Table Of Contents
Numerics - A - B - C - D - E - F - G - H - I - J - L - M - N - P - Q - R - S - T - U - V - W - X -
Index
Numerics
11a radio (non-IOS), configuring 4-175
advanced 4-185
data encryption 4-195
filters 4-179
hardware 4-180
identification 4-176
module service sets 4-199
primary module service set 4-204
QoS 4-206
searched channels 4-192
11b radio (non-IOS), configuring 4-157
advanced 4-167
filters 4-160
hardware 4-161
identification 4-158
searched channels 4-173
802.11a radio (IOS), configuring 4-19
802.11b radio (IOS), configuring 4-11
A
AAA
ACS failed login report 8-48
definition GL-1
server
adding 3-37
deleting 3-37
setting up 3-25
services supported 3-38
access point
accessing through WLSE, troubleshooting 10-4
AP and bridge connected to router report, displaying 6-68
AP and bridge connected to switch report, displaying 6-66
AP associations report, displaying 6-48
channel loading report (11b) 6-11
configured radio parameters report (11b) 6-9
configuring 4-1
converting from non-IOS to IOS 5-35
definition GL-1
detailed report, displaying 6-43
Ethernet transmission statistics, displaying 6-79
Ethertype protocol filters report, displaying 6-51
faults, displaying 2-6
fault thresholds, setting 2-18
firmware, updating 5-5
firmware versions, support for 8-38
group client association report, displaying 6-22
group performance report
Ethernet utilization, displaying 6-74
RF utilization, displaying 6-73
group policy report, displaying 6-38
group security report, displaying 6-26
group SSID report, displaying 6-29
group VLAN report, displaying 6-32
hot standby report, displaying 6-64
HTTP username and password, specifying 3-32
interface
adding, results of 10-15
removing, results of 10-15
IOS, converting to 5-20
IOS reports 6-21
IP port filters report, displaying 6-53
IP protocol filters report, displaying 6-52
limitation on number of 3-80
non-IOS reports 6-21
path loss between managed APs report (11b) 6-10
performance graph, displaying 6-80
performance table, displaying 6-81
per VLAN client (group) report, displaying 6-35
per VLAN client (individual) report, displaying 6-62
policy report, displaying 6-55
policy settings 2-18
QoS report, displaying 6-56
radio monitoring 7-6
radio scans 7-9
changing job choices 7-19
checking status 7-16
copying 7-21
creating 7-11
deleting 7-20
filtering 7-18
naming 7-12
overview 7-9
refresh job list 7-23
running 7-11
scheduling 7-14
stopping 7-20
viewing run log 7-21
RF transmission statistics, displaying 6-78
setting up
IOS 3-8
non-IOS 3-6
SSH passwords, specifying 3-33
SSID report, displaying 6-58
summary report, displaying 6-40
system-defined groups for 3-98
Telnet passwords, specifying 3-33
template, creating 4-253
top n busiest clients, displaying 6-82
top n client bit error rate report, displaying 6-85
top n client MIC error rate report, displaying 6-84
top n number of associations report, displaying 6-75
top n percentage errors report, displaying 6-77
VLAN report, displaying 6-60
WDS, configuring for 3-37
wireless services, configuring for 4-95
accounting (non-IOS), configuring 4-238
ACS Failed Login report 8-49
address filters, configuring 4-110
admin access
(IOS) setting 4-26
local (non-IOS), setting 4-209
advanced
associations (non-IOS), configuring 4-142
security (IOS), configuring 4-46
settings, Ethernet port (non-IOS) 4-154
aggregation data
parameters for 3-90
understanding 3-90
aggregation intervals
about 3-90
parameters for 3-90
resetting 3-87
ANI
definition GL-1
log, displaying B-51
AP Ethertype protocol filters report, displaying 6-51
AP IP port filters report, displaying 6-53
AP IP protocol filters report, displaying 6-52
AP policy report, displaying 6-55
AP QoS report, displaying 6-56
AP SSID report, displaying 6-58
AP summary report, displaying 6-40
AP usage report, displaying 6-70
AP VLAN report, displaying 6-60
archives
managing, configuration 4-261
ARP cache
configuring
IOS template 4-90
assisted configuration 7-60
assisted site survey wizard 7-55
associations (non IOS), setting up
address filters 4-110
Ethertype filters 4-112
associations (non-IOS), setting up
advanced 4-142
DSCP to CoS 4-148
IP port filters 4-120
IP protocol filters 4-116
policy groups 4-124
port assignments 4-147
primary service set 4-139
quality of service 4-133
service sets 4-134
VLANs 4-126
audience for this document xix
authentication
displaying B-52
enabling B-17
modules supported 8-16
overview 8-16
auto-managed configuration 4-306
assigning 4-306
options for email 4-308
auto-managing devices 3-65
automatic configurations, creating 4-300
B
backing up and restoring WLSE configuration
backing up
using CLI commands 9-7
