Table Of Contents
Regulatory Compliance and Safety Information for the Cisco Unified Communications 500 Series for Small Business
Safety
Agency Approvals and Standards
Restricted Area
Operating Conditions for Canada
Operating Conditions for Australia and the European Community
Operating Conditions for the United Kingdom
Electromagnetic Compatibility
Country Approvals and Standards
CISPR 22 Class A Warning
FCC Part 15 Notice
Class A Notice for Canada
Equipment Attachment Limitations
Statement 191—VCCI Class A Warning for Japan
Statement 256—Class A Warning for Hungary
Statement 294—Class A Warning for Korea
Telecommunications
Country Approvals and Standards
FCC Part 68 Notice
Universal Service Order Code Jacks
Port Approvals—FCC and Industry Canada
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
Declaration of Conformity Statements
California Perchlorate Contamination Prevention Act—Title 22, California Code of Regulations, Chapter 33
Translated Safety Warnings
Statement 1071—Warning Definition
Statement 1—Power Disconnection Warning
Statement 23—ISDN Connection Warning
Statement 43—Jewelry Removal Warning
Statement 94—Wrist Strap Warning
Statement 198—Power Failure Warning
Statement 248—Unit Mounting Warning
Statement 343—Before Making Telecommunication Network Connection
Statement 1001—Work During Lightning Activity
Statement 1004—Installation Instructions
Statement 1005—Circuit Breaker
Statement 1006—Chassis Warning for Rack-Mounting and Servicing
Statement 1007—TN and IT Power Systems
Statement 1017—Restricted Area
Statement 1019—Main Disconnecting Device
Statement 1021—SELV Circuit
Statement 1024—Ground Conductor
Statement 1026—WAN Port Static Shock
Statement 1029—Blank Faceplates and Cover Panels
Statement 1037—Uninsulated Wires or Terminals
Statement 1038—Telephone Use During an Electrical Storm
Statement 1040—Product Disposal
Statement 1044—Port Connections
Statement 1046—Installing or Replacing the Unit
Statement 1072—Shock Hazard from Interconnections
Statement 1073—No User-Serviceable Parts
Obtaining Documentation, Obtaining Support, and Security Guidelines
Regulatory Compliance and Safety Information for the Cisco Unified Communications 500 Series for Small Business
This document provides domestic and international regulatory compliance and safety information for the Cisco Unified Communications 500 Series for Small Business (Cisco Unified 500 Series).
The Cisco Unified 500 Series is an IP telephony solution that supports PSTN trunks, IP trunks, analog stations, and integrated voice mail and auto-attendant (AA).
Note 
Package names, bundles, and ordering numbers for different configurations of the Cisco Unified 500 Series, with selected interface cards or services, are indicated by changing the last digit of the marketing designation within the range of 0 to 9. These changed numbers do not affect the model name, and they do not appear on the bottom homologation label with the approvals. The basic approved chassis of the Cisco Unified 500 Series is not changed or modified in any way.
Use this document in conjunction with the quick start guide that accompanies your Cisco Unified Communications 500 Series platform and other documentation for the Cisco Unified Communications 500 Series available online.
This document contains the following sections:
•Safety
•Electromagnetic Compatibility
•Telecommunications
•Declaration of Conformity Statements
•California Perchlorate Contamination Prevention Act—Title 22, California Code of Regulations, Chapter 33
•Translated Safety Warnings
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Safety
This section describes safety conditions and operating conditions for the Cisco Unified 500 Series. It contains the following:
•Agency Approvals and Standards
•Restricted Area
•Operating Conditions for Canada
•Operating Conditions for Australia and the European Community
•Operating Conditions for the United Kingdom
Warning This equipment will be inoperable when mains power fails. Statement 198
Warning High leakage current—permanent earth connection essential before making Telecommunication Network Connection. Statement 343
Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021
Warning Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Statement 1037
Warning Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Statement 1038
Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection.
