Contents

8 - A - C - D - E - G - I - L - M - N - P - R - S - T - V -

Index

8

802.11a (or 802.11b/g) Global Parameters page 1
802.11a > RRM > Dynamic Channel Assignment (DCA) page 1
802.11a > RRM > General page 1
802.11a/n (or 802.11b/g/n) Radios page 1

A

All APs page 1
AnchorTime parameter 1
Antenna Gain parameter 1
Antenna parameter 1
Antenna Type parameter 1
AP Mode parameter 1
Assignment Method parameter 1
Avoid Cisco AP Load parameter 1
Avoid Foreign AP Interference parameter 1
Avoid Non-802.11a (802.11b) Noise parameter 1

C

CCX radio management
features 1
flexconnect considerations 1
Channel Assignment Leader parameter 1
Channel Assignment Method parameter 1
Channel parameter 1
Channel Scan Duration parameter 1
Channel Width Parameter 1
Configure option for RRM override 1
Configure RF Group
Using CLI 1
Configure RF Group Mode
Using GUI 1
Coverage Exception Level per AP parameter 1
coverage hole detection
configuring per controller
using the CLI 1
using the GUI 1
coverage hole detection and correction 1

D

DCA Channel Sensitivity parameter 1
DCA Channels parameter 1
Diversity parameter 1
dynamic channel assignment (DCA)
20-MHz channelization 1
40-MHz channelization 1
configuring
using the CLI 1
using the GUI 1
described 1

E

Enable Coverage Hole Detection parameter 1

G

General (controller) page
configuring an RF group 1
Group Mode parameter 1

I

interference 1
Interference threshold parameter 1
Interval parameter 1
Invoke Channel Update Now button 1
Invoke Power Update Now button 1

L

Last Auto Channel Assignment parameter 1
location
calibration 1

M

Min Failed Client Count per AP parameter 1
mobility groups
difference from RF groups 1
Mode parameter 1
monitor intervals, configuring using the GUI 1

N

Neighbor Discovery Packet 1
Neighbor Packet Frequency parameter 1

P

Power Neighbor Count parameter 1
Power Threshold parameter 1
Protection Type parameter 1

R

radio measurement requests
configuring
on the CLI 1
on the GUI 1
overview 1
viewing status using the CLI 1
radio resource management (RRM)
CCX features. See <Default Para Font>CCX radio management 1
configuring
monitor intervals using the GUI 1
coverage hole detection
configuring per controller using the GUI 1
described 1
debugging 1
disabling dynamic channel and power assignment
using the CLI 1
overriding RRM 1
specifying channels 1
statically assigning channel and transmit power settings
using the GUI 1
update interval 1 2
Wireless > 802.11a/n (or 802.11b/g/n) > RRM > TPC parameter 1
radio resource management (RRM) settings
viewing using the CLI 1
radio resource monitoring 1
RF Channel Assignment parameter 1
RF group leader
described 1
RF group name
described 1
RF groups
cascading 1
configuring
using the GUI 1
overview 1 2
pinning 1
viewing status
using the CLI 1
using the GUI 1
RF-Network Name parameter 1
rogue access points
alarm 1
RRM. See <Default Para Font>radio resource management (RRM) 1

S

Set to Factory Default button 1

T

transmit power
statically assigning using the CLI 1
statically assigning using the GUI 1
transmit power levels 1
transmit power threshold, decreasing 1
Tx Power Level Assignment parameter 1

V

Voice RSSI parameter 1