 Feedback
|
Table Of Contents
Cisco Unified IP Phone 7905G/7912G Release Notes for Firmware Release 8.0(3) (SCCP)
Obtaining Documentation, Obtaining Support, and Security Guidelines
Cisco Product Security Overview
Cisco Unified IP Phone 7905G/7912G Release Notes for Firmware Release 8.0(3) (SCCP)
April 23, 2007
Use these release notes with the Cisco Unified IP Phones 7905 and 7912G for firmware release 8.0(3) running on Cisco Unified CallManager versions 5.0, 4.2, 4.1, 4.0, and 3.3 (SCCP).
Contents
These release notes provide the following information. You might need to notify your users about some of the information provided in this document.
•
Obtaining Documentation, Obtaining Support, and Security Guidelines
Related Documentation
Cisco Unified IP Phone Documentation
Refer to publications that are specific to your language, phone model and Cisco Unified CallManager release. Navigate from the following documentation URL:
http://www.cisco.com/en/US/products/sw/voicesw/tsd_products_support_category_home.html
Cisco Unified CallManager Documentation
Refer to the Cisco Unified CallManager Documentation Guide and other publications specific to your Cisco Unified CallManager release. Navigate from the following URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.htm
New and Changed Information
Cisco Unified IP Phone firmware release 8.0(3) supports several releases of Cisco Unified CallManager, including thes releases—versions 4.2 and 5.0. For a complete list of new and changed phone features introduced in these Cisco Unified CallManager versions, refer to the Release Notes for Cisco Unified CallManager 4.2 and the Release Notes for Cisco Unified CallManager 5.0. See the "Related Documentation" section for help locating these documents.
Note
Installation Notes
Before using the Cisco Unified IP Phones 7905G and 7912G with Cisco Unified CallManager release 3.3.2 or later, you must install the latest firmware on all Cisco Unified CallManager servers in the cluster. The firmware image names are:
•
•
Note
To install the firmware, follow these steps:
Procedure
Step 1
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser
Step 2
•
–
–
•
–
–
•
–
–
Step 3
•
•
Step 4
Caveats
This section contains these topics:
Using Bug Toolkit
Known problems (bugs) are graded according to severity level. These release notes contain descriptions of:
•
•
You can search for problems by using the Cisco Software Bug Toolkit.
To access Bug Toolkit, you need the following items:
•
•
•
To use the Software Bug Toolkit, follow these steps:
Procedure
Step 1
Step 2
Step 3
Step 4
Open Caveats
Table 1 lists Severity 1, 2 and 3 defects that are open for Cisco Unified IP Phone 7905G and 7921G using firmware release 8.0(3).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 1 reflects a snapshot of the defects that were open at the time this report was compiled. For an updated view of open defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 1 Open Caveats for Cisco Unified IP Phone 7905G/7912G for Firmware Release 8.0(3)
Cisco Unified IP Phone 7905 reboots when Cell Pickup Service option is selected
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsd90748
Data Virtual LAN (VLAN) traffic is dropped or discarded with GigabitEthernet Netrwork Interface Cards (NICs) set to Auto
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi48004
Resolved Caveats
Table 2 lists Severity 1, 2 and 3 defects that are resolved for Cisco Unified IP Phone 7905G and 7921G using firmware release 8.0(3).
For more information about an individual defect, you can access the online record for the defect by clicking the Identifier or going to the URL shown. You must be a registered Cisco.com user to access this online information.
Because defect status continually changes, be aware that Table 2 reflects a snapshot of the defects that were resolved at the time this report was compiled. For an updated view of resolved defects, access Bug Toolkit as described in the "Using Bug Toolkit" section.
Table 2 Resolved Caveats for Cisco Unified IP Phone 7905G/7912G for Firmware Release 8.0(3)
Cisco Unified IP Phone 7905G and 7912G directory number incorrectly returns Under DeviceInformationX
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsb76616
Cisco Unified IP Phone 7912 calling number is missing from received call history
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg21329
Cisco Unified IP Phone 7912G does not boot up after firmware upgrade
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg33911
Cisco Unified IP Phone 7912G and 7905G have different behavior after recovery from the Dynamic Host Configuration Protocol (DHCP) issue
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg48291
Cisco Unified IP Phone 7912G Dual Tone Multi Frequency (DTMF) transmit fails
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsg67466
Cisco Unified IP Phone 7912G cannot access corporate directory with French locale
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh21722
Cisco Unified IP Phone 7912 should retry after HTTP refresh fails
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh31976
HTTP URL requested by Cisco Unified IP Phone 7912 misses variable name
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsh97445
Cisco Unified IP Phone 7912 (United Kingdom Locale) files download every time the IP Phone reboots
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi03943
Cisco Unified IP Phone 7912 using Firmware Release 8.0(2) SCCP resets when accessing Corporate Directory or other XML
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi22118
Cisco Unified IP Phone 7912 increases the number of digits displayed for external phone number mask
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi32679
Incorrect chunk size in HTTP encoding for `StreamingStatisticsX'
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi33314
The memory space of version string is smaller than the macro definition
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsi40995
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Cisco Product Security Overview
This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html. If you require further assistance please contact us by sending email to export@cisco.com.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2007 Cisco Systems, Inc. All rights reserved.