using Web interface 8-24
backup and restore log 8-4
backup CLI command B-18
backupconfig CLI command B-19
backup location, configuration
using the CLI 9-6
backup location, configuring
on Windows server 8-24
using the Web interface 8-22
listbackup CLI command B-35
restore CLI command B-48
restoring
using the CLI 9-7
using Web interface 8-26
restoring data from one WLSE to another 9-10
show backupconfig CLI command B-53
troubleshooting
Windows 2000 or Windows XP server 10-41
backup command B-18
backupconfig command B-19
basic template, configuring
IOS template 4-4
non-IOS template 4-102
booting, WLSE
boot messages, displaying B-53
from the maintenance image 9-20
from Web interface 8-5
reload command B-42
troubleshooting 10-9
bridge
AP and bridge connected to router report, displaying 6-68
AP and bridge connected to switch report, displaying 6-66
AP associations report, displaying 6-48
configuring 4-1
definition GL-2
detailed report, displaying 6-43
Ethernet transmission statistics 6-79
firmware, updating 5-5
group client association report, displaying 6-22
group performance report
Ethernet utilization, displaying 6-74
RF utilization, displaying 6-73
group policy report, displaying 6-38
group security report, displaying 6-26
group SSID report, displaying 6-29
group VLAN report, displaying 6-32
limitation on number of 3-80
performance graph, displaying 6-80
per VLAN client (group) report, displaying 6-35
per VLAN client (individual) report, displaying 6-62
RF transmission statistics, displaying 6-78
setting up 3-6
template, creating 4-253
top n number associations report, displaying 6-75
top n percentage errors report, displaying 6-77
browser
configuring 1-3
date and time display 1-8
supported browsers 1-3
troubleshooting
cannot connect to WLSE 10-7
IE, installing software updates 10-40
building, adding to Location Manager 7-47
C
cautions
conversion from non-IOS to IOS 5-35
erase config command B-24
losing data
jobs, configuration 4-271
jobs, firmware 5-16
reload command B-42
shutdown command, failure to run B-73
significance of xx
CDP (Cisco Discovery Protocol)
alternatives to 3-46
configuring
displaying configuration B-55
template (IOS) 4-60
template (non-IOS) 4-230
definition GL-2
enabling on devices 3-5
enabling on WLSE B-20
individual device seeding 3-46
neighbors of WLSE, displaying B-55
understanding 3-44
cdp command B-20
CDP distance
definition of GL-2
specifying 3-58
channel color key 7-41
channel loading report (11b), displaying 6-11
character set, allowable A-1
Cisco Access Registrar (CAR) 3-25
CiscoSecure ACS Server, configuring 3-25
CiscoWorks server
exporting devices to 3-94
importing devices from
procedure for 3-61
understanding 3-51
linking to CiscoWorks server 8-48
CLI
access, configuring 8-42
command history feature B-3
command privileges B-2
commands B-1
command summary (table) B-4
conventions B-2
definition GL-2
help for commands B-3
maintenance image commands B-78
erase config B-78
fsck B-79
reload B-79
Privilege Level 0 commands B-10
exit B-10
ping B-10
show clock B-11
show domain-name B-12
show interfaces B-13
show process B-14
show version B-15
traceroute B-15
Privilege Level 15 commands B-17
auth B-17
backup B-18
backupconfig B-19
cdp B-20
clock B-21
dumptcp B-23
erase config B-24
firewall B-25
gethostbyname B-26
hostname B-27
import B-27
interface B-31
ip domain-name B-33
ip name-server B-33
listbackup B-35
mail B-35
mailcntrl clear B-36
mailcntrl list B-37
mailroute B-37
mkcert B-38
nslookup B-40
ntp server B-40
reload B-42
restore B-48
route B-49
services B-49
show auth-cli B-52
show auth-http B-52
show backupconfig B-53
show bootlog B-53
show cdp-neighbor B-55
show cdp-run B-55
show config B-57
show import B-60
show route B-64
show ssh-version B-66
show syslog B-67
show tech B-68
shutdown B-72
snmp-server B-73
ssh-version B-74
telnetenable B-75
username B-76
webtimeout B-78
syntax, checking B-3
typographical conventions B-4
use of quotes in commands B-2
using B-2
client
detail report, displaying 6-14
group association report 6-22
historical association report, displaying 6-18
inventory, troubleshooting 10-18
inventory of associations 3-81
per VLAN (group) report, displaying 6-35
per VLAN (individual) report, displaying 6-62
statistics report, displaying 6-16
top n bit error rate, displaying 6-85
top n busiest report, displaying 6-82
top n MIC error rate, displaying 6-84
client polling interval, setting 3-89
client walkabout 7-24
checking status 7-33
creating 7-26
deleting 7-34
editing 7-34
guidelines 7-25
naming 7-28
options 7-30
refresh walkabout list 7-38
running 7-31
starting 7-35
stopping 7-35
viewing AP location details 7-37
