Standards Compliance Specifications

Available Languages

Download Options

  • PDF     (168.6 KB)
    View with Adobe Reader on a variety of devices
Updated:October 10, 2007

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Standards Compliance Specifications

Table Of Contents

Standards Compliance Specifications


Standards Compliance Specifications

Catalyst 6000 series switches and Cisco 7600 series routers, when installed in a system, comply with the standards listed in Table C-1.

Table C-1 Regulatory Standards Compliance 

Agency Approvals
Description

Compliance

CE1 Marking

Safety

UL2 1950, CSA3 -C22.2 No. 950, EN4 60950, IEC5  950, TS6  001, AS/NZS7 3260

Electromagnetic compatibility (EMC)

FCC8 Part 15 (CFR9 47) Class A, ICES10 -003 Class A, EN55022 Class A, CISPR22 Class A, AS/NZS 3548 Class A, and VCCI Class A, EN55024, EN300 386, EH50082-1, EN55022 Class B, CISPR22 Class B, VCCI Class B, AS/NZ 3548 Class B

1 CE = European Compliance

2 UL = Underwriters Laboratory

3 CSA = Canadian Standards Association

4 EN = European Norm

5 IEC = International Electrotechnical Commission

6 TS = Technical Specification

7 AS/NZS = Standards Australia/Standards New Zealand

8 FCC = Federal Communications Commission

9 CFR = Code of Federal Regulations

10 ICES = Interference-Causing Equipment Standard


Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products