10/100/1000 Ethernet Statement 1044
Warning Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if interconnections are made using uninsulated exposed metal contacts, conductors, or terminals. Avoid using such interconnection methods, unless the exposed metal parts are located within a restricted access location and users and service people who are authorized within the restricted access location are made aware of the hazard. A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. Statement 1072
Warning No user-serviceable parts inside. Do not open. Statement 1073
Agency Approvals and Standards
This section lists the following agency approvals and standards for safety:
•CSA Certified to Information Technology Equipment - Safety - Part 1: General Requirements, CSA CAN/CSA-C22.2 No. 60950-1-03, First Edition and UL 60950-1, First Edition
•Self-certified compliant to Australian Standard AS/NZS 60950.1:2003
•CSA CB certificate/Test Report to EN and IEC 60950-1 with all country deviations and national deviations
Restricted Area
The following warning is applicable only in Scandinavian countries.
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017
Operating Conditions for Canada
In addition to the warnings and safety guidelines listed in the "Translated Safety Warnings" section in this document, the following operating conditions apply to the Cisco Unified 500 Series used in Canada:
•The Canadian Department of Communications label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective operational and safety requirements. The Department does not guarantee that the equipment will operate to the user's satisfaction.
•Before installing the equipment, users should ensure that it is permissible to connect the equipment to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.
•Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
•Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Operating Conditions for Australia and the European Community
The warnings and safety guidelines listed in the "Translated Safety Warnings" section in this document apply to the Cisco Unified 500 Series used in Australia and the European Community.
Operating Conditions for the United Kingdom
In addition to the warnings and safety guidelines listed in the "Translated Safety Warnings" section in this document, the following warnings and safety guidelines apply to the Cisco Unified 500 Series used in the United Kingdom:
•The Cisco Unified 500 Series is designed to meet the requirements of the interim common technical regulation 3 (CTR3) for Basic Rate Access.
•Interconnection directly, or by way of other apparatus, of ports marked:
"Safety Warning—See instructions for use"
with ports marked or not so marked may produce hazardous conditions on the network, and advice should be obtained from a competent engineer before such a connection is made.
•The BRI connector must be hardwired permanently to the S-reference connection point by using a connect one-time-only, nonremovable plug (RJ-45 with the latch tab removed).
•The ports marked "10BaseT," "Console," and "ISDN" have a safety warning applied to them as follows:
"These ports do not provide isolation sufficient to satisfy the requirement of EN41003; apparatus connected to these ports should either have been approved to EN41003 or have previously been evaluated against B5E301 British Telecommunications plc (Post Office) Technical Guides 2 or 26 and given permission to attach; any other usage will invalidate any approval given to this apparatus."
Other usage will invalidate any approval given to this apparatus if as a result it ceases to comply with EN41003:1993.
•This apparatus must be connected to a main socket outlet with a protective earth contact.
•Connection of power supply: The Cisco Unified 500 Series is intended for use when supplied with power from a supply providing 100 to 240 VAC, 50 to 60 Hz, up to 0.5A.
Electromagnetic Compatibility
This section describes electromagnetic compatibility (EMC) compliance conditions for the Cisco Unified 500 Series. It contains the following:
•Country Approvals and Standards
•CISPR 22 Class A Warning
•FCC Part 15 Notice
•Class A Notice for Canada
•Statement 191—VCCI Class A Warning for Japan
•Statement 256—Class A Warning for Hungary
•Statement 294—Class A Warning for Korea
Country Approvals and Standards
This section lists the following country approvals and standards for EMC:
•Emissions for the Cisco Unified 500 Series—47CFR15 Class A (FCC); CISPR22 Class A; EN55022 Class A; AS/NZS 3548 Class A (ACA); ICES-003 Class A (Industry Canada); V-3 Class A (VCCI); EN61000-3-2; EN61000-3-3; EN300386 Class A; KN 22 (Korea)
•Immunity for Cisco Unified 500 Series—EN55024, EN50082-1, and EN61000-6-1 (including EN 61000-4-2 Electrostatic Discharge; EN 61000-4-3 Radiated Susceptibility; EN 61000-4-4 Electrical Fast Transients; EN 61000-4-5 Power & Signal Line Surges; EN 61000-4-6 Injected RF Swept Immunity; EN61000-4-11 Voltage Dips + Sags); EN300386
CISPR 22 Class A Warning
Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
FCC Part 15 Notice
Cisco Unified 500 Series complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. These devices may not cause harmful interference.
