Table Of Contents

O

offline

O

---

offline

offline

To enter the environment for the backup and restore procedures, use the offline command in Cisco Unity Express EXEC mode.

offline

Syntax Description

This command has no arguments or keywords.

Command Modes

Cisco Unity Express EXEC

Command History

Cisco Unity Express Release	Modification
1.0	This command was introduced on the Cisco Unity Express network module and in Cisco CallManager Express 3.0.
1.1	This command was implemented on the advanced integration module (AIM) and in Cisco CallManager 3.3(3).
1.1.2	This command was implemented on the Cisco 2800 series and Cisco 3800 series routers.

Usage Guidelines

Backup and restore procedures require that call activity be halted before the procedures begin. The offline command terminates all active calls and prevents new calls from being accepted. Consider scheduling this procedure when call activity is at a minimum.

The offline command does not start the backup or restore procedure.

Examples

The following example illustrates the use of the offline command:

se-10-0-0-0> enable

se-10-0-0-0# show backup server

se-10-0-0-0# offline

!!!WARNING!!!: Putting the system offline will terminate all active calls.

Do you wish to continue[n]? : y

se-10-0-0-0(offline)#

Related Commandss

Command	Description
backup	Selects data to back up and initiates the backup process.
continue	Exists offline mode and returns to Cisco Unity Express EXEC mode.
restore	Selects data to restore and initiates the restore process.