Table Of Contents
U
username
U
username
username
To configure a Cisco Unity Express user, use the username command in either Cisco Unity Express EXEC mode or configuration mode.
EXEC Mode
username name [create | delete |
fullname [first "first" | last "last-name" | display "full-name"] | group group-name |
language xx_YY | password "password" | pin number]
Configuration Mode
username name [password "password" | phonenumber phonenumber |
phonenumberE164 full-number | pin number]
Syntax Description
name
|
Specifies the name or ID of the user to be created. The username must be at least 3 and no more than 32 characters in length. Cisco Unity Express allows only letters, numbers, and the characters underscore (_), dot (.), and dash (-) in user IDs. User IDs must start with a letter. Do not use spaces in the username.
|
create
|
(Optional) Creates a user with no other information.
|
delete
|
(Optional) Deletes the user.
|
fullname first "first"
|
(Optional) First name of the user. The name must be entered in double quotes (" ").
|
fullname last "last-name"
|
(Optional) Last name of the user. The name must be entered in double quotes (" ").
|
fullname display "full-name"
|
(Optional) Name as the user wants it to appear on other telephone displays. The name must be entered in double quotes (" ").
|
group group-name
|
(Optional) Group with which this user is associated. If the group-name value does not exist, this command creates it.
|
language xx_YY
|
(Optional) Language of the prompt. Valid values are:
• en_EN (U.S. English)
•de_DE (German)
•fr_FR (European French)
•es_ES (European Spanish)
|
password password
|
(Optional) Password for the user. The password must be entered in double quotes (" "). Valid values contain at least 3 but not more than 32 characters in length. Spaces are not allowed. Acceptable password characters are lowercase letters a to z, uppercase letters A to Z, digits 0 to 9, and the following symbols: - , . + = _ ! @ # $ ^ * ( ) ? / ~ < > & %.
|
phonenumber phonenumber
|
(Optional) Extension or number for this user.
|
phonenumberE164 full-number
|
(Optional) Full telephone number, including area code, for the user.
|
pin number
|
(Optional) Personal identification number for the user. Valid values are at least 3 but not more than 19 characters in length, consisting of letters and numbers. No other characters are permitted.
|
Defaults
language: U.S. English
Command Modes
Cisco Unity Express EXEC
Cisco Unity Express configuration
Command History
Cisco Unity Express Release
|
Modification
|
1.0
|
This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.
|
1.1
|
This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).
|
1.1.2
|
This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.
|
2.0
|
Updated for CUE 2.0.
|
Usage Guidelines
The EXEC version of the command stores the permitted information in Cisco Unity Express flash memory. If a problem with the disk occurs, this information is available so that the user may access the voice-mail system.
The configuration version of the command is stored in the Cisco Unity Express system configuration file. If a power outage or a system shutdown occurs, the user information can be retrieved.
Examples
The following example creates a user user1, assigns her as a member to the Sales group, and assigns the extension 0190, a password, and a PIN.
se-10-0-0-0# username user1 fullname display "User 1"
se-10-0-0-0# username user1 group Sales
se-10-0-0-0# username user1 password "sales123"
se-10-0-0-0# username user1 pin 4122
se-10-0-0-0(config)# username user1 phonenumber 2004
se-10-0-0-0(config)# username user1 phonenumberE164 12225550190
se-10-0-0-0# show user detail username user1
Phone(E.164): 12225550190
Related Commands
