Feedback
|
Table Of Contents
Cisco Unified IP Conference Station 7937G Release Notes for Firmware Release 1.3(2)
Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager
Obtaining Documentation and Submitting a Service Request
Cisco Unified IP Conference Station 7937G Release Notes for Firmware Release 1.3(2)
November 20, 2008Use these release notes with a Cisco Unified IP Conference Station 7937G running firmware release 1.3(2).
Cisco Unified IP Conference Station 7937G is compatible with Cisco Unified Communications Manager releases 7.0, 6.1, 6.0, 5.1, 4.3, 4.2, and 4.1.
Contents
The release notes provide the following information:
•
Obtaining Documentation and Submitting a Service Request
Related Documentation
Cisco Unified IP Conference Station Documentation
Refer to publications that are specific to your language, conference station model and Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Cisco Unified Communications Manager Documentation
Refer to the Cisco Unified Communications Manager Documentation Guide and other publications specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
Cisco Unified Communications Manager Business Edition Documentation
Refer to the Cisco Unified Communications Manager Business Edition Documentation Guide and other publications that are specific to your Cisco Unified Communications Manager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/ps7273/tsd_products_support_series_home.html
New and Changed Information
The following information is new for Cisco Unified IP Conference Station 7937G running firmware release 1.3(2).
Compliance Information for Brazil
Installation Notes
Before you use Cisco Unified IP Conference Station 7937G with Cisco Unified Communications Manager 7.0, 6.1, 6.0, 5.1, 4.3, 4.2, and 4.1, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.
To load and install the required firmware image for the Cisco Unified IP Conference Station 7937G on Cisco Unified Communications Manager 7.0, 6.1, 6.0, 5.1, 4.3, 4.2, and 4.1, follow these steps:
Procedure
Step 1
Go to the following URL:
http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240
Step 2
To download the firmware for Cisco Unified IP Conference Station 7937G, click one of the following hyperlinks and follow the prompts:
•
For Cisco Unified Communications Manager 4.3 and earlier:
cmterm-7937-sccp.1-3-2.exe
•
For Cisco Unified Communications Manager 5.1(1) and later:
cmterm-7937-sccp.1-3-2.cop.sgn
Step 3
To download the Readme file, which contains installation instructions for the corresponding firmware, go back to the URL shown in Step 1 and click the appropriate hyperlink.
cmterm-7937-sccp.1-3-2-readme.htm
Step 4
Follow the instructions in the Readme file to install the firmware.
Registering the Cisco Unified IP Conference Station with Cisco Unified Communications Manager
To register the Cisco Unified IP Conference Station 7937G with Cisco Unified Communications Manager release 7.0, 6.1, 6.0, 5.1, 4.3, 4.2, and 4.1, follow these steps:
Procedure
Step 1
Log in to the Cisco Unified Communications Manager Administration application.
Step 2
From the menu bar, choose Device > Phone.
The Find and List Phones window appears.
Step 3
Click Add New.
The Add a New Phone window appears.
Note
Depending on the Cisco Unified Communications Manager version you have, you may have to click Add a New Phone instead.
Step 4
Select the Cisco 7937 phone type from the drop-down menu and click Next.
The Phone Configuration window appears.
Step 5
In the Phone Configuration window, enter information in the following fields:
•
MAC Address
•
Device Pool
•
Phone Button Template
•
Device Security Profile
Note
Depending on the Cisco Unified Communications Manager version you have, some fields may not display.
Step 6
Click Save.
Important Notes
This section contains information on resolved defects for the Cisco Unified IP Conference Station 7937G. Firmware release 1.3(2) includes enhancements for the conference station according to the RFC 2833 specification. Refer to CSCsm04577 for more information.
Caveats
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•
All severity level 1 or 2 bugs
•
Significant severity level 3 bugs
You can search for problems by using the Cisco Software Bug Toolkit.
To access the Bug Toolkit, you need the following items:
•
Internet connection
•
Web browser
•
Cisco.com user ID and password
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1
To access the Bug Toolkit, go to the following URL:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Step 2
Log in with your Cisco.com user ID and password.
Step 3
To look for information about a specific problem, enter the bug ID number in the "Search for Bug ID" field, then click Go.
For information about how to search for bugs, create saved searches, create bug groups, etc., click Help in the Bug Toolkit page.
Open Caveats
Table 1 lists Severity 1, 2, and 3 defects that are open for the Cisco Unified IP Conference Station 7937G using firmware release 1.3(2).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 1 Open Caveats for the Cisco Unified IP Conference Station 7937G
Resolved Caveats
Table 2 lists Severity 1, 2, and 3 defects that are resolved for the Cisco Unified IP Conference Station 7937G using firmware release 1.3(2).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 2 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Documentation Updates
The following update applies to the "Understanding Buttons and Hardware" section in the "An Overview of Your Conference Station" chapter of the Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0.
•
For the LED indicators item, the description of the flashing green indicator should say "Flashing green: Incoming Call (Ringing/Connecting)."
The following update applies to the "Connecting Your Conference Station" chapter in the Cisco Unified IP Conference Station 7937G Phone Guide for Cisco Unified Communications Manager 6.0 and the "Setting Up the Conference Station" chapter in the Cisco Unified IP Conference Station 7937G Administration Guide for Cisco Unified Communications Manager 6.0.
•
Replace all references to an "optional mobile conference station device" with
"optional third-party wireless microphone kit."Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, the Cisco logo, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0809R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2008 Cisco Systems, Inc. All rights reserved.
© 2008 Polycom, Inc. All rights reserved. 1725-40073-001 Rev. A3
Feedback
