Table Of Contents
default ccm-manager (ccn subsystem jtapi)
default ctiport (ccn subsystem jtapi)
default gateway (ccn subsystem sip)
D
default ccm-manager (ccn subsystem jtapi)
default ctiport (ccn subsystem jtapi)
default gateway (ccn subsystem sip)
database compact
To free up space and compact the voice mail database on the Cisco Unity Express module, use the database compact command in Cisco Unity Express offline mode.
database compact
Syntax Description
This command has no arguments or keywords.
Command Modes
Cisco Unity Express offline mode
Command History
Usage Guidelines
The database compact command frees up the dead cells in the database and compacts all the database files to their minimum size.
Use the command when the voice mail database is nearing its limit.
Do not run any backup or restore operations while the database compact command is executing.
Examples
The following example illustrates the database compact command and sample output:
se-10-0-0-0# offline
se-10-0-0-0(offline)# database compact
INFO: vacuuming "information_schema.sql_features"INFO: "sql_features": found 0 removable, 360 nonremovable row versions in 5 pagesDETAIL: 0 dead row versions cannot be removed yet.Nonremovable row versions range from 68 to 208 bytes long.There were 0 unused item pointers.Total free space (including removable row versions) is 3616 bytes.0 pages are or will become empty, including 0 at the end of the table.1 pages containing 3468 free bytes are potential move destinations.CPU 0.00s/0.00u sec elapsed 0.00 sec.INFO: "sql_features": moved 0 row versions, truncated 5 to 5 pagesDETAIL: CPU 0.00s/0.00u sec elapsed 0.00 sec.INFO: vacuuming "pg_toast.pg_toast_17070"INFO: "pg_toast_17070": found 0 removable, 0 nonremovable row versions in 0 pagesDETAIL: 0 dead row versions cannot be removed yet.Nonremovable row versions range from 0 to 0 bytes long.There were 0 unused item pointers.Total free space (including removable row versions) is 0 bytes.0 pages are or will become empty, including 0 at the end of the table.0 pages containing 0 free bytes are potential move destinations....CPU 0.01s/0.00u sec elapsed 0.00 sec.INFO: index "vm_dbversion_pkey" now contains 1 row versions in 2 pagesDETAIL: 0 index pages have been deleted, 0 are currently reusable.CPU 0.00s/0.00u sec elapsed 0.00 sec.INFO: "vm_dbversion": moved 0 row versions, truncated 1 to 1 pagesDETAIL: CPU 0.00s/0.00u sec elapsed 0.00 sec.INFO: free space map: 7 relations, 5 pages stored; 112 total pages neededDETAIL: Allocated FSM size: 1000 relations + 20000 pages = 178 kB shared memory.VACUUMse-10-0-0-0(offline)# continueRelated Commands
offline
Enters offline mode.
continue
Exits offline mode and returns to Cisco Unity Express EXEC mode.
default (ccn application)
To reset a ccn application parameter to its default value, use the default command in CCN application configuration mode.
default {description | enabled | maxsessions | parameter name}
Syntax Description
Command Modes
CCN application configuration mode
Command History
Usage Guidelines
The default command sets a Cisco Communication Network (CCN) application parameter to its default value.
Examples
The following example sets the maximum number of sessions to the port license number:
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn application voicemail
se-10-0-0-0(config-application)# default maxsessionsse-10-0-0-0(config-application)# endse-10-0-0-0(config)# exitRelated Commands
default (ccn engine)
To reset the upper limit on the number of steps executed in a CCN application, use the default maxsteps command in CCN engine configuration mode.
default maxsteps
Syntax Description
Command Modes
CCN engine configuration mode
Command History
Usage Guidelines
The default maxsteps command sets the upper limit on the number of steps executed in a CCN application to the default value.
Examples
The following examples reset the specified parameters to their factory values:
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn engine
se-10-0-0-0(config-engine)# default maxstepsse-10-0-0-0(config-engine)# end
se-10-0-0-0(config)# exitRelated Commands
default ccm-manager (ccn subsystem jtapi)
To reset the Cisco CallManager JTAPI subsystem parameters used by Cisco Unity Express, use the default ccm-manager command in Cisco Unity Express CCN subsystem jtapi configuration mode.
default ccm-manager {address | username | password}
Syntax Description
address
Sets the IP address of the Cisco CallManager server to 0.0.0.0.
username
Sets the CCM JTAPI username to an empty string.
password j
Sets the CCM JTAPI password to an empty string.