2. These devices must accept any interference received, including interference that may cause undesired operation.
Modifying the equipment without authorization from Cisco may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Class A Notice for Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Equipment Attachment Limitations
The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational, and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirement Documents. The Department does not guarantee the equipment will operate to the user's satisfaction.
Note This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company's inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly (telephone extension cord). The customer should be aware that compliance with the above conditions might not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate.
Statement 191—VCCI Class A Warning for Japan
|
Warning
|
This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.
|
|
|
Statement 256—Class A Warning for Hungary
|
Warning
|
This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used.
|
|
|
Statement 294—Class A Warning for Korea
|
Warning
|
This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type.
|
|
|
Telecommunications
This section describes telecommunications compliance conditions for the Cisco Unified 500 Series. It contains the following:
•Country Approvals and Standards
•FCC Part 68 Notice
•Universal Service Order Code Jacks
•Port Approvals—FCC and Industry Canada
•Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
Country Approvals and Standards
This section lists the following agency approvals and standards for telecommunications:
•USA—TIA-968-A
•Canada—CS-03
•European Union—RTTE Directive 5/99
•Argentina—TBR 21
•Australia—AS/ACIF-S002, AS/ACIF-S003, AS/ACIF-S016, AS/ACIF-S031, AS/ACIF-S038, AS/ACIF-S043, ACIF-C559
•Brazil—225-540-784, 225-540-788, CTR3, 225-100-717 Edition 3, NET 001/92 1990
•China—ITU-G.992.1, ITU-G.991.2, CTR3, ITU I.431 1993
•Hong Kong—HKTA-2011, HKTA-2013, HKTA-2014, HKTA-2017, HKTA-2033
•India—I-DCA-18-2, IR-I/TCP-01/02, IR-I/PRI-01/02
•Israel—TBR21
•Japan—Technical condition (DoC acceptance in process)
•Korea—TIA-968-A/RRL 2005-96
•Mexico—TIA-968-A accepted
•New Zealand—PTC-217, PTC-220, PTC 270/272, CTR3, ACIF S016
•Singapore—IDA TS PSTN 1, IDA TS ISDN 1, IDA TS ISDN 3
•South Africa—DPT-TE-001
•Taiwan—PSTN01
FCC Part 68 Notice
This equipment complies with Part 68 of the FCC rules. On the bottom of the chassis is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the operation of this equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.
Normally, this equipment will be used in conjunction with FCC registered equipment that limits the Encoded Analog Content that provides the required Billing Protection. If the connected equipment is not of this type, an affidavit must be supplied to the telephone company where the network connection is to be made. The affidavit is to be notarized, and is to be filed at least ten days before the initial connection.
The facility interface and service order codes are shown in Table 1.
Table 1 Cisco Unified 500 Series Facility Interface and Service Order Codes
Interface Type
|
Facility Interface Code (FIC)
|
Service Order Code (SOC)
|
Jack Type (USOC)
|
ADSL
|
Metallic
|
—
|
RJ-11C
|
SHDSL
|
Metallic
|
—
|
RJ-11C
RJ-14C
|
BRI - S/T
|
02IS5
|
6.0N
|
RJ-49C via NT1
|
BRI-U
|
02IS5
|
6.0N
|
RJ-49
|
T1 data
|
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
|
6.0N
|
RJ-48C
|
T1 voice
|
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN,
04DU9-1ZN
|
6.0Y
|
RJ-48C
|
FXO1
|
02LS2
02GS2
|
—
|
RJ-11C
RJ-21X
|
CAMA1
|
02RV2-0
|
—
|
RJ-11C
RJ-21X
|
DID (Reverse battery)
|
02RV2-T
|
9.0F (AS.2)
|
RJ-11C
RJ-21X
|
E&M tie trunk
|
TL11E
TL12E
TL31E
TL32E
|
9.0F
|
RJ-2EX
RJ-2FX
RJ-2GX
RJ-2HX
|
Analog modem1
|
—
|
—
|
RJ-11C
|
DSU 56K
|
04DU5-24
04DU5-48
04DU5-96
04DU5-19
04DU5-38
04DU5-56
04DU5-64
04DU5-56B
|
6.0F
|
RJ-48S
|
Universal Service Order Code Jacks
The following modular cards can be used with the Cisco Unified 500 Series, according to customer selections and preferences. These cards are fully interchangeable, compatible, and approved for use with Cisco communications equipment. For approvals, refer to the Cisco Corporate Compliance Approval Search at the following website:
http://www.cisco-compliance.com/compliance.asp
Table 2 lists the Universal Service Order Code Jacks (USOC) jacks and WAN interface cards used by Cisco Unified 500 Series.