viewing details 7-36
clock command B-21
collector log, displaying B-56
command reference B-1
community strings
definition GL-2
guidelines 3-30
recommendations 3-31
requirement for 3-28
setting on devices 3-5
specifying 3-28
configuration, WLSE
backing up
by using the CLI 9-6
using Web interface 8-21
copying to another WLSE 9-10
Ethernet interfaces 9-14
restoring
by using the CLI 9-7
using Web interface 8-21
configuration archives
recommendations for using 4-286
configuration history, viewing device's 6-2
configured radio parameters report (11b), displaying 6-9
configuring devices
configuration jobs 4-267
FAQs 10-19
firmware, updating 5-1
radio management assisted configuration 7-60
setting up for discovery 3-5
templates, using 4-1
troubleshooting 10-22
connectivity, testing 8-35
console/Telnet services (non-IOS), configuring 4-225
conventions
CLI B-2
in command descriptions B-4
conversion
access points, from non-IOS to IOS 5-38
templates, non-IOS to IOS 4-256
CoS (class of service), configuring from DSCP 4-148
credentials, devices
entering on WLSE 3-27
HTTP 3-32
HTTP port 3-35
SNMP 3-28
Telnet/SSH 3-33
WLCCP 3-36
CSV files, about 3-49
current reports, displaying 6-19
AP and bridge connected to router report 6-68
AP and bridge connected to switch report 6-66
AP associations 6-48
AP Ethertype protocol filters report 6-51
AP IP port filters report 6-53
AP IP protocol filters report 6-52
AP policy report 6-55
AP QoS report 6-56
AP SSID report 6-58
AP summary 6-40
AP usage report 6-70
AP VLAN report 6-60
detailed 6-43
EAP authentication 6-50
group client association 6-22
group policy report 6-38
group security 6-26
group SSID 6-29
group VLAN 6-32
hot standby report 6-64
per VLAN (group) client report 6-35
per VLAN client (individual) report 6-62
router summary 6-67
server summary report 6-69
switch summary 6-65
custom values, configuring
IOS template 4-99
non-IOS template 4-251
D
daemon log, displaying 8-4, B-58
daemon manager log, displaying 8-4, B-59
database
backing up 8-21
checking database status 10-39
purging 9-19
reinitializing B-43
restoring 8-21
date and time
displaying
current local time setting 8-33
system time B-11
incorrect, troubleshooting 10-9
in WLSE displays 1-8
setting
browser time 8-33
current local time 8-33
system time, by using Web interface 8-33
synchronizing to a time server 8-34, B-40
deleting
devices 3-77
groups 3-113
detailed report, displaying 6-43
device center 6-2
Device Credentials option 3-27
devices
configuring
archive jobs 4-293
configuration jobs 4-271
setting up for discovery 3-5
templates 4-1
connectivity, testing 8-35
credentials, setting 3-27
deleting 3-77
device name, display of 1-8
exporting
to a file 3-96
to CiscoWorks server 3-94
fault summary, viewing 6-2
firmware, updating 5-1
getting started with device management 3-3
grouping 3-98
history viewing 6-2
limitation on number of access points 3-80
location manager 7-42
managing
auto-management filtering 3-65
auto-managment, all devices 3-65
management state, changing 3-76
understanding 3-42
new versions, supporting 8-38
setting up 3-5
unmanaged 3-76
device selector, using 1-9
diagnostics, WLSE
processes, viewing 8-32
self-test 8-29
status reports 8-28
discovery
advanced options 3-63
CDP, enabling
on access points and bridges 3-6
on routers and switches 3-24
CDP discovery, running 3-54
device import
running 3-59
understanding 3-47
device setup for 3-5
discovery logs 3-69
Discovery Run Details window 3-69
FAQs 10-39
filtering
by IP address 3-68
by MAC address (access points) 3-65
history 3-91
individual device seeding 3-46
logs 3-69
messages 3-71
troubleshooting 10-15
common problems 3-74
devices discovered, but not displayed 10-15
Misconfigured Devices group 10-16
seed devices 10-14
SNMP Authorization Exception in discovery log 10-18
time discrepancy in jobs 10-16
understanding 3-42
wizard 3-54
Discovery Run Details window 3-69
disk
checking and repairing B-79
usage, viewing B-22
DNS
configuring (IOS) 4-62
configuring (non-IOS) 4-231
definition GL-3
name servers, specifying 8-34, B-33
reverse lookup
effect on device name display 3-64
enabling 3-64
documentation xx
audience for this xix
obtaining xxii
typographical conventions in xx
domain name
default, defining B-33
displaying B-12
dot11 mib fault
Misconfigured group, devices in 3-10
troubleshooting 10-16
DSCP to CoS (non-IOS), configuring 4-148
dumptcp command B-23
E
EAP-MD5 server
AP usage report, displaying 6-70
authentication report, displaying 6-50
definition GL-3
setting up 3-25
summary report, displaying 6-69
automatic configuration results 4-308
faults 2-55
forwarding B-37
logs and queues 8-3, B-36, B-62
