Guest

Cisco Unity

Use the Installation Guide That Matches the Cisco Unity 4.0(5) or Later Configuration

 Feedback

Table Of Contents

Use the Installation Guide That Matches the Cisco Unity 4.0(5) or Later Configuration

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 2003/2000 (Without Failover)

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 5.5 (Without Failover)

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (Without Failover)

Installation Guide for Cisco Unity 4.0(5) and Later with IBM Lotus Domino (Without Failover)

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 5.5 (With Failover Configured)

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

Installation Guide for Cisco Unity 4.0(5) and Later with IBM Lotus Domino (With Failover Configured)


Use the Installation Guide That Matches the Cisco Unity 4.0(5) or Later Configuration


Revised March 6, 2006

There are eight versions of the Cisco Unity installation guide, each containing instructions for a specific configuration. Use the following list to confirm that you are using the correct version of the guide for the Cisco Unity version 4.0(5) or later configuration that you are installing.

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 2003/2000 (Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging system running version 4.0(5) or later, and using Exchange 2003 or Exchange 2000 as the partner Exchange server. The system is not configured for Cisco Unity failover.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2003 and/or Exchange 2000, regardless of whether mailboxes will also be homed in Exchange 5.5.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum2k3nf/5ue2k3nf.html.

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 5.5 (Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging system running version 4.0(5) or later, and using Exchange 5.5 as the partner Exchange server. The system is not configured for Cisco Unity failover.

Use this guide only when all subscriber mailboxes will be homed in Exchange 5.5.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum55nf/5ue55nf.html.

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (Without Failover)

This version of the guide is for a Cisco Unity Voice Messaging system running version 4.0(5) or later, and using Exchange 2003 or Exchange 2000 as the message store. The system is not configured for Cisco Unity failover.

The guide is available at http://www.cisco.com/en/US/products/sw/voicesw/ps2237/
products_installation_guide_book09186a008041fc78.html
.

Installation Guide for Cisco Unity 4.0(5) and Later with IBM Lotus Domino (Without Failover)

This version of the guide is for a Cisco Unity Unified Messaging or Voice Messaging system running version 4.0(5) or later, and using Domino as the message store. The system is not configured for Cisco Unity failover.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cudnf/5udnf.html.

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging system running version 4.0(5) or later, and using Exchange 2003 or Exchange 2000 as the partner Exchange server. The system is also configured for Cisco Unity failover.

Use this guide when any Cisco Unity subscriber mailboxes will be homed in Exchange 2003 and/or Exchange 2000, regardless of whether mailboxes will also be homed in Exchange 5.5.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum2k3fo/5ue2k3f.html.

Installation Guide for Cisco Unity 4.0(5) and Later Unified Messaging with Microsoft Exchange 5.5 (With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging system running version 4.0(5) or later, and using Exchange 5.5 as the partner Exchange server. The system is also configured for Cisco Unity failover.

Use this guide only when all subscriber mailboxes will be homed in Exchange 5.5.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cueum55fo/5ue55f.html.

Installation Guide for Cisco Unity 4.0(5) and Later Voice Messaging with Microsoft Exchange 2003/2000 (With Failover Configured)

This version of the guide is for a Cisco Unity Voice Messaging system running version 4.0(5) or later, and using Exchange 2003 or Exchange 2000 as the message store. The system is also configured for Cisco Unity failover.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cuevm2kfo/5ve2kf.html.

Installation Guide for Cisco Unity 4.0(5) and Later with IBM Lotus Domino (With Failover Configured)

This version of the guide is for a Cisco Unity Unified Messaging or Voice Messaging system running version 4.0(5) or later, and using Domino as the message store. The system is also configured for Cisco Unity failover.

The guide is available at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/405/installation/guide/cudfo/5udf.html.