Change
|
The word at the cursor to lowercase.
|
Esc I
|
|
The word at the cursor to uppercase.
|
Esc u
|
Delete
|
A character to the left of the cursor.
|
Ctrl-h, Delete, or Backspace
|
|
All characters from the cursor to the beginning of the line.
|
Ctrl-u
|
|
All characters from the cursor to the end of the line.
|
Ctrl-k
|
|
All characters from the cursor to the end of the word.
|
Esc d
|
|
The word to the left of the cursor.
|
Ctrl-w or Esc Backspace
|
Display MORE output
|
Exit from MORE output.
|
q, Q, or Ctrl-C
|
|
Next additional screen. The default is one screen. To display more than one screen, enter a number before pressing the Spacebar key.
|
Spacebar
|
|
Next line. The default is one line. To display more than one line, enter the number before pressing the Enter key.
|
Enter
|
Enter an Enter or Return key character.
|
Ctrl-m
|
Expand the command or abbreviation.
|
Ctrl-t or Tab
|
Move the cursor
|
One character to the left (back).
|
Ctrl-b or Left Arrow
|
|
One character to the right (forward).
|
Ctrl-f or Right Arrow
|
|
One word to the left (back), to the beginning of the current or previous word.
|
Esc b
|
|
One word to the right (forward), to the end of the current or next word.
|
Esc f
|
|
To the beginning of the line.
|
Ctrl-a
|
|
To the end of the line.
|
Ctrl-e
|
Redraw the screen at the prompt.
|
Ctrl-l or Ctrl-r
|
Return to the EXEC mode from any configuration mode
|
Ctrl-z
|
Return to the previous mode or exit from the CLI from Exec mode.
|
exit command
|
Transpose a character at the cursor with a character to the left of the cursor.
|
Ctrl-t
|