To navigate to
this page, click the Network Management drawer.
This page launches the Cisco Unified Serviceability application, which
gives menu access for configuring SNMP-associated settings, such as community
strings, users, and notification destinations for V1, V2c, and V3.
Open online help for SNMP configuration from within the Serviceability
You cannot click the Back button on
this page to return to the Unified Intelligence Center Administration console.
To return to the Administration console:
Close the Cisco Unified Serviceability page,
Select Cisco Unified Intelligence Center in the
Navigation drop-down menu at the top right of the screen. Then click
The Unified Intelligence Center SNMP MIBs are
documented in the Administration Console User Guide for Cisco
Unified Intelligence Center. They are not documented in the Online
Unified Intelligence Center SNMP MIBs
The Unified Intelligence Center SNMP sub-agent captures the following in a
Management Information Base. All are scalar objects.
This table contains a list of CUIC servers. An
entry in this table represents a CUIC server in this cluster.
row is created in this table whenever a new server is added to the cluster. A
row is deleted when a server is removed from the cluster.
Host name for the Unified Intelligence Center server as entered
The description of the Unified Intelligence Center application installed on this server,
as entered for the application during installation.
The version number of the Unified Intelligence Center software
installed on the server displayed in the format
This object indicates the starting time for the
Unified Intelligence Center application server.
The time zone where the Unified Intelligence Center server is
The last known status of the application.
of the reporting service:
'inService' = The service
is up and running optimally, accepting connections.
'partialService' = Some of the components comprising the application are
not running; the service is in warning state.
'notresponding' = The service is either shut down or not
'unknown' = The service status is
The URL for the Unified Intelligence Center Administration operations console web server.
This object specifies the notification status to management station, to
disable and alternatively enable outbound notifications on this
An entry in this table describes the Unified Intelligence Center
licensing details. A row is created in this table whenever a Unified license is
installed on a server in this cluster.
This object specifies the type of license
timestamp for when the license was installed and applied.
The timestamp when the license will
name of the Controller node where the license is installed. All other nodes in
the cluster point to the license on the Controller.
This table lists statistics of the Unified Intelligence Center
Reporting nodes. A row is created in this table when new server is being added
to the cluster. A row is deleted when a server is removed from this cluster."
The number of Data Sources configured in the
Unified Intelligence Center Reporting application.
The last known status of the
'running' = Service is running and
can fetch data from data source.
'stopped' = Service is
'unknown' = The status is
The number of historical report definitions
installed on the CUIC application.
A report definition is template
for a report. Each report has an association with a report definition.
The number of real time report definitions
installed on the CUIC application.
The number of historical reports
that are currently running.
The number of historical reports that are currently
waiting to execute.
The total number of historical reports that have
been launched since the server last started.
Number of real time reports currently
The number of real time reports that are currently waiting to be
Number of real time reports run since server last
This table lists Report Scheduler health and
statistics. A row is created in this table whenever the Scheduler Component is
enabled on a server in this cluster.
The status of the reporting scheduler
'running' = Service is running and can
generate a report on execution.
'stopped' = Service is
'unknown' = The status is
The status of the email server:
'running' = Service is running and can send email.
'stopped' = Service is shutdown.
'unknown' = The status
The number of jobs that the scheduler service has completed since the
The number of jobs that the scheduler service is currently running. Note
that this counter is not the number of reports scheduled.
The number of jobs that the scheduler service has
failed to complete successfully.
table gives the status of the Unified Intelligence Center database (cuic_data) and some perfmon
The CUIC database exists on each node in the cluster and
stores reports and configurations. The system replicates each CUIC database to
other servers in a cluster.
A row is created in this table whenever
a server is added to the cluster. A row is deleted when a server is removed
from the cluster.
The status of the database
'running' = The database server is up and
'stopped' = The database server is shutdown.
'unknown' = The database server is
The status of the last replication operation:
'success' = Replication performed successfully.
'unknown' = Failed to get
number megabytes of disk space used. The value is in MB.
The number megabytes of temporary space used. The
value is in MB.
This table describes the Unified Intelligence Center
The unique name of cluster, which helps in
associating a device with the cluster.
Number of Unified Intelligence Center servers in the cluster.
hostname of the first node in the cluster. This is the Controller (publisher)
This table gives information about Users and User Groups.
The number of users that have been created to
access Unified Intelligence Center.
The number of users currently signed in.
The number of rejected login
number of user groups created on this
This table gives information for the data
source from that populates a report.
