
UDP ports used by WLSE 1-3
users
authentication failure 1-57
not listed in UI 1-57
password created in CLI not accepted 1-58
simultaneous access to access points 1-2
V
VLANs
in reports 1-41
W
WDS
WLCCP
port for 1-3
WHISK port 1-3
WLCCP
port for 1-3