Cisco Unified IP Phone 7906G and 7911G are full-feature telephones that provide voice communication over the same data network that your computer uses, allowing you to place and receive calls, put calls on hold, transfer calls, make conference calls, and so on.
In addition to basic call-handling features, your Cisco Unified IP Phone 7906G and 7911G can provide specialized or advanced telephony features that extend your call-handling capabilities. Depending on the configuration, your phone supports:
Access to network data, XML applications, and web-based services.
Online customizing of phone features and services from your Cisco Unified Communications Manager User Options web pages.
You can use the following figures and table to identify the buttons and hardware on your phone.
Displays phone menus and call activity including caller ID, call duration, and call state.
Cisco Unified IP Phone series
Indicates your Cisco Unified IP Phone model series.
Each activates a softkey option displayed on your phone screen.
Allows you to scroll through menu items and highlight items. When the phone is on hook, displays your Speed Dials.
Applications Menu button
Displays the Applications menu that provides access to a voice message system, phone logs and directories, settings, services, and help.
Places the active call on hold, resumes a call on hold, and switches between an active call and a call on hold.
Allows you to dial phone numbers, enter letters, and choose menu items.
Controls the handset, headset, speaker, and ringer volume.
Handset with light strip
The light strip on the handset indicates an incoming call or new voice message.
Allows the phone to stand at a convenient angle on a desk or table.
Line and Call Definitions
calls can be easily confused, refer to these descriptions:
Lines—Each line corresponds to a phone number (or extension) that
others can use to call you. Your phone can support one line.
Calls—Each line can support multiple calls.
By default, your phone supports up to six connected calls, but your system
administrator can adjust this number according to your needs. Only one call can
be active at any time; other calls are automatically placed on hold.
Use the Applications menus to access phone features.
If you want to...
Access the Applications menus
to display a list of
Applications: Messages, Directory, Settings, Services, and Help.
Scroll through a list or menu
Select a menu item
to highlight a menu item, then
Select. You can also press the number
on the keypad that corresponds to the number for the menu item.
Go back one level in a menu
Exit. (Note that if you press
Exit from the top-level of a menu, the
menu will close.)
Close a menu (and return to the Applications menu)
Exit one or more times until the menu
closes, or press
Exit the Applications menu
After you press
, the LED turns green and stays
lit while you are using the Applications menus. If you depart from an
application without pressing
Exit (for example, to answer a new call), the
phone screen display may change but the
button stays green. If you press
again, the application resumes at the point when it was interrupted.
Phone Help System
The Cisco Unified IP Phone 7906G and 7911G provides a
comprehensive online help system. To view the phone help, press
Depending on your phone system configuration, features included in this Phone Guide might not be available to you or might work differently on your phone. Contact your support desk or system administrator for information about feature operation or availability.
SIP and SCCP Signaling Protocols
Your phone can be configured to work with one of two signaling
protocols: SIP (Session Initiation Protocol) or SCCP (Skinny Call Control
Protocol). Your system administrator determines this configuration.
Phone features can vary depending on the protocol. This Phone
Guide indicates which features are protocol-specific. To learn which protocol
your phone is using, you can contact your system administrator or you can choose
>Model Information > Call
Control Protocol on your phone.
Your phone supports the Cisco EnergyWise program. Your system administrator sets up sleep (power down) and wake (power up) times for your phone to save energy.
Ten minutes before the scheduled sleep time, if audible alert is enabled by your system administrator, you hear your ringtone play. The ringtone plays according to the following schedule:
At 10 minutes before power down, the ringtone plays four times
At 7 minutes before power down, the ringtone plays four times
At 4 minutes before power down, the ringtone plays four times
At 30 seconds before power down, the ringtone plays 15 times or until the phone powers off
If your phone is inactive (idle) at the sleep time, you see a message to remind you that your phone is going to power down. To keep the phone active, press any key on the phone. If you do not press any key, your phone powers down.
If your phone is active (for example, on a call), your phone waits until it has been inactive for a period of time before informing you of the pending power shutdown. Before the shutdown happens, you see a message to remind you that your phone is going to power down.
At the scheduled time, your phone powers up. To wake up the phone before the schedule time, contact your administrator.
Wake and sleep times are also linked to the configured days that you normally work. If your requirements change (for example, your work hours or work days change), see your system administrator to have your phone reconfigured.
For more information about EnergyWise and your phone, contact your system administrator.