Table Of Contents

Monitoring the Provisioning Status of an SRSV-CUE Device

Monitoring the Status of the Provisioning Cycle

After the Provisioning is Finished

Monitoring the Provisioning Status of an SRSV-CUE Device

---

•Monitoring the Status of the Provisioning Cycle

•After the Provisioning is Finished

Monitoring the Status of the Provisioning Cycle

While the Cisco Unified SRSV system is actively provisioning the SRSV-CUE devices, you can examine the realtime status of the provisioning process by clicking Monitor > Provisioning Status. If you manually started the provisioning cycle, the system automatically displays the provisioning monitor page.

The system automatically refreshes the Provisioning Status page until all the selected sites have finished the provisioning cycle. During this time, you can navigate away from this page and return later to review the updated status. If the provisioning has not finished, the page will display the updated status for individual sites.

•Site—The name of the site being provisioned.

•Progress—The current state of provisioning. Can be one of the following: not started, in progress, or complete.

•Result—Indicates the outcome of the provisioning process for the site. Can be either success or failed.

After the Provisioning is Finished

You can review the outcome of the provision by clicking Reports > Site Provisioning History after the provisioning is complete. These results cannot be cleared or deleted.

The Site Provisioning History page displays every site known to the SRSV-UMG device. For each site, there are two provisioning results displayed:

•Last Attempt. Indicates the outcome of the most recent provisioning attempt made by the SRSV-UMG device for that site. Results can include never, success, failed, or disabled.

–Never indicates that the site is enabled for provisioning, but has never been provisioned. This can occur if the site is disabled for provisioning, or if the site is newly created and neither the manual nor scheduled provisioning has occurred yet.

–If the provisioning is successful, the report shows the date and time (relative to the SRSV-UMG device) when the provisioning was attempted.

–If the provisioning failed, the system generates an alert and increments the failed provisioning status count on the dashboard. To see the alert details, click Reports > Alert History.

---

Note Site provisioning failures are severe. We recommend that you correct the failure as soon as possible.

---

–Disabled indicates that the site was administratively disabled for provisioning during the last provisioning cycle. You can enable a disabled site on the Site Profile page.

•Last Successful. Indicates the last time that the SRSV-UMG device successfully provisioned the SRSV-CUE device. Can be either success or never. If the status is success, the report shows the date and time (relative to the SRSV-UMG device) when the provisioning was completed.

•Voicemail Subscribers. Displays the number of subscribers that have been provisioned on the SRSV-CUE device by the SRSV-UMG device. This number should be consistent with the number of Cisco Unity Connection voicemail subscribers located at the site.

After provisioning, we recommend that you review the provisioning configuration on the SRSV-CUE device.

Related Topics

•See the Viewing the Site Provisioning History Report section in the Viewing Reports module to learn how to generate the Site Provisioning report.

•See the Viewing the Alert History Report section in the Viewing Reports module to learn how to generate the Alert History report.

•See the System Alerts section in the Viewing Reports module for a list of all the alert descriptions.