Table Of Contents

Viewing Branch Voicemail Servers

Viewing Branch Voicemail Servers

---

Procedure

---

Step 1 Log in to the Cisco UMG GUI. See the Logging In to the Cisco UMG Graphical User Interface (GUI) module.

Step 2 Select Configure > Branch Voicemail Servers.

The system displays the Branch Voicemail Servers page, including the following information:

Parameter	Description
Hostname	Hostname of the SRSV-CUE device.
IP Address	IP address of the SRSV-CUE device.
Module Type	Type of Cisco network module hardware on which the SRSV-CUE device resides. Can be AIM2, NME, ISM-SRE or SM-SRE.
Memory	Amount of memory installed in the SRSV-CUE device.
Serial Number	Manufacturing serial number of the SRSV-CUE device.

Step 3 To see a different number of branch voicemail servers on each page, on the top right, choose another number from the drop-down box and click Go. You can choose to see 10, 25, 50, 100, or 500 branch voicemail servers.

Step 4 To move to another page, use the left and right arrow buttons on the bottom right, or enter another page number and press Enter.

Step 5 To add a branch voicemail server, click Add.

The system displays the Add Branch Voicemail Server Wizard. See Using the Add Branch Voicemail Server Wizard to Add an SRSV-CUE Device.

Step 6 To change a branch voicemail server, see Changing a Branch Voicemail Server.

Step 7 To remove a branch voicemail server, see Removing a Branch Voicemail Server.

---