Table Of Contents

Monitoring and Maintaining Cisco Unified SRST

Where to Go Next

Monitoring and Maintaining Cisco Unified SRST

---

Revised: July 11, 2008

To monitor and maintain Cisco Unified Survivable Remote Site Telephony (SRST), use the following commands in privileged EXEC mode.

Command	Purpose
Router# show running-config	Displays the configuration.
Router# show call-manager-fallback all	Displays the detailed configuration of all the Cisco Unified IP phones, voice ports, and dial peers of the Cisco Unified SRST Router.
Router# show call-manager-fallback dial-peer	Displays the output of the dial peers of the Cisco Unified SRST Router.
Router# show call-manager-fallback ephone-dn	Displays Cisco Unified IP Phone destination numbers when in call manager fallback mode.
Router# show call-manager-fallback voice-port	Displays output for the voice ports.
Router# show ephone phone	Displays Cisco Unified IP Phone status.
Router# show ephone offhook	Displays Cisco Unified IP Phone status for all phones that are off hook.
Router# show ephone registered	Displays Cisco Unified IP Phone status for all phones that are currently registered.
Router# show ephone remote	Displays Cisco Unified IP Phone status for all nonlocal phones (phones that have no Address Resolution Protocol [ARP] entry).
Router# show ephone ringing	Displays Cisco Unified IP Phone status for all phones that are ringing.
Router# show ephone summary	Displays a summary of all Cisco Unified IP Phones.
Router# show ephone telephone-number phone-number	Displays Unified IP Phone status for a specific phone number.
Router# show ephone unregistered	Displays Unified IP Phone status for all unregistered phones.
Router# show ephone-dn tag	Displays Unified IP Phone destination numbers.
Router# show ephone-dn summary	Displays a summary of all Cisco Unified IP Phone destination numbers.
Router# show ephone-dn loopback	Displays Cisco Unified IP Phone destination numbers in loopback mode.
Router# show voice port summary	Displays a summary of all voice ports.
Router# show dial-peer voice summary	Displays a summary of all voice dial peers.

Where to Go Next

For more information about these commands, see the Cisco Unified SRST and Cisco Unified SIP SRST Command Reference (All Versions).

For additional information, see the "Additional References" section on page 44 in the "Overview of Cisco Unified SRST" section on page 31.