Command Modes
CCN subsystem jtapi configuration mode
Command History
Usage Guidelines
The default ccm-manager command sets a Cisco CallManager JTAPI subsystem parameter back to its default value.
Examples
The following example sets the CallManager server address to 0.0.0.0.
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn subsystem jtapi
se-10-0-0-0(config-jtapi)# default ccm-manager addressse-10-0-0-0(config-jtapi)# end
se-10-0-0-0(config)# exitRelated Commands
default ctiport (ccn subsystem jtapi)
To reset the Cisco CallManager CTI port address, use the default ctiport command in Cisco Unity Express CCN subsystem jtapi configuration mode.
default ctiport
Syntax Description
Command Modes
CCN subsystem jtapi configuration mode
Command History
Usage Guidelines
The default ctiport command sets the Cisco CallManager CTI port address to its default value.
Examples
The following example sets the CallManager CTI port address to an empty string.
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn subsystem jtapi
se-10-0-0-0(config-jtapi)# default ctiportse-10-0-0-0(config-jtapi)# end
se-10-0-0-0(config)# exitRelated Commands
default gateway (ccn subsystem sip)
To reset the SIP server parameters, use the default gateway command in Cisco Unity Express CCN subsystem sip configuration mode.
default gateway {address | port}
Syntax Description
Command Modes
CCN subsystem sip configuration mode
Command History
Usage Guidelines
The default gateway command sets a SIP server parameter to its default value.
Examples
The following example sets the SIP server port to 5060.
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn subsystem sip
se-10-0-0-0(config-sip)# default gateway portse-10-0-0-0(config-sip)# end
se-10-0-0-0(config)# exitRelated Commands
default (ccn trigger jtapi)
To reset a ccn trigger parameter to its default value, use the default command in CCN trigger jtapi configuration mode.
default {application | enabled | idletimeout | locale | maxsessions}
no default {enabled | maxsessions}
Syntax Description
Command Modes
CCN trigger jtapi configuration mode
Command History
Usage Guidelines
The default command sets a Cisco Communication Network (CCN) trigger parameter to its default value.
Examples
The following example sets the maximum number of sessions to the port license number:
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn trigger jtapi phonenumber 1234
se-10-0-0-0(config-trigger)# default maxsessionsse-10-0-0-0(config-trigger)# endse-10-0-0-0(config)# exitRelated Commands
Configures the CCN applications, such as voice mail and auto attendant.
Configures the parameters used by all CCN applications
Displays all of the CCN application details.
default (ccn trigger sip)
To reset a ccn trigger parameter to its default value, use the default command in CCN trigger sip configuration mode.
default {application | enabled | idletimeout | locale | maxsessions}
no default {enabled | maxsessions}
Syntax Description
Command Modes
CCN trigger sip configuration mode
Command History
Usage Guidelines
The default command sets a Cisco Communication Network (CCN) trigger parameter to its default value.
Examples
The following example sets the maximum number of sessions to the port license number:
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn trigger sip phonenumber 1234
se-10-0-0-0(config-trigger)# default maxsessionsse-10-0-0-0(config-trigger)# endse-10-0-0-0(config)# exitRelated Commands
Configures the CCN applications, such as voice mail and auto attendant.
Configures the parameters used by all CCN applications
Displays all of the CCN application details.
description (ccn application)
To specify a description for a CCN application use the description command in Cisco Unity Express CCN application configuration mode.
description "text"
Syntax Description
text
(Optional) Specifies a text description for the application. Use double quotes around the text.
Command Modes
CCN application configuration mode
Command History
Usage Guidelines
The description command adds a text description for the CCN application.
Examples
The following example adds a description for the CCN auto-attendant application:
se-10-0-0-0# config t
se-10-0-0-0(config)# ccn application autoattendant
se-10-0-0-0(config-application)# description "Release 1 AA"se-10-0-0-0(config-application)# end
se-10-0-0-0(config)# exitRelated Commands
Configures the CCN applications, such as voice mail and auto attendant.
Displays the CCN application details.
Parameter names can be viewed using the show ccn application command.