mail server, specifying by using the CLI 9-16
mail server, specifying by using Web interface 8-35
notification settings 2-55
report 6-88
scheduling 6-90
testing and debugging B-35
erase config command B-24
erasing system configuration 9-19, B-24
Ethernet, configuring fast (IOS) 4-9
Ethernet, WLSE
connectors, labeling on WLSE 1130 9-14
firewall CLI command B-25
interface CLI command B-31
ports, configuring 9-14
Ethernet filters (non-IOS), configuring 4-152
Ethernet port (non-IOS), configuring 4-149
advanced settings 4-154
filters 4-152
hardware 4-153
identification 4-150
Ethertype filters, configuring
IOS template 4-72
non IOS template 4-112
event
handling (non-IOS), configuring 4-245
log (IOS), configuring 4-91
notification (non-IOS), configuring 4-250
exception, definition GL-3
exit command B-10
exporting
devices 3-94
reports
GUI-based, using 6-88
URL-based, using 6-94
templates 4-261
F
FAQs
administration 10-39
configuration 10-19
faults 10-12
firmware 10-23
general 10-2
radio manager 10-35
reports 10-30
fastEthernet (IOS), configuring 4-9
faults
defined 2-3
displaying 2-1
emailing 2-55
exception, definition of GL-3
FAQs 10-12
fault history truncation interval, setting 8-38
faults log (WLSE), displaying 8-4
network-wide settings 2-49
notification settings 2-51
emailing faults 2-55
syslog 2-54
trap notification 2-51
parameters for fault reporting 8-38
security policy, specifying 2-18
states, understanding 2-3
threshold-related, understanding 2-4
thresholds, specifying 2-18
troubleshooting 10-13
understanding 2-2
filters
AP Ethertype protocol report, displaying 6-51
AP IP port report, displaying 6-53
AP IP protocol report, displaying 6-52
discovery
by IP Address 3-68
by MAC address (access points) 3-65
Ethernet (non-IOS), configuring 4-152
Ethertype (IOS), configuring 4-72
Ethertype (non-IOS), configuring 4-112
IP (IOS), configuring 4-66
IP port (non-IOS), configuring 4-120
IP protocol (non-IOS), configuring 4-116
MAC address (IOS), configuring 4-63
firmware
"not verified" status 5-33
converting non-IOS device to IOS 5-20
estimating change window 5-3
FAQs 10-23
history, viewing device's 6-2
how firmware upgrades work 5-2
images
deleting 5-8
editing on WLSE 5-6
importing 5-8
storing on remote TFTP server 5-13
viewing 5-6
jobs
copying 5-32
creating 5-16
deleting 5-31
details, displaying 5-32
displaying 5-30
editing 5-31
failures 5-33
job choices 5-16
number of devices in 10-25
protocol, changing 5-32
scheduling 5-19
status, checking 5-28
time discrepancy in schedule 10-25
validating 5-20
new versions, support for 8-38
supported versions, displaying 8-39
troubleshooting 10-23
cryptography permissions, message about 10-28
email fails to arrive 10-26
job not verified 10-27
slow links 10-28
SNMP job fails 10-26
some devices not updated 10-26
Telnet/SSH credentials 10-29
upgrading
about 5-2
procedures 5-5
versions supported by WLSE
updating 8-39
viewing 8-38
floor information, Location Manager 7-49
fsck command B-79
FTP, configuring 4-233
G
gethostbyname command B-26
getting started
with device management 3-3
with WLSE 1-1
group client association report, displaying 6-22
group performance report
Ethernet utilization 6-74
RF utilization 6-73
groups
client association report, displaying 6-22
copying
rule-based 3-108
static 3-107
creating
rules-based 3-105
static 3-103
deleting 3-113
editing
rule-based 3-111
static 3-110
IOS reports 6-20
Misconfigured Devices group 10-16
non-IOS reports 6-20
overview 3-98
performance report for Ethernet utilization, displaying 6-74
performance report for RF utilization, displaying 6-73
per VLAN client report, displaying 6-35
policy report, displaying 6-38
rule-based
copying 3-108
creating 3-105
deleting 3-113
editing 3-111
security report, displaying 6-26
SSID report, displaying 6-29
static
creating 3-103
creating by copying 3-107
deleting 3-113
editing 3-110
system-defined 3-98
top number of associations report, displaying 6-75
top percentage errors report, displaying 6-77
understanding 3-98
user-defined 3-100
VLAN report, displaying 6-32
GUI
About button 1-7
dashboard 1-5
device name display 1-8
Help button 1-7
Logout button 1-7
tabs and subtabs 1-5
time display 1-8
timeout period 1-11
H
hardware configuration, Ethernet port 4-153
help
CLI, displaying B-3
Web interface 1-7
host file
importing B-27
hostname
changing system hostname B-27
translating to IP addresses B-40
hostname command B-27
hot standby
configuring
IOS template 4-58
non-IOS template 4-227
report, displaying 6-64
HTTP
configuring
IOS template 4-74
non-IOS template 4-234
credentials for non-IOS access points 3-32
definition GL-4
setting on access points 3-6
HTTPS
