Table Of Contents

W

web skipinitwizard

write

W

---

Last Updated: July 25, 2006

web skipinitwizard

write

web skipinitwizard

To disable the initialization wizard during the Cisco Unity Express installation process, use the web skipinitwizard command in Cisco Unity Express EXEC mode.

web skipinitwizard

Syntax Description

This command has no arguments or keywords.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Release	Modification
2.1	This command was introduced.

Usage Guidelines

This command turns off the initialization wizard. You cannot turn on or return to the initialization wizard unless you reimage the Cisco Unity Express module.

Use this command after installing the Cisco Unity Express software files and before starting the configuration process.

Turning off the initialization wizard allows you to configure Cisco Unity Express using only CLI commands, for example, if you want to run configuration scripts.

See the Cisco Unity Express 2.3 GUI Administrator Guide for the configuration tasks covered by the initialization wizard.

Examples

The following example turns off the initialization wizard:

se-10-0-0-0# web skipinitwizard

se-10-0-0-0# 

write

To erase, copy, or display the running configuration, use the write command in Cisco Unity Express EXEC mode.

write [erase | memory | terminal]

Syntax Description

erase	(Optional) Erases the running configuration.
memory	(Optional) Writes the running configuration to the startup configuration. This is the default.
terminal	(Optional) Displays the running configuration.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Release	Modification
1.0	This command was introduced on the Cisco Unity Express network module and in Cisco Unified Communications Manager Express 3.0.
1.1	This command was implemented on the advanced integration module (AIM) and in Cisco Unified Communications Manager 3.3(3).
1.1.2	This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Usage Guidelines

Use the write or write memory command as a shortcut for the copy running-config startup-config command.

Related Commands

Command	Description
erase startup-config	Deletes the current startup configuration.