Table 2 USOC Jacks for the Cisco Unified 500 Series and WAN Interface Cards
Cisco Product Number
|
Facility Interface Code
|
Service Order Code
|
Jack Type
|
WIC-1B-S/T-V3
|
02IS5
|
6.0N
|
RJ-48C
|
WIC-1B-U-V2
|
02IS5
|
6.0N
|
RJ-49C
|
WIC-1DSU-T1-V2
|
04DU9-BN/DN
|
6.0N
|
RJ-48C
|
WIC-1DSU-56K4
|
04DU5-56
|
6.0N
|
R3-48S
|
WIC-1ADSL
|
Metallic
|
6.0N
|
RJ-11
|
WIC-1ADSL-DG
|
Metallic
|
6.0N
|
RJ-11
|
WIC-1ADSL-I-DG
|
Metallic
|
6.0N
|
RJ-11
|
WIC-1SHDSL
|
Metallic
|
6.0N
|
RJ-11
|
WIC-1AM
|
02LS2
|
7.0Y
|
RJ-11
|
WIC-2AM
|
02LS2
|
7.0Y
|
RJ-11
|
VWIC-1MFT-T1
|
04DU9-BN/DN
|
6.0N
|
RJ-48C
|
VWIC-2MFT-T1
|
04DU9-BN/DN
|
6.0N
|
RJ-48C
|
VWIC-2MFT-T1-DI
|
04DU9-BN/DN
|
6.0N
|
RJ-48C
|
VWIC-1MFT-E1
|
N/A
|
N/A
|
RJ-48
|
VWIC-1MFT-G703
|
N/A
|
N/A
|
RJ-48
|
VWIC-2MFT-E1
|
N/A
|
N/A
|
RJ-48
|
VWIC-2MFT-E1-DI
|
N/A
|
N/A
|
RJ-48
|
VWIC-2MFT-G703
|
N/A
|
N/A
|
RJ-48
|
Port Approvals—FCC and Industry Canada
Table 3 lists the FCC and Industry Canada approvals for the Cisco Unified 500 Series ports.
Table 3 Cisco Unified 500 Series Port Approvals—FCC and Industry Canada
Cisco Product Number
|
Port
|
|
Industry Canada Approval Number
|
UC520-16
|
Chassis
|
US:5B1IS01B0225
|
IC:2461B-0407
|
UC520-48
|
Chassis
|
US:5B1IS01B0225
|
IC:2461B-0407
|
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
English:
|
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
|
[Bulgarian]:
|
|
[Czech]:
|
|
Dansk
[Danish]:
|
Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.
|
Deutsch
[German]:
|
Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
|
Eesti
[Estonian]:
|
See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.
|
Español
[Spanish]:
|
Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.
|
[Greek]:
|
|
Français
[French]:
|
Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.
|
Íslenska
[Icelandic]:
|
Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.
|
Italiano
[Italian]:
|
Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
|
Latviski
[Latvian]:
|
|
[Lithuanian]:
|
|
Nederlands
[Dutch]:
|
Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.
|
Malti
[Maltese]:
|
|
Magyar
[Hungarian]:
|
|
Norsk
[Norwegian]:
|
Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.
|
Polski
[Polish]:
|
|
Português
[Portuguese]:
|
Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.
|
[Romanian]:
|
Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC.
|
Slovensko
[Slovenian]:
|
Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.
|
Slovensky
[Slovak]:
|
Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC.
|
Suomi
[Finnish]:
|
|
Svenska
[Swedish]:
|
|
Declaration of Conformity Statements
The Declaration of Conformity statements for this product can be found at the following URL:
http://www.ciscofax.com
Note If you still have questions regarding the compliance of these products or you cannot find the information you are looking for, please send an e-email request to complianceinfo@cisco.com.
