Table Of Contents

Viewing Sites

Viewing Sites

---

Procedure

---

Step 1 Log in to the Cisco UMG GUI. See the Logging In to the Cisco UMG Graphical User Interface (GUI) module.

Step 2 Select Configure > Sites.

The system displays the Sites page, including the following information:

Table 8 Site Parameter Information

Parameter	Description
Site	Name of the Cisco Unified SRST reference as configured on the Cisco Unified Communications Manager.
Provisioning	Indicates whether the SRSV-UMG device is allowed to provision the SRSV-CUE device at this site. The initial value for this corresponds to the value of the Site Provisioning Enable Default parameter that is configured under the Central Call Agent profile.
Central Call Agent	Call agent that is managing this site.
Central Voicemail Server	Cisco Unity Connection voicemail server associated with this site. When a site is created, this value is initially set to the value of the Default Voicemail Server parameter that is configured under the Central Call Agent profile.
Branch Voicemail Server	SRSV-CUE device that is associated with the site. Shown as unassigned if an SRSV-CUE device has not been associated with the site.

Step 3 To see a different number of sites on each page, on the top right, choose another number from the drop-down box and click Go. You can choose to see 10, 25, 50, 100, or 500 sites.

Step 4 To move to another page, use the left and right arrow buttons on the bottom right, or enter another page number and press Enter.

Step 5 To change information for a single site, see Changing Information for a Single Site.

Step 6 To change information for multiple sites, see Changing Information for Multiple Sites at Once.

Step 7 To provision a site, see Manually Provisioning an SRSV-CUE Device.

---