Contents

• Server Configuration Table
• Server Configuration Information for Installation

Server Configuration Table

---

Server Configuration Information for Installation

Note

Cisco recommends that you use the configuration table for saving your entries either on a printed paper or in the PDF document. Be aware that the field values (namely hostname and passwords) that you enter while you are running the installation program are case sensitive. All the fields may not be applicable to your system and network configuration. Unless mentioned otherwise, you can change the values of most fields after the installation using CLI commands.

Attention:

Changes to some of the configuration parameters may result in changes to the licence MAC, and you may have to rehost the Unified CCX license. For information about the configuration parameters, see Unified CCX Licenses.

Table 1 Node Configuration Table

Parameter	Your Entry
Administrator ID Attention: You cannot change the original administrator account user ID; you can create additional administrator accounts. Caution    Do not create administrator IDs (for CLI access or OS administration) that start with "uccx" or "UCCX", because such IDs conflict with system account names that are used internally within the Unified CCX server.
Administrator Password
Application User Name
Application User Password
Country Note    The value you enter is used to generate a Certificate Signing Request (CSR) and self-signed certificates.
DNS Primary
DNS Secondary (optional)
Domain
Gateway Address
Hostname
IP Address
IP Mask
MTU Size Note    Use the same Maximum Transmission Unit (MTU) value for all servers in the cluster.
NIC Duplex Note    This parameter is not displayed if automatic negotiation is used.
NIC Speed Note    This parameter is not displayed if automatic negotiation is used.
NTP Server
Security Password
SMTP Location Note    You must populate this field if you plan to use electronic notification.
Organization Note    The value you enter is used to generate a CSR.
Unit Note    The value you enter is used to generate a CSR.
Location
State Note    The value you enter is used to generate a CSR.
Country Note    The value you enter is used to generate a CSR and self-signed certificates.
Time Zone