Table Of Contents
Preface
Overview
Audience
Organization
Related Documentation
Obtaining Documentation and Submitting a Service Request
Document Conventions
Preface
Overview
Cisco IP Phone 7970 Administration Guide for Cisco CallManager 3.3 provides the information you need to understand, install, configure, manage, and troubleshoot the Cisco IP Phone model 7970 on a Voice-over-IP (VoIP) network.
Because of the complexity of an IP telephony network, this guide does not provide complete and detailed information for procedures that you need to perform in Cisco CallManager or other network devices.
Audience
Network engineers, system administrators, or telecom engineers should review this guide to learn the steps required to properly set up the Cisco IP Phone 7970 on the network.
The tasks described are administration-level tasks and are not intended for end-users of the phones. Many of the tasks involve configuring network settings and affect the phone's ability to function in the network.
Because of the close interaction between the Cisco IP Phone and Cisco CallManager, many of the tasks in this manual require familiarity with Cisco CallManager.
Organization
This manual is organized as follows:
Chapter
|
Description
|
Chapter 1, "An Overview of the Cisco IP Phone"
|
Provides a conceptual overview and description of the Cisco IP Phone
|
Chapter 2, "Preparing to Install the Cisco IP Phone on Your Network"
|
Describes how the Cisco IP Phone interacts with other key IP telephony components, and provides an overview of the tasks required prior to installation
|
Chapter 3, "Setting Up the Cisco IP Phone"
|
Describes how to properly and safely install and configure the Cisco IP Phone on your network
|
Chapter 4, "Configuring Settings on the Cisco IP Phone"
|
Describes how to configure network settings, verify status, and make global changes to the Cisco IP Phone
|
Chapter 5, "Configuring Features, Templates, Services, and Users"
|
Provides an overview of procedures for adding users to the network, configuring corporate directories, and setting up web information services
|
Chapter 6, "Customizing the Cisco IP Phone"
|
Explains how to customize phone ring sounds, background images, and the phone idle display at your site
|
Chapter 7, "Viewing Model Information, Status, and Statistics on the Cisco IP Phone"
|
Explains how to view network model information, status messages, network statistics, and firmware information from the Cisco IP Phone
|
Chapter 8, "Monitoring the Cisco IP Phone Remotely"
|
Explains how to obtain status information about the phone using the phone's web page
|
Chapter 9, "Troubleshooting and Maintenance"
|
Provides tips for troubleshooting the Cisco IP Phone
|
Appendix A, "Providing Information to Users Via a Website"
|
Provides suggestions for setting up a website for providing users with important information about their Cisco IP Phones
|
Appendix B, "Supporting International Users"
|
Provides information about setting up phones in non-English environments
|
Appendix C, "Updating Firmware for the Cisco IP Phone 7970"
|
Explains how to update the firmware version for a phone
|
Appendix D, "Technical Specifications"
|
Provides technical specifications of the Cisco IP Phone
|
Index
|
Provides reference information
|
Related Documentation
For more information about Cisco IP Phones or Cisco CallManager, refer to the following publications:
Cisco IP Phone Models 7970
•
Cisco IP Phone 7970 Guide
•Regulatory Compliance and Safety Information for the Cisco IP Phone 7900 Series
Cisco CallManager Administration
•Cisco CallManager Administration Guide
•Cisco CallManager System Guide
•Cisco CallManager Serviceability Administration Guide
•Cisco CallManager Serviceability System Guide
•Bulk Administration Tool User Guide for Cisco CallManager
Cisco IP Phones Services and Features
•Cisco CallManager Features and Services Guide
http://www.ciscopress.com
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.
Document Conventions
This document uses the following conventions:
Convention
|
Description
|
boldface font
|
Commands and keywords are in boldface.
|
italic font
|
Arguments for which you supply values are in italics.
|
[ ]
|
Elements in square brackets are optional.
|
{ x | y | z }
|
Alternative keywords are grouped in braces and separated by vertical bars.
|
[ x | y | z ]
|
Optional alternative keywords are grouped in brackets and separated by vertical bars.
|
string
|
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
|
screen font
|
Terminal sessions and information the system displays are in screen font.
|
boldface screen font
|
Information you must enter is in boldface screen font.
|
italic screen font
|
Arguments for which you supply values are in italic screen font.
|
^
|
The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.
|
< >
|
Nonprinting characters, such as passwords are in angle brackets.
|
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.
Caution Means
reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Warnings use the following conventions:
|
Warning
|
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
|
Waarschuwing
|
BELANGRIJKE VEILIGHEIDSINSTRUCTIES
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.
BEWAAR DEZE INSTRUCTIES
|
Varoitus
|
TÄRKEITÄ TURVALLISUUSOHJEITA
Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.
SÄILYTÄ NÄMÄ OHJEET
|
Attention
|
IMPORTANTES INFORMATIONS DE SÉCURITÉ
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.
CONSERVEZ CES INFORMATIONS
|
Warnung
|
WICHTIGE SICHERHEITSHINWEISE
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.
BEWAHREN SIE DIESE HINWEISE GUT AUF.
|
Avvertenza
|
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.
CONSERVARE QUESTE ISTRUZIONI
|
Advarsel
|
VIKTIGE SIKKERHETSINSTRUKSJONER
Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.
TA VARE PÅ DISSE INSTRUKSJONENE
|
Aviso
|
INSTRUÇÕES IMPORTANTES DE SEGURANÇA
Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.
GUARDE ESTAS INSTRUÇÕES
|
¡Advertencia!
|
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.
GUARDE ESTAS INSTRUCCIONES
|
Varning!
|
VIKTIGA SÄKERHETSANVISNINGAR
Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.
SPARA DESSA ANVISNINGAR
|
|
|
|
|
|
|
|
|