California Perchlorate Contamination Prevention Act—Title 22, California Code of Regulations, Chapter 33
The battery inside this product might contain perchlorate, a known hazardous substance, so special handling and disposal of this product might be necessary. For more information about perchlorate and best management practices for perchlorate-containing substances, see http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.
Translated Safety Warnings
This section contains the translations of the following warning statements that appear in the hardware installation documentation and quick start guide for the Cisco Unified 500 Series:
•Statement 1071—Warning Definition
•Statement 1—Power Disconnection Warning
•Statement 23—ISDN Connection Warning
•Statement 43—Jewelry Removal Warning
•Statement 94—Wrist Strap Warning
•Statement 198—Power Failure Warning
•Statement 248—Unit Mounting Warning
•Statement 343—Before Making Telecommunication Network Connection
•Statement 1001—Work During Lightning Activity
•Statement 1004—Installation Instructions
•Statement 1005—Circuit Breaker
•Statement 1006—Chassis Warning for Rack-Mounting and Servicing
•Statement 1007—TN and IT Power Systems
•Statement 1017—Restricted Area
•Statement 1019—Main Disconnecting Device
•Statement 1021—SELV Circuit
•Statement 1024—Ground Conductor
•Statement 1026—WAN Port Static Shock
•Statement 1029—Blank Faceplates and Cover Panels
•Statement 1037—Uninsulated Wires or Terminals
•Statement 1038—Telephone Use During an Electrical Storm
•Statement 1040—Product Disposal
•Statement 1044—Port Connections
•Statement 1046—Installing or Replacing the Unit
•Statement 1072—Shock Hazard from Interconnections
•Statement 1073—No User-Serviceable Parts
Statement 1071—Warning Definition
|
Warning
|
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
|
Waarschuwing
|
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.
BEWAAR DEZE INSTRUCTIES
|
Varoitus
|
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
|
Attention
|
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
|
Warnung
|
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
|
Avvertenza
|
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
|
Advarsel
|
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
|
Aviso
|
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
|
¡Advertencia!
|
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
|
Varning!
|
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
SPARA DESSA ANVISNINGAR
|
|
|
|
|
|
|
|
|
|
|
Aviso
|
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.
GUARDE ESTAS INSTRUÇÕES
|
Advarsel
|
VIGTIGE SIKKERHEDSANVISNINGER
Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.
GEM DISSE ANVISNINGER
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Statement 1—Power Disconnection Warning
|
Warning
|
Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord.
|
Waarschuwing
|
Voordat u aan een systeem werkt dat een aan/uit schakelaar heeft, dient u de stroomvoorziening UIT te schakelen en de stekker van het netsnoer uit het stopcontact te halen.
|
Varoitus
|
Ennen kuin teet mitään sellaiselle järjestelmälle, jossa on kaksiasentokytkin, katkaise siitä virta ja kytke virtajohto irti.
|
Attention
|
Avant de travailler sur un système équipé d'un commutateur marche-arrêt, mettre l'appareil à l'arrêt (OFF) et débrancher le cordon d'alimentation.
|
Warnung
|
Bevor Sie an einem System mit Ein/Aus-Schalter arbeiten, schalten Sie das System AUS und ziehen das Netzkabel aus der Steckdose.
|
Avvertenza
|
Prima di lavorare su un sistema dotato di un interruttore on/off, spegnere (OFF) il sistema e staccare il cavo dell'alimentazione.
|
Advarsel
|
Slå AV strømmen og trekk ut strømledningen før det utføres arbeid på et system som er utstyrt med en av/på-bryter.
|
Aviso
|
Antes de começar a trabalhar num sistema que tem um interruptor on/off, DESLIGUE a corrente eléctrica e retire o cabo de alimentação da tomada.
|
¡Advertencia!
|
Antes de utilizar cualquier sistema equipado con interruptor de Encendido/Apagado (ON/OFF), cortar la alimentación y desenchufar el cable de alimentación.
|
Varning!
|
Slå AV strömmen och dra ur nätsladden innan du utför arbete på ett system med strömbrytare.
|
|
|
|
|
|
|
|
|
Statement 23—ISDN Connection Warning
|
Warning
|
The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact. Do not attempt to tamper with or open any public telephone operator (PTO)-provided equipment or connection hardware. Any hardwired connection (other than by a nonremovable, connect-one-time-only plug) must be made only by PTO staff or suitably trained engineers.
