Press
Select and
Save to set the ringtone, or press
Cancel.
Adjust Phone Ringer Volume Level
Check with your system administrator to see if a minimum ringer volume setting was configured.
Procedure
Press while the handset is in the cradle and the headset and speakerphone buttons are off. The new ringer volume is saved automatically.
Change Ring Pattern (Flash-Only, Ring Once, Beep-Only)
Before you can access this setting, your system administrator might need to enable it for you.
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your call ring pattern settings.
Change Audible Voice-message Indicator
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your message indicator settings.
Change How Voice Message Light on Handset Works
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Choose
Change the Message Waiting Lamp policy.
Step 3
Access your message indicator settings. Typically, the default
system policy is to indicate a new voice message by displaying a steady light
on the handset light strip.
Phone Screen Customization
You can adjust the characteristics of the phone screen.
Contact your system administrator to see if this
optional feature is available to you. This feature enables you to turn off
phone screen illumination for a predetermined time (as set by your system
administrator).
If you change the brightness setting on your phone, do not unplug
the phone from its power source for at least one minute or the brightness
setting will not get saved.
Procedure
Step 1
Choose
> User
Preferences > Brightness.
Step 2
To make adjustments, press
Up,
Down, or
.
Step 3
Press
Save, or press
Cancel.
Change Background Image
Procedure
Step 1
Choose
> User
Preferences > Background Images.
Step 2
Scroll through available images and press
Select to choose an image.
Note
If you do not see any images, then this option has
not been enabled on your phone.
Step 3
Press
Preview to see a larger view of the background
image.
Step 4
Press
Exit to return to the selection menu.
Step 5
Press
Save to accept the image or press
Cancel.
Change Phone Screen Language
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your user settings.
Step 3
Select a language.
Change Line Text Label
Procedure
Step 1
Log in to your User Options web pages.
Step 2
Access your line text label settings.
Adjust Phone Screen Viewing Angle
Supported only on the Cisco Unified IP Phones7970G and 7971G-GE.
Feedback
while the handset is in the cradle and the headset and speakerphone buttons are off. The new ringer volume is saved automatically.