An entry in this table
describes a data source configured on the Unified Intelligence Center server. A row is created
in this table when a new data source is configured on the server. A row is
deleted when a configured data source is removed from the server.
The name of the data source configured.
The status of the data
'online' = The data source is connected, and
it is online.
'offline' = The data source is
disconnected, and it is offline.
'unknown' = The data
source connectivity status is unknown.
The host name of the database
The data source type:
'mssql' = MS SQL
'informix' = IBM Informix datasource.
'other' = Unknown
MIB Notifications (CUIC TRAPs)
Trap notifications are sent by Unified Intelligence Center when unusual
conditions occur that can potentially affect the functioning of a Unified Intelligence Center
service. Each Notification describes the operation state information of a
service when the condition occurs. Review traps to review information on issues
occurring on the network element without polling for SNMP objects.
Unified Intelligence Center supports a generic trap and raises SNMP traps on the
Database service going
DB Replication failure
Failing to run a scheduled report
notification message identifier assigned by the Unified Intelligence Center application. This
identifier is unique for each different notification but consistent for each
instance of the same notification.
The host name or the fully qualified domain name
of the Unified Intelligence Center server from which this event originated.
The service-specific name of the functional
service that generated this notification.
The service-specific name of the Unified Intelligence Center service
notification message, used to group and correlate similar
The state (not
to be confused with severity) of the notification and potentially the current
state of the functional component that generated the notification.
'raise' = Identifies a
notification received as a result of a health-impacting condition, such as a
process failure. A subsequent clear state notification will follow when the
error condition is resolved.
'clear' = Indicates that
the condition which generated a previous raise notification has been
The severity level of this notification. The severity levels
'emergency'= A devastating failure has occurred;
the system or service is unusable. Immediate operator intervention is required.
'alert' = A devastating failure is imminent that will
render the system unusable. Immediate operator attention is
'critical' = A service-impacting failure is
likely to occur soon; an error has occurred that was not appropriately handled
by the system. Operator attention is needed as soon as possible.
'error' = Contains important operational state information and may
indicate that the system has experienced a temporary impairment or an error
that was appropriately handled by the system. An operator should review the
notification soon to determine if action is needed.
'warning' = Contains important operational state information that may be a
precursor to an error occurrence. An operator should review the notification
soon to determine if action is needed.
Contains health or operational state information that may be pertinent to the
health of the system but does not require the attention of the administrator at
'informational' = Contains interesting
system-level information that is valuable to an administrator, however, the
event itself does not indicate a failure or impairment condition.
'debug' = Provides supplemental information that may be beneficial
toward diagnosing or resolving a problem but does not in itself provide
operational health status.
The date and time that the notification was
generated on the originating device.
The full text of the notification. This text includes a description of
the event that was generated, component state information, and potentially a
brief description of administrative action that may be necessary to correct the
condition that caused the event to occur.
The thread pool information group defines the
set of objects for the Unified reporting engine thread pool. All servers
populate these objects.
The maximum number of threads available to the Unified Intelligence Center web server
thread pool manager.
The number of
threads that are currently running tasks.
This counter is useful
in monitoring performance of the server. If the number of threads is close to
the maximum available, then the next reporting request must wait until a thread
the number of
queued tasks. A task is a job, performed by one or more thread.
number of queued
The EnvInfo group defines the set of objects for
the Runtime tomcat info. All servers populate these objects.
total number of HTTP errors (for example, 401
Unauthorized) encountered by a Unified Intelligence Center web application.
The number of
currently active (in use) sessions for the web application.
percentage of CPU utilized by the Tomcat JVM. This object is for the Unified Intelligence Center
Tomcat JVM object .
The amount of
free dynamic memory in the Unified Intelligence Center Tomcat Java Virtual Machine.
The Tomcat Java Virtual Machine
current total dynamic memory, including free and in-use memory.
The Unified Intelligence Center Tomcat
Java Virtual Machine maximum dynamic size.
The Unified Intelligence Center Tomcat Connector current number of
busy/in-use request processing threads.
The Unified Intelligence Center Tomcat Connector current total
number of request processing threads, including available and in-use threads.
indicates the Connector maximum number of request processing threads. Each
incoming request on a Unified Intelligence Center web page requires a thread for the duration of
that request. If more simultaneous requests are received than can be handled by
the currently available request processing threads, additional threads will be
created up to the configured maximum shown in this counter.