Table Of Contents
Configuring the SIP Proxy Server in Cisco Unified Presence Administration
Configuring Proxy Server Settings
Configuring the SIP Proxy Server in Cisco Unified Presence Administration
January 27, 2009
•Configuring Proxy Server Settings
Proxy Server Settings
You can configure SIP Proxy configuration parameters. Any time you modify these proxy server settings, you must shut down the SIP Proxy service in the Cisco Unified Presence cluster and restart services.
The following changes require you to restart SIP proxy services:
•Adding, deleting, or modifying the system server
•Modifying the SIP proxy server settings
•Adding, deleting, or modifying application listeners
•Adding, deleting, or modifying TLS context and TLS peer subjects
Warning While the proxy services are restarting, the Cisco Enterprise SIP proxy services drop any existing transactions and do not accept any new requests.
Configuring Proxy Server Settings
Use proxy server settings to configure settings for the SIP proxy server.
Procedure
Step 1 Select Presence > Routing > Settings.
Step 2 Select the proxy server configuration settings, as described in Table 16-1.
Step 3 Perform one of the following actions to save the data:
a. Click the Save icon that displays in the tool bar in the upper, left corner of the window.
b. Click Save at the bottom of the window.
Restarting Proxy Services
Some changes that you make in Cisco Unified Presence Administration require that you restart SIP proxy services before the change takes effect.
Before You Begin
Review Proxy Server Settings.
Procedure
Step 1 Select Presence > Routing > Settings.
Step 2 Click Restart All Proxy Services.
Step 3 Click OK when the confirmation window displays.