Computer did not get added to the domain
|
- Domain user does not
have sufficient privilege to add the computer to the specified domain.
- Computer cannot reach the specified domain.
- Domain Name provided
does not exist.
- Domain user name
provided is incorrect.
- Domain password
provided is incorrect.
|
- Manually add the
computer to the required domain by providing the valid domain name and
credentials.
- Ensure that the user
has sufficient privileges to add the computer to the domain.
- If the computer cannot reach the domain, manually configure the network.
|
Computer did not get added to the work group
|
Workgroup Name provided does not exist.
|
- Manually add the
computer to the required work group by providing the valid Workgroup name.
- Ensure that the user
has sufficient privileges to add the computer to the workgroup.
- If the computer
network is not configured, manually configure it.
|
Computer Name
|
Invalid criteria
|
Computer name should have a minimum of one and a maximum of 15
characters.
It should not contain special characters other than hyphen (-).
|
Domain Name
|
Invalid criteria
|
Check that the domain name in the spreadsheet is not empty and
that the format is correct.
|
Product Key
|
Invalid criteria
|
Check that when the product key specified in the input file
meets the specified format. Product key should have five blocks, each block
containing five alpha-numeric characters.
|
Computer Name field
|
Invalid value or no value
|
Check for the computer name. If it is not provided, enter the
correct computer name.
|
Default Gateway field.
|
Invalid value or no value
|
Provide the default gateway in the required format
XXX.XXX.XXX.XXX.
|
Destination Data Store Name
|
Invalid value or no value
|
The name of the Destination Host Data store in which the new
virtual machine is to be created.
|
Destination Host IP
|
Invalid value or no value
|
The IP address of the Destination Host in which the new virtual
machine is to be created.
|
Domain User Name field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Domain password field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
DNS Server field
|
Invalid value or no value
|
Provide the DNS Server in the required format XXX.XXX.XXX.XXX.
|
Alternate DNS
|
Invalid value
|
Provide the IP address in the required format XXX.XXX.XXX.XXX.
|
IP Address field
|
Invalid value or no value
|
Provide the IP address in the required format XXX.XXX.XXX.XXX.
|
Golden Template Name
|
Invalid value or no value
|
The name of the golden template from which the customer machine
is to be cloned.
|
Organization Name field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Num NICs
|
Invalid value or no value
|
Provide the number of NICs required based on the host golden
template.
|
NIC Mapping mismatch
|
This error occurs when the wrong number of network adapters are
configured in the VM before you convert it to a golden template. VM deployment
will not be successful if the number of NICs in the template and its
corresponding customization file do not match.
|
Configure the correct number of network adapters.
|
Owner Name field (Applicable for Windows only)
|
Invalid value or no value.
Administrator and
Guest are invalid values.
|
Enter this value if it is not provided.
|
Organization Name field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Organization Location field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Organization State field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Organization Country field
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Product key field (Applicable only for Windows).
|
Invalid value or no value
|
Enter this value if it is not provided.
|
Source Data Store Name field
|
Invalid value or no value
|
The name of the Source DataStore which contains the golden
template to be used.
|
Source Host IP field
|
Invalid value or no value
|
The IP address of the Source Host that contains the golden
template to be used.
|
Subnet mask field
|
Invalid value or no value
|
Provide the subnet mask in the required format XXX.XXX.XXX.XXX.
|
Time Zone Linux Area field (Applicable for Linux only)
|
Invalid value or no value
|
Provide and check the Time Zone area for Linux systems.
|
Time Zone Linux Location"field (Applicable for Linux only)
|
Invalid value or no value
|
Provide and check the Time Zone location for Linux systems
|
Time Zone Windows (Applicable for Windows only)
|
Invalid value or no value
|
Provide and check the Time Zone area for Windows system
|
Windows is not activated
|
The product key provided is not valid.
|
- Open the command
prompt and run the command slmgr /ipk <product key>.
- Open the command
prompt and run the command slmgr - dlv and check if product key is successfully
installed.
- Run the command
slmgr - ato to activate the product key.
|
Windows is not activated
|
The computer cannot connect to the Internet for
activating.
|
- Manually configure
the network to connect the computer to internet.
- Open the command
prompt and run the command slmgr - dlv and check if product key is successfully
installed.
- Run the command
slmgr - ato to activate the product key
|
Windows is not activated
|
Computer is not able to connect to Microsoft product key
activation server due to firewall issues.
|
- Add the proxy in
the LAN settings to connect to Microsoft key activation server.
- Open the command
prompt and run the command slmgr - dlv and check if product key is successfully
installed.
- Run the command
slmgr - ato to activate the product key.
|
Feedback