|
Waarschuwing
|
De verbinding met ISDN (Integrated Services Digital Network = Digitaal netwerk met geïntegreerde faciliteiten) wordt beschouwd als een spanningsbron die ontoegankelijk dient te zijn voor gebruikers. Gebruikers dienen geen poging te doen om door de openbare telefoondienst (PTT) verstrekte apparatuur of aansluitingshardware te openen of ermee te knoeien. Alle vastbedrade verbindingen (behalve die verbindingen die gemaakt zijn door een niet-verwijderbare, slechts eenmaal te verbinden stekker) dienen slechts door PTT-personeel of door daartoe opgeleide ingenieurs gemaakt te worden.
|
Varoitus
|
ISDN-liitäntää pidetään jännitelähteenä, jonka kanssa käyttäjän ei tulisi päästä kosketuksiin. Käyttäjien ei tulisi yrittää peukaloida tai avata laitteita tai liittimiä, jotka kuuluvat yleiselle puhelinlaitokselle (PTO). Ainoastaan yleisen puhelinlaitoksen henkilökunnan tai ammattitaitoisten teknikoiden tulee tehdä kaapeliliitännät (lukuun ottamatta kiinteitä pistokkeita, jotka yhdistetään ainoastaan yhden kerran).
|
Attention
|
La connexion du réseau numérique intégré (Integrated Services Digital Network ou ISDN) constitue une source de tension qui ne doit pas être accessible à l'utilisateur. Les utilisateurs ne doivent jamais tenter de modifier ni même d'ouvrir un matériel fourni par une compagnie de téléphone public, ou le matériel de connexion. Toute connexion câblée (autre que celles établies par une prise non démontable à connexion unique) ne doit être effectuée que par le personnel de la compagnie de téléphone ou par des techniciens proprement formés.
|
Warnung
|
Die ISDN-Verbindung gilt als eine Spannungsquelle, die dem Anwender unzugänglich sein sollte. Anwender sollten nicht versuchen, sich an der von den Anbietern öffentlicher TK-Dienste gelieferten Ausstattung oder Verbindungs-Hardware zu schaffen zu machen oder sie zu öffnen. Alle festverdrahteten Verbindungen (mit Ausnahme der Verbindungen mit einem nicht abnehmbaren, nur einmal anzuschließenden Stecker) sind von Mitarbeitern des TK-Anbieters oder von entsprechend geschulten Technikern herzustellen.
|
Avvertenza
|
Il collegamento ISDN (Integrated Services Digital Network - Rete digitale a servizi integrati) viene considerato come una fonte di tensione che dovrebbe essere inaccessibile al contatto dell'utente. Gli utenti non devono né manomettere né provare ad aprire le apparecchiature o i dispositivi di collegamento forniti dalla società telefonica. Qualsiasi collegamento cablato (ad eccezione di una spina non rimovibile, da installare una sola volta) deve essere eseguito esclusivamente da un dipendente della società telefonica o da tecnici specializzati.
|
Advarsel
|
ISDN-koblingen betraktes som en spenningskilde som bør være utilgjengelig for brukeren. Brukere bør ikke klusse med eller åpne utstyr eller tilkoblingsmateriale som er utstyrt av Telenor. Eventuelle faste installasjoner (bortsett fra koblinger som er foretatt med et støpsel for engangsbruk og som ikke kan fjernes) må kun utføres av Telenor-montører.
|
Aviso
|
A conexão RDIS (Rede Digital com Integração de Serviços) é interpretada como uma fonte de tensão que deverá ser inacessível ao utilizador. Os utilizadores não deverão tentar violar qualquer equipamento ou conexão de serviço telefónico público. Qualquer conexão de rede de fios (para além daquela estabelecida por uma ficha não-removível de ligação única), deverá apenas ser efectuada por pessoal dos serviços telefónicos ou engenheiros devidamente treinados.
|
¡Advertencia!
|
La conexión al circuito RDSI (Red Digital de Servicios Integrados) se considera como una fuente de voltaje con la cual el usuario no debe entrar en contacto. Los usuarios deberán evitar manipular indebidamente, o abrir, los equipos o hardware de conexión proporcionados por cualquier compañía operadora de la red pública de telefonía. Las conexiones de cable rígido que sean necesarias (excepto las de clavija no desmontable de un solo uso) deberán ser realizadas exclusivamente por personal de la entidad operadora de la red pública de telefonía, o por personal técnico adecuadamente capacitado.
