Table Of Contents
N
name (network location id)
To specify the name of a network location, use the name command in location configuration mode. To set the name to an empty string, use the no form of this command.
name name
no name name
Syntax Description
name
Descriptive name used to identify the location. Enclose the name in double quotes if spaces are used.
Defaults
No network location is specified.
Command Modes
Location configuration
Command History
Examples
The following example creates the remote location ID 9 with the name mylocation:
se-10-0-0-0# config tse-10-0-0-0(config)# network location id 9se-10-0-0-0(config-location)# name mylocationRelated Commands
network copy spokenname
To upload or download a spoken name for a network location, use the network copy spokenname command in Cisco Unity Express EXEC mode.
Uploading the Spoken Name
network copy spokenname location id location-id url url loginname server-login password server-password
Downloading the Spoken Name
network copy spokenname url url location id location-id loginname server-login password server-password
Syntax Description
location id location-id
Network location ID.
url url
URL to the spoken name file on the server.
loginname server-login
Server login.
password server-password
Server password.
Command Modes
Cisco Unity Express EXEC
Command History
Usage Guidelines
Use the Administration via Telephone (AvT) options to record the spoken names. Those name files are stored in the Lightweight Directory Access Protocol (LDAP) on the Cisco Unity Express module. If you download the files to a server other than the Cisco Unity Express module, you can upload those files to another Cisco Unity Express module in the network.
Examples
The following example uploads the spoken name file rename.wav for location 500:
se-10-0-0-0# network copy spokenname location id 500 url ftp:/10.4.51.66/rename.wav loginname admin password testThe following example downloads the spoken name file rename.wav for location 500:
se-10-0-0-0# network copy spokenname url ftp:/10.4.51.66/rename.wav location id 500 loginname admin password testRelated Commands
Specifies the ID of a remote location.
Displays information about network locations.
network location
To specify the location ID of a remote voice-mail system and to enter location configuration mode, use the network location command in Cisco Unity Express configuration mode. To delete the network location configuration, use the no form of this command.
network location id number
no network location id number
Syntax Description
id number
Specifies the ID number of the remote voice-mail system. The maximum length of the number is 7 digits. Cisco Unity Express supports a maximum of 500 locations.
Defaults
No location IDs are configured.
Command Modes
Location configuration
Command History
Usage Guidelines
Use this command to create a remote location ID and enter location configuration mode. In location configuration mode, you can complete the remote location configuration.
Examples
The following example creates the remote location ID 9 and enters location configuration mode:
se-10-0-0-0# config tse-10-0-0-0(config)# network location id 9se-10-0-0-0(config-location)#Related Commands
ntp server
To configure the Network Time Protocol (NTP) server to keep the system time in synchronization with the NTP server, use the ntp server command in Cisco Unity Express configuration mode. To delete the NTP server name, use the no form of this command.
ntp server {hostname | ip-address} [prefer]
no ntp server {hostname | ip-address}
Syntax Description
hostname
Hostname of the NTP server.
ip-address
IP address of the NTP server.
prefer
(Optional) Marks the server as preferred.
Defaults
The default is the IP address of the Cisco CallManager server.
Command Modes
Cisco Unity Express configuration
Command History
Usage Guidelines
Use this command in conjunction with the clock timezone command to set the timing functions for Cisco Unity Express systems and applications.
The prefer option indicates that the specified server will be chosen for synchronization from among a set of correctly operating hosts.
CautionThe no ntp server command deletes the NTP server name and the Cisco CallManager router IP address. Use this command with caution as it can disrupt communication between Cisco Unity Express and
Cisco CallManager.
Examples
The following example assigns the server with address 192.168.10.0 as the NTP server:
se-10-0-0-0> enablese-10-0-0-0# config tse-10-0-0-0(config)# ntp server 192.168.10.0 preferThe following example assigns the server main_ntp as the NTP server:
se-10-0-0-0> enablese-10-0-0-0# config tse-10-0-0-0(config)# ntp server main_ntpRelated Commands
Configures the local time zone.
Displays current clock statistics.
Displays current NTP server statistics.