certificate signed request, obtaining
using the Web interface 8-18
definition GL-4
log, viewing 8-3
using to export devices 3-96
I
images
access point firmware 5-1
WLSE software 8-5
import command B-27
importing
device firmware 5-8
devices
about CSV files 3-49
from CiscoWorks server 3-61
from file 3-59
understanding 3-47
firmware versions, support for 8-38
image for Location Manager 7-48
templates 4-257
installing a replacement WLSE
installing the new WLSE 9-9
removing the old WLSE 9-8
installing software updates, WLSE
from the CLI 9-10
from the Web interface 8-12
interface command B-31
interference, setting network-wide fault detection 2-50
inventory
automatic
polling interval 3-82
understanding 3-81
client associations inventory 3-81
FAQs 10-14
history 3-91
immediate 3-84
logs 3-91
performance inventory 3-81
polling intervals
guidelines for 3-83
setting 3-87
run by Radio Manager 3-92
running 3-84
scheduled 3-80
troubleshooting
common problems 3-93
effects on traffic and performance 10-18
length of time required 10-18
IOS
access point reports 6-21
converting APs from non-IOS to IOS 5-35
group reports 6-20
templates, configuration 4-3
templates, converting from non-IOS 4-256
trend report 6-84
IP addresses
in UI, display of 1-8
translating to hostnames B-40
IP chains, displaying B-61
ip domain-name command B-33
IP filters (IOS), configuring 4-66
ip name-server command B-33
IP port filters (non-IOS), configuring 4-120
IP protocol filters (non-IOS), configuring 4-116
J
Java Plugin
requirement for Windows XP repository 8-10
job history truncation interval, setting 3-89
jobs, archive
copying 4-297
creating 4-293
deleting 4-297
editing 4-296
filtering 4-296
job run details, viewing 4-298
managing 4-261
overview 4-286
recommendations 4-286
running again 4-297
viewing status 4-293
jobs, configuration
copying 4-283
creating 4-277
deleting 4-282
editing 4-281
filtering 4-281
managing 4-267
naming guidelines A-1
overview 4-268
recommendations 4-269
running again 4-282
undoing 4-283
viewing status 4-278
jobs, email 6-90
jobs, firmware
copying 5-32
creating 5-15
deleting 5-31
duration 5-25
editing 5-31
FAQs 10-23
filtering 5-30
for converting access points to IOS 5-43
job run details 5-32
managing 5-14
naming guidelines A-1
troubleshooting 10-23
viewing 5-28
jobs log, displaying 8-4
L
LEAP server
AP usage report, displaying 6-70
definition GL-4
EAP authentication report, displaying 6-50
setting response time 2-18
setting up 3-25
summary report, displaying 6-69
Links subtab 8-48
listbackup command B-35
local
admin access (non-IOS), configuring 4-209
AP/client security (non-IOS), configuring 4-213
location manager 7-39
channel color key 7-41
measuring tool 7-40
logging in
from Web interface 1-11
procedure 9-2
splash screen, adding a message 8-32
troubleshooting
cannot log in 10-5
cannot log in as system administrator 10-5
failure of authentication source 10-39
password created in CLI 10-41
logging out
from the CLI 9-2
from the WLSE 1-11
logs, WLSE
collector log B-56
discovery logs 3-69
displaying, using Web interface 8-3
displaying from the CLI 9-17
downloading 8-3
emailing 8-3
install logs B-60
inventory logs 3-91
searching 8-3
syslog B-67
system log 8-32
View Log File option 8-3
Web SSL access log B-72
M
MAC address, displaying B-13
MAC address filters (discovery) 3-65
MAC address filters (IOS), configuring 4-63
mailcntrl clear command B-36
mailcntrl list command B-37
mail command B-35
mailroute command B-37
mail server
specifying, by using the CLI 9-16, B-37
specifying, using Web interface 8-35
maintenance image, WLSE
booting from 9-20
CLI commands for B-78
using 9-19
management services (WLSE) 9-16
Manage Roles option 8-40
Manage Users option 8-42
managing devices
auto-manage filtering 3-65
auto-management 3-65
changing device state 3-76
device detail display 3-79
limitation on number of 3-79
understanding 3-42
Misconfigured Devices system group
description 3-100
moving devices from 10-16
mkcert command B-38
N
name servers, specifying 8-34, B-33
naming guidelines A-1
neighbors (of WLSE), displaying B-55
network
connection failure, troubleshooting 10-6
connectivity testing 8-35
setting up 3-5
network interfaces
configuring
fastEthernet (IOS) 4-9
radio-802.11a (IOS) 4-19
radio-802.11b (IOS) 4-11
on WLSE
information about, displaying B-13
IP chains, displaying B-61
using both interfaces 9-15
template 4-9
network management systems, integrating with WLSE 1-2
non-IOS
access point reports 6-21
converting to IOS 5-35
group reports 6-20
templates, configuration 4-100
templates, converting to IOS 4-256
trend report 6-85
notification settings, faults 2-51
nslookup
definition GL-5