|
Varning!
|
ISDN-anslutningen betraktas som en spänningskälla och bör inte vara åtkomlig för användaren (ISDN: Integrated Services Digital Network = digitalt flertjänstnät). Användare får inte manipulera eller söka öppna utrustning eller anslutningsdon som tillhandahållits av telefonbolag (PTO-produkter). Anslutning av ledningar (med undantag av en icke löstagbar propp för engångsanslutning) får endast utföras av PTO-anställda eller lämpligt utbildade tekniker.
|
|
|
|
|
|
|
|
|
Statement 43—Jewelry Removal Warning
|
Warning
|
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals.
|
Waarschuwing
|
Alvorens aan apparatuur te werken die met elektrische leidingen is verbonden, sieraden (inclusief ringen, kettingen en horloges) verwijderen. Metalen voorwerpen worden warm wanneer ze met stroom en aarde zijn verbonden, en kunnen ernstige brandwonden veroorzaken of het metalen voorwerp aan de aansluitklemmen lassen.
|
Varoitus
|
Ennen kuin työskentelet voimavirtajohtoihin kytkettyjen laitteiden parissa, ota pois kaikki korut (sormukset, kaulakorut ja kellot mukaan lukien). Metalliesineet kuumenevat, kun ne ovat yhteydessä sähkövirran ja maan kanssa, ja ne voivat aiheuttaa vakavia palovammoja tai hitsata metalliesineet kiinni liitäntänapoihin.
|
Attention
|
Avant d'accéder à cet équipement connecté aux lignes électriques, ôter tout bijou (anneaux, colliers et montres compris). Lorsqu'ils sont branchés à l'alimentation et reliés à la terre, les objets métalliques chauffent, ce qui peut provoquer des blessures graves ou souder l'objet métallique aux bornes.
|
Warnung
|
Vor der Arbeit an Geräten, die an das Netz angeschlossen sind, jeglichen Schmuck (einschließlich Ringe, Ketten und Uhren) abnehmen. Metallgegenstände erhitzen sich, wenn sie an das Netz und die Erde angeschlossen werden, und können schwere Verbrennungen verursachen oder an die Anschlußklemmen angeschweißt werden.
|
Avvertenza
|
Prima di intervenire su apparecchiature collegate alle linee di alimentazione, togliersi qualsiasi monile (inclusi anelli, collane, braccialetti ed orologi). Gli oggetti metallici si riscaldano quando sono collegati tra punti di alimentazione e massa: possono causare ustioni gravi oppure il metallo può saldarsi ai terminali.
|
Advarsel
|
Fjern alle smykker (inkludert ringer, halskjeder og klokker) før du skal arbeide på utstyr som er koblet til kraftledninger. Metallgjenstander som er koblet til kraftledninger og jord blir svært varme og kan forårsake alvorlige brannskader eller smelte fast til polene.
|
Aviso
|
Antes de trabalhar em equipamento que esteja ligado a linhas de corrente, retire todas as jóias que estiver a usar (incluindo anéis, fios e relógios). Os objectos metálicos aquecerão em contacto com a corrente e em contacto com a ligação à terra, podendo causar queimaduras graves ou ficarem soldados aos terminais.
|
¡Advertencia!
|
Antes de operar sobre equipos conectados a líneas de alimentación, quitarse las joyas (incluidos anillos, collares y relojes). Los objetos de metal se calientan cuando se conectan a la alimentación y a tierra, lo que puede ocasionar quemaduras graves o que los objetos metálicos queden soldados a los bornes.
|
Varning!
|
Tag av alla smycken (inklusive ringar, halsband och armbandsur) innan du arbetar på utrustning som är kopplad till kraftledningar. Metallobjekt hettas upp när de kopplas ihop med ström och jord och kan förorsaka allvarliga brännskador; metallobjekt kan också sammansvetsas med kontakterna.
|
|
|
|
|
|
|
|
|
Statement 94—Wrist Strap Warning
|
Warning
|
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.
|
|
