||Choose Security > AAA > Local Net Users to open the Local Net Users page. |
If you want to delete an existing user, hover your cursor over the blue drop-down arrow for that user and choose Remove.
||Perform one of the following:|
To edit an existing local network user, click the username for that user. The Local Net Users > Edit page appears.
To add a local network user, click New. The Local Net Users > New page appears.
||If you are adding a new user, enter a username for the local user in the User Name text box. You can enter up to 24 alphanumeric characters. |
Local network usernames must be unique because they are all stored in the same database.
||In the Password and Confirm Password text boxes, enter a password for the local user. You can enter up to 24 alphanumeric characters.|
||If you are adding a new user, select the Guest User check box if you want to limit the amount of time that the user has access to the local network. The default setting is unselected.|
||If you are adding a new user and you selected the Guest User check box, enter the amount of time (in seconds) that the guest user account is to remain active in the Lifetime text box. The valid range is 60 to 2,592,000 seconds (30 days) inclusive, and the default setting is 86,400 seconds.|
||If you are adding a new user, you selected the Guest User check box, and you want to assign a QoS role to this guest user, select the Guest User Role check box. The default setting is unselected. |
If you do not assign a QoS role to a guest user, the bandwidth contracts for this user are defined in the QoS profile for the WLAN.
||If you are adding a new user and you selected the Guest User Role check box, choose the QoS role that you want to assign to this guest user from the Role drop-down list.|
||From the WLAN Profile drop-down list, choose the name of the WLAN that is to be accessed by the local user. If you choose Any WLAN, which is the default setting, the user can access any of the configured WLANs.|
||In the Description text box, enter a descriptive title for the local user (such as “User 1”).|
||Click Apply to commit your changes.|
||Click Save Configuration to save your changes.|