NSlookup tool 8-35
nslookup command B-40
NTP (Network Time Protocol)
configuring IOS template 4-87
configuring time servers on WLSE 8-34, B-40
definition GL-5
setting current date and time 8-34
setting system date and time 9-12
ntp server command B-40
P
packet content, command for displaying B-23
parameters, system 8-38
passwords
changing your password 8-46
HTTP 3-32
LEAP server 3-37
loss of, recovering from 9-23
Telnet 3-33
WLSE users 8-42
path loss between managed APs report (11b) 6-10
path loss data, collecting 7-9
PEAP server
ACS failed login report 8-49
entering on WLSE 3-37
setting up 3-25
performance
inventory 3-81
parameters for data collection 8-38
problems caused by frequent client inventory 10-18
performance graph, displaying for access points and bridges 6-80
performance polling interval, setting 3-89
performance table, displaying for access points and bridges 6-81
per VLAN client (group) report, displaying 6-35
ping
CLI command B-10
definition GL-6
Ping tool 8-35
policy
AP report, displaying 6-55
group report, displaying 6-38
groups, configuring 4-124
polling
aggregation parameters 3-90
fault and job data truncation parameters 3-89
inventory parameters 3-88
port
assignments, configuring 4-147
port filtering (WLSE), configuring B-25
primary service set
association service set, configuring 4-139
radio11a service set, configuring 4-204
processes, WLSE
active statistics, displaying B-63
starting and stopping 8-29
protocols, on WLSE 9-14
proxy mobile IP (IOS), configuring 4-75
proxy server, for firmware import 5-11
Q
quality of service (QoS)
configuring
associations (non-IOS) 4-133
policies (IOS) 4-78
radio 11a (non-IOS) 4-206
radio traffic (IOS) 4-82
report, displaying 6-56
R
radio
11a (non-IOS), configuring 4-175
advanced 4-185
data encryption 4-195
filters 4-179
hardware 4-180
identification 4-176
module service sets 4-199
primary module service set 4-204
QoS 4-206
searched channels 4-192
11b (non-IOS), configuring 4-157
advanced 4-167
filters 4-160
hardware 4-161
identification 4-158
searched channels 4-173
802.11a (IOS), configuring 4-19
802.11b (IOS), configuring 4-11
monitoring 7-6
radio manager
access points, configuring for 3-13
AP radio scans 7-9
assisted configuration 7-60
FAQs 10-35
overview 7-2
radio monitoring 7-6
reports, displaying 6-8
troubleshooting 10-35
radio measurements, collecting 7-4
radio measurements, deleting 7-71
radio monitoring 7-6
RADIUS
authentication module 8-17
definition GL-7
RADIUS server
AP usage report, displaying 6-70
EAP authentication report, displaying 6-50
setting response time 2-18
setting up 3-25
summary report, displaying 6-69
rebooting, WLSE
using Web interface 8-5
recovery (WLSE)
maintenance image 9-19
recovery CD 9-21
resetting WLSE to factory defaults 9-19
recovery CD (WLSE)
reimaging the WLSE 9-21
rescue image, using 9-22
reimaging the WLSE 9-21
reload command B-42
replacement WLSE, installing
installing the new WLSE 9-9
removing the old WLSE 9-8
reports
ACS failed login report 8-49
current, displaying 6-19
device center, using 6-2
emailing 6-88
exporting 6-88
FAQs 10-30
parameters for 8-38
radio manager, displaying 6-8
scheduling email 6-90
trend, using for capacity planning 6-72
trends, displaying 6-71
troubleshooting 10-30
wireless client, displaying 6-13
repository
browsing 8-13
defining
using Web interface 8-11
definition GL-7
install configure CLI command B-28
install list CLI command B-29
repository add CLI command B-44
repository delete CLI command B-44
repository list CLI command B-45
repository server CLI command B-47
repository source CLI command B-46
show repository CLI command B-64
rescue image, WLSE 9-22
resetting WLSE to factory defaults 9-19
restarting (rebooting) WLSE
bootlog, displaying B-53
from Web interface 8-5
reload command B-23
restore command B-48
restoring data from backups
restoring from one WLSE to another 9-10
using Web interface 8-26
reverse DNS lookup 3-64
rogue AP
displaying location of 7-52
setting network-wide fault detection 2-49
roles
creating and modifying 8-41
deleting 8-40
for users created by using the CLI 9-3
naming guidelines A-1
predefined 8-40
XML API privileges 8-40
route command B-49
router
AP and Bridge connected to, displaying 6-68
fault thresholds, setting 2-18
setting up 3-24
summary report, displaying 6-67
system-defined group for 3-98
routes (WLSE)
adding B-49
routing (non-IOS), configuring 4-229
S
scheduling
archive jobs 4-291
backups 8-24
configuration jobs 4-275
discovery 3-54
email 6-90
firmware jobs 5-15
inventory 3-82
search, for devices
troubleshooting 10-4
using 1-10
security
advanced (IOS), configuring 4-46
authentication (WLSE)
enabling B-17
failure of authentication source 10-39
modules 8-16
troubleshooting 10-39
HTTPS (WLSE) 8-18
IOS templates 4-26
admin access 4-26
advanced 4-46
local RADIUS server 4-51
server manager 4-41
SSID manager 4-29
WEP key manager 4-37
last 10 logged in users, viewing 8-20
log, displaying B-65
non-IOS templates 4-208
authentication server 4-216
local admin access 4-209
local AP/client 4-213
SSH 8-20
SSL
certificate signed request, obtaining
by using Web interface 1
Telnet, enabling or disabling 8-20
security policy
monitoring, understanding 2-2
seed
CDP-based discovery 3-44
definition GL-7
individual device seeding 3-46
invalid 10-14
server
AAA
managing 3-37
setting up 3-25
AP usage report, displaying 6-70
local RADIUS server (IOS), configuring 4-51
manager (IOS), configuring 4-41
response time graph, displaying 6-86
security (non-IOS), configuring 4-216
setting response time 2-18
summary report, displaying 6-69
server, SMTP 9-16
services (IOS), configuring 4-55
ARP cache 4-90
CDP 4-60
DNS 4-62
Ethertype filters 4-72
hot standby 4-58
HTTP 4-74
IP filters 4-66
MAC address filters 4-63
NTP 4-87
proxy mobile IP 4-75
QoS policies 4-78
QoS radio traffic 4-82
Telnet/SSH 4-56
VLAN 4-88
services (non-IOS), configuring
accounting 4-238
CDP 4-230
console/Telnet 4-225
DNS 4-231
FTP 4-233
hot standby 4-227
HTTP 4-234
routing 4-229
SNMP 4-235
SNTP 4-236
start-up 4-222
services (WLSE)
reintdb command, effect on B-43
stopping and starting 9-16
time reset, requirement for stopping services B-21
services command B-49
service sets (non-IOS)
configuring
primary service set 4-139
service sets 4-134
settings
assigning to devices 2-23
copying for device faults 2-20
creating for device faults 2-19
deleting for device faults 2-22
device fault, understanding 2-18
device faults, managing 2-18
editing for device faults 2-22
local time 8-33
network-wide fault 2-49
renaming for device faults 2-21
system date and time 9-12
viewing summary for device fault 2-23
setting system date and time
using the CLI 9-12
using the Web interface 8-33
short term trending inventory truncation interval, setting 8-38
show auth-cli command B-52
show auth-http B-52
show backupconfig command B-53
show bootlog command B-53
show cdp-neighbor B-55
show cdp-run command B-55
show clock command B-11
show config command B-57
show domain-name command B-12
show import command B-60
show interfaces command B-13
show process command B-14
show route command B-64
show ssh-version command B-66
show syslog command B-67
show tech command B-68
show version command B-15
shutdown command B-72
shutting down (WLSE) 9-11, B-72
SMTP
definition GL-7
server, specifying 8-35
server, specifying by using the CLI 9-16
SNMP
agent, configuring B-73
agent log, displaying 8-4
community strings
guidelines for 3-30
recommendations 3-31
setting on devices 3-5
specifying 3-28
configuration, displaying B-66
configuring
non-IOS template 4-235
definition GL-7
reachability, testing 8-35
retries, recommendations for 3-31
timeouts, recommendations for 3-31
trap notification
MIB 2-51
setting 2-51
traps supported 1-2
variables, querying 8-37
snmp-server command B-73
SNTP, configuring 4-236
software, on devices
converting to IOS 5-35
firmware, managing 5-1
groups for 3-98
software, on WLSE
installation logs, displaying 8-4
maintenance image B-78
overview 8-5
recovery CD 9-21
reimaging the WLSE 9-21
repository, browsing 8-13
status, viewing 8-6
update history, viewing
using Web interface 8-14
updates
history, viewing 8-14
installing, by using Web interface 8-12
Internet Explorer, problems using 10-40
transferring to WLSE B-44
splash screen, adding a message 8-32
SSH
credentials for access points, entering 3-33
definition GL-7
disabling 10-3
enabling B-74
type, displaying B-66
type, selecting 8-20
ssh-version command B-74
SSID
definition GL-7
manager (IOS), configuring 4-29
report, displaying 6-58
system-defined groups for 3-98
SSL
certificate, obtaining 8-18
certificate signed request, obtaining
CLI command for B-38
definition GL-8
log, displaying 8-4
startup configuration
assigning 4-300
creating a template for 4-302
start-up settings (non-IOS), configuring 4-222
subnet, system-defined group for 3-98
summary report
access point 6-40
router 6-67
server 6-69
switch 6-65
switch
AP and bridge connected to report, displaying 6-66
fault thresholds, setting 2-18
setting up 3-24
summary report, displaying 6-65
system-defined group for 3-98
syntax of commands, checking B-3
sysContact information, updates to 10-14
sysLocation information
not updated in WLSE 10-14
syslog
displaying B-67
notification, setting 2-54
system
configuration
displaying B-57
erasing B-24
hostname, changing B-27
information, viewing 9-17
logs, displaying 9-17
processes, managing 8-29
rebooting
from the Web interface 8-5
using the CLI 9-11
status, displaying 8-29
storage usage, displaying B-22
system log, using 8-32
system parameters, setting 8-38
T
TAC (Technical Assistance Center)
case priorities xxv
information for, displaying B-68
opening a case xxv
website xxiv
TACACS+
authentication module 8-16
definition GL-8
TCP/IP packet content, displaying B-23
TCP Port Scan tool 8-35
Telnet
credentials for IOS access points, entering 3-33
disabling B-75
status, displaying B-68
Telnet/console services (non-IOS), configuring 4-225
Telnet/SSH services (IOS) , configuring 4-56
Telnet connection, troubleshooting 10-10
telnetenable command B-75
templates
automatic configurations 4-300
configuration, defined 4-2
converting from non-IOS to IOS 4-256
copying 4-254
creating, for configuration 4-253
deleting 4-257
editing 4-255
exporting 4-261
for converting access points to IOS 5-41
importing 4-257
IOS choices 4-3
non-IOS choices 4-100
using 4-1
TFTP
definition GL-8
setting up on access points 3-8
threshold
definition GL-8
specifying fault threshold 2-18
time
browser time, setting 8-33
display of, on WLSE 1-8
incorrect, troubleshooting 10-9
synchronizing to an NTP server 8-34
system time, setting
using CLI command 9-12
UTC
definition GL-9
display of 1-8
timeout period
webtimeout command B-78
WLSE Web interface 1-11
tomcat log, displaying 8-4, B-69
top n number of associations report, displaying 6-75
top n percentage errors report, displaying 6-77
traceroute
command B-15
definition GL-9
Traceroute tool 8-35
transmission statistics
displaying Ethernet for AP and bridge 6-79
displaying RF for AP and bridge 6-78
traps
MIB to define 2-51
setting for notification 2-51
version supported, on WLSE 1-2
trending data
aggregatiion of 3-90
data retention parameters 3-90
trend reports, using for capacity planning 6-72
trends, displaying 6-71
AP and bridge Ethernet transmission statistics 6-79
AP and bridge performance graph 6-80
AP and bridge performance table 6-81
AP and bridge RF transmission statistics 6-78
group performance report, Ethernet utilization 6-74
group performance report, RF utilization 6-73
server response time graph 6-86
top n busiest clients 6-82
top n client bit error rate 6-85
top n client MIC error rate 6-84
top n number of associations report 6-75
top n percentage errors report 6-77
troubleshooting
administration 10-39
AP web page, accessing 10-4
configuration 10-22
diagnostics for WLSE appliance 8-28
faults 10-13
firmware 10-25
passwords, loss of 9-23
process management for WLSE appliance 8-29
radio manager 10-35
reports 10-30
searching for devices 10-3
WLSE, recovery of 9-18
typographical conventions
in command descriptions B-4
in this document xx
U
undoing a job 4-283
unknown radio, displaying 7-52
unmanaged devices 3-76
upgrade
access point firmware 5-1
WLSE software (by using the CLI) 9-10
WLSE software (by using Web interface) 8-5
usage report, AP 6-70
usage report, displaying 6-70
user-defined
groups 3-100
roles 8-40
username command B-76
users
authentication servers 8-17
CLI access 8-42
creating
using Web interface 8-42
home page, modifying 8-47
last 10 logged in users. viewing 8-20
naming guidelines A-1
roles
assigning to users 8-43
managing 8-40
troubleshooting
authentication failure 10-39
password created in CLI not accepted 10-41
users not listed 10-40
username CLI command B-76
UTC
definition GL-9
on WLSE 1-8
V
VLAN
AP report, displaying 6-60
configuring
IOS template 4-88
non-IOS template 4-126
group report, displaying 6-32
per client report (group), displaying 6-35
per client report (individual), displaying 6-35
system-defined groups for 3-100
W
Web access log, displaying 8-4, B-70
Web error log, displaying 8-4, B-71
Web interface, WLSE 1-3
Web session timeout 1-11, B-78
Web SSL log, displaying B-72
webtimeout command B-78
WEP key manager (IOS), configuring 4-37
WEP keys, definition GL-10
Windows server
as backup location 8-24
as repository 8-10
wireless client polling interval, setting 3-89
wireless client reports, displaying 6-13
client detail 6-14
client historical association 6-18
client statistics 6-16
Wireless Domain Services (WDS)
access points, configuring for 3-13
configuring 4-96
credentials for 3-36
definition GL-10
system-defined groups for 3-100
wireless services, configuring 4-95
WLCCP
credentials, entering on WLSE 3-36
definition GL-10
WLSE 1105, limitation on number of managed devices 3-79
WLSE 1130
Ethernet port labelling 9-14
limitation on number of managed devices 3-79
X
XML API
documentation for xxii
privileges